Bits, Drills, Cutting, grinding

- Application: Alloyed and unalloyed steel, copper, brass, aluminium, plastics- Shank: Cylindrical- Design: Break-resistant due to high elasticity and toughness, point angle 118°- DIN: 338 RN ...

• Application: longitudinal and transverse cuts
  
• Tooth shape: carbide-tipped interchangeable tooth
  
• Suitable machines: handheld and table circular saws

• Material to be cut: wood materials with inclusions, wood wool panels, aerated concrete, laminate, plasterboard
  
• Application: for the toughest applications in construction
  
• Tooth shape: carbide-tipped trapezoidal tooth
  

• Material to be cut: wood, plastic and cement fibre boards
  
• Application: for longitudinal and transverse cuts in materials that are difficult to machine and that subject tools to wear
  
• Tooth shape: flat
  

• Application: reinforced concrete, concrete, sand-lime brick, brickwork, masonry, natural stone, marble
  
• Shaft: SDS-Max
  
• Design: 3-cutter (curved shape)

• Application: aerated concrete, insulation materials, sand-lime brick, brickwork, masonry, natural stone, concrete
  
• Shaft: cylindrical
  
• Design: diamond-ground carbide lateral cutting edge

• Maximum comfort through 100% tool-free accessory change
  
• Acoustic click signal when correctly mounted
  
• Easy disassembly with X-Lock angle grinders. Just operate the lever and then the accessory part can be removed
  

• Area of application: soft concrete, soft tiles, wood, plastic, thin sheet metals and aluminium
  
• Shaft: cylindrical
  
• Design: easy drilling with Carbide tip

• Application: steel, wood, plastic, acrylic
  
• Shaft: 3-face shaft
  
• Design: stepped tip with 118° split point
  

• For equalising, deburring, surface machining, edge machining, weld seam machining, gradual fine sanding
  
• Grit: corundum A-COOL

• ø 50 mm
  
• For grinding and removing burrs on metal
  
• PU = 25 pieces

• ø 50 mm
  
• For grinding and removing paints on metal
  
• PU = 25 pieces

• Suitable machines: hand-held circular saws

• Suitable for 80 080 26 and 80 218 18
  
• In Box
  
• PU = 10 pieces

• Suitable for 80 080 26 and 80 218 18
  
• In Box
  
• PU = 10 pieces

- Application: Masonry, concrete and reinforced concrete- Shank: SDS-Plus- Design: 4-cutter with solid carbide head ...

• Area of application: unalloyed and alloyed steels up to 900 N/mm², aluminium, brass
  
• Shank: VARIO Bits shank 1/4"
  
• Design: impact screwdriver-compatible cutting geometries with TiAIN coating
  

- Tough, for universal use ...

• - Tough, for universal use
  
• For holder F 6.3

• Impactor, diamond-coated
  
• Specially developed to withstand high machine forces
  
• PU = 10 units
  

• Impactor, diamond-coated
  
• Specially developed to withstand high machine forces
  
• PU = 10 units
  

• Toothing 3 (DIN MY):
  
• For general work such as deburring, milling, smoothing edges with a clean surface
  
• For steel with high strength, weld seams

• Application: for tough and hard materials such as rust and acid-resistant chrome-nickel steels, copper, brass, aluminium, plastic
  - Particularly suitable for: Steels < 1,300 N/mm²
  - Suitable for: Stainless steels, steels <850 N/mm²
  
• Shaft: cylindrical
  
• Design: 5% cobalt alloyed with reinforced core diameter
  

• Application: alloy and non-alloy steels, grey cast iron, malleable cast iron, copper alloys, nickel silver, graphite, sintered iron
  Steels < 1,100 N/mm2, copper, brass, aluminium, plastics
  
• Shaft: cylindrical
  
• Design: With split point with 118° angle
  

• Application: For drilling alloy and non-alloy steels and cast steel, grey cast iron, malleable cast iron, copper alloys, nickel silver, graphite, sintered iron
  - Particularly suitable for: steels < 850 N/mm², grey cast iron
  - Suitable for: Steels < 1,100 N/mm2, copper, brass, aluminium, plastics
  
• Shaft: with Morse taper
  
• DIN: 345RN

• Area of application: For concrete, natural stone and masonry
  
• Shaft: SDS-Plus
  
• Design: 2-cutter

• Area of application: concrete, natural stone, masonry
  
• Shaft: SDS-Max
  
• Design: with shot blast hardening, heavy-duty carbide tip
  

• Blade length (mm): 390
  
• 5.4 teeth per inch for sawing thicker branches and for coarser cuts
  
• Suitable for pruning and trimming work in gardening and landscaping
  

• Prevents reattachment with freewheel mechanism
  
• Max. torque (Nm): 10

• Prevents cut edges tearing

• Material to be cut: wood with (hardened) nails/metal (5-175 mm), wood with steel elements (5-175 mm), cast steel pipes (ø < 6"), GRP/epoxy (< 175 mm)
  
• Application: for demolishing a wide range of materials
  
• Tooth pitch (mm): 6.0-8.0
  

• Internal hole ø (mm): 25 / 22.2

Tile drill Alpen C-Protector- Application: For extremely hard porcelain stoneware tiles up to Mohs/Ritz hardness 9 as well as glass and porcelain- Spindle speed: Max. 600 rpm- Not suitable for percussion drilling- No cooling required- ø (mm): 6/8/10Hammer drill Force X- Application: For drilling in ...