Compressed air
Multiple variants
Polishing pad for pneumatic mini polisher 82 008 31
Only a few items left in stock
- Hard for polishing in the first stage
- Soft for polishing in the second stage
- Suitable for ATTIX 350/360
Multiple variants
Compressed air oiler 483 variobloc
Only a few items left in stock
- For measured enrichment of compressed air with finely atomised oil mist
- A control valve allows the proportional addition of the oil for the flow rate
- The drop quantity is controlled using the adjustment screw of the oiler attachment
Multiple variants
Compressed air ball valve model 487 variobloc
Only a few items left in stock
- Suitable for flange-mounting or as main shut-off valve on variobloc maintenance units
- With vent
- Actuation by 90° rotation of the lever
Multiple variants
Type A, stainless steel V2A
Immediately available
- Back width (mm): 12.9
- Wire gauge (mm): 0.65 x 0.95
Multiple variants
Type ALK, bronzed steel
Immediately available
- Bronze plated steel head
- Wire size ø (mm): 0.64
Multiple variants
Finishing nails type J, stainless steel V2A
Immediately available
- Wire gauge (mm): 1.0 x 1.25
Multiple variants
Type WP, heavily galvanised-resin-coated
Only a few items left in stock
- Wire gauge (mm): 1.8 x 2.08
- Back width (mm): 26.7
- ETA approval
Multiple variants
Type WP, stainless steel V2A
Immediately available
- Wire gauge (mm): 1.8 x 2.08
- Back width (mm): 26.7
- ETA approval
Multiple variants
Type WS, galvanised-resin-coated
Only a few items left in stock
- Wire gauge (mm): 1.4 x 1.6
- Back width (mm): 26.5
Multiple variants
Type Z, galvanised-resin coated
Immediately available
- Wire gauge (mm): 1.4 x 1.6
- Back width (mm): 11.20
Multiple variants
Type Z, stainless steel V2A
Only a few items left in stock
- Wire gauge (mm): 1.4 x 1.6
- Back width (mm): 11.20
- ETA approval
Multiple variants
Plastic Cup for Lubricator
Immediately available
- For oilers without drain valve
70 005 81
Test case for measuring pressure shocks
Immediately available
- For the measurement of pressure shocks in drinking water systems, even over a longer period
- For measuring, a T-piece is placed between the angle valve and the fitting
- Manometer with drag pointer
82 004 43
Pneumatic ratchet wrench HAZET 3/8" length 175mm NW 7.2, 70 Nm
Immediately available
- Max. tightening torque (Nm): 70
- Coupling plug: NW 7.2
- Air requirement (l/min): 180
82 004 44
Pneumatic ratchet screwdriver Hazet 1/2" length 270mm NW 7.2, 70Nm
Immediately available
- Max. tightening torque (Nm): 70
- Coupling plug: NW 7.2
- Air requirement (l/min): 180
82 005 93
Spare parts set for cleverpaint
Immediately available
- Consisting of:
- 2 x nozzle seal
- Sealing cone
- Spare nut
- Dosing sleeve
- Valve insert
- Dosing valve
- 2 x replacement spring
- Spring retainer
- Needle seal set
- Handle screw
- Handle nut
- Nozzles bush
82 006 61
Prebena 10X-RK130 pneumatic strip nailer
Only a few items left in stock
- Area of application: timber trusses, prefabricated house construction, substructure, frame construction, roof battens, crates, pallets, etc.
- Air consumption: 4.3 l/nailing
- Release type: single shot release with release safety device
82 006 62
Prebena 10X-RK160 pneumatic strip nailer
Only a few items left in stock
- Area of application: timber trusses, prefabricated house construction, substructure, frame construction, roof battens, crates, pallets, etc.
- Air consumption: 4.9 l/nailing
- Release type: single shot release with release safety device
82 008 17
Pneumatic angle grinder HAZET ø 125 mm, 1/4" IT incl. NW 7.2
Immediately available
- Output (watts): 671
- Idle speed (rpm): 12000
- Grinding disc ø (mm): 125
84 014 84
HAZET lambskin bonnet
Only a few items left in stock
- Suitable for ATTIX 350/360
- PU = 5 pieces