Pumps
- For pumping rainwater, slightly polluted water and domestic waste water without faeces
- Engine jacket cooling
- Flat intake with removable sieve foot
- For conveying lightly acidic condensate, aggressive or saline media (max. 10% salt content)
- Engine jacket cooling
- Flat intake with removable sieve foot
- Plancofix is a VDE-tested floor drainage pump that makes it possible to install ground-level/low showers in places where this was previously impossible because of a lack of downward incline
- Inlet from above as floor drainage or from side (e.g. with existing shower channel)
- Reversible cover in stainless steel or as tile
- For pumping waste water into collection tanks for ground water or for lifting waste water from household machines such as dishwashers and washing machines (boiling process)
- For commercial applications
- Pump housing: stainless steel
- For pumping heavily contaminated water. Waste water containing fibres, like that which is produced in laundries or communal washing facilities. Domestic machines such as dishwashers and washing machines (cooking process) can be pumped with these pumps
- For commercial applications and hot water
- Pump housing: grey cast iron
- Suitable for pumping heavily contaminated water up to 90°C. Like that which is produced in laundries or communal washing facilities. As well as for commercial dishwashers and washing machines
- Pump housing: grey cast iron
- Motor housing: stainless steel
- Delivery of faecal wastewater from manholes
- Submersible sewage pump made of grey cast iron in explosion-proof design
- For stationary installation
- Suitable for rainwater, slightly polluted water and domestic waste water from e.g. household dishwashers and washing machines (heating process)
- Pump housing: Stainless steel
- With float switch
- Suitable for waste, rain, ground, seepage and drainage water
- Pump housing: Stainless steel
- Without float switch
- Suitable for waste, rain, ground, seepage and drainage water
- Pump housing: Stainless steel
- Without float switch
- Suitable for waste, rain, ground, seepage and drainage water
- Pump housing: Stainless steel
- With float switch
- Suitable for waste, rain, ground, seepage and drainage water
- Pump housing: Stainless steel
- With float switch
- Suitable for drainage / waste water (free of faeces)
- Pump housing: Stainless steel
- Voltage 400 V/50Hz without plug
- Suitable for drainage / waste water (free of faeces)
- Pump housing: Stainless steel
- With float switch
- The Plancofix is a VDE-tested floor drain pump with shower channel that allows level/low showers to be installed even in places where it was previously not possible due to a lack of slope
- Complete set with pre-mounted sealing fleece
- The stainless steel channel can be shortened as required
- For discharging condensation from gas oil condensing boilers (up to 100 kW) and air conditioning systems
- Ready to plug in
- Integrated backflow preventer
- Suitable for pumping dirty water and groundwater, in shafts with rainwater, drainage water and seepage water and also for liquid fertilisers without faeces as well as abrasive media
- Engine jacket cooling
- Flat intake with removable sieve foot
- Complete set for drainage
- For drainage shafts from ø 280 mm
- Pumps U6 Drain ES
- Suitable for rainwater, slightly polluted water and domestic waste water from e.g. household dishwashers and washing machines (heating process)
- Pump housing: Stainless steel
- Without float switch
- Suitable for rainwater, slightly polluted water and domestic waste water from e.g. household dishwashers and washing machines (heating process)
- Pump housing: Stainless steel
- With vertical float switch
- Suitable for drainage / waste water (free of faeces)
- Pump housing: Stainless steel
- Without float switch
- Suitable for drainage / waste water (faecal-free)
- Pump housing: stainless steel
- With float switch
- Flat suction up to a residual water level of 2 mm, for a wipe-dry surface
- Ideal for clear water from basements, pools or flat roofs
- Pump housing: aluminium
- Flat suction up to a residual water level of 2 mm, for a wipe-dry surface
- Ideal for clear water from basements, pools or flat roofs
- Pump housing: aluminium
- Suitable for Compli 400
- Ref. no.: JP50469 (replacement for JP45778)
- Sliding pipe for raising and lowering the Pumps, enables easy maintenance or replacement of the Pumps
- Compatible with waste water pumps U3 KS, U3 KS Special, U5 KS and U6 K ES
- Pressure connection: 38-42 mm via rubber sleeve