intercal
10 002 13
Burner cover suitable for Intercal SLV 100/110 B and BNR 100/110
Immediately available
10 002 30
Burner cover for SGN 100/110
Currently not in stock
Multiple variants
Pressure monitor for multiple actuators GW 50 A5
Immediately available
- Suitable for gas multi block and dual solenoid valves DMV
- Overpressure monitor, single-acting for gas families
1, 2 and 3 - Attachment design with adjustable switching point
Multiple variants
Connection cable 2P-600, straight design
Immediately available
FZ 711 and MZ 770, Can be plugged in, 2-pin, ...
Multiple variants
Ersatzteile passend für Intercal Gasbrenner SGN(F) 100H/110H
Immediately available
Multiple variants
Oil burner hose
Immediately available
- DN 10 (3/8") union nut x DN 10 (3/8") union nut with pipe bend 90°
Multiple variants
Heat exchanger
Only a few items left in stock
- Scope of delivery:
- Seal sets for flow and return
Multiple variants
Flame sensor QRB 1 B-A068B70B / A148B70B
Currently not in stock
- High sensitivity
- Housing length: 50 mm
- With plugs
Multiple variants
Flame sensor MZ 770 S
Immediately available
Multiple variants
Ignition cable
Immediately available
- Suitable for Buderus/Sieger:
- BE/BE-A
- BRE/BDE/SRE - Connection: 4 x 4 mm
Multiple variants
Flicker detector QRC
Immediately available
Multiple variants
Spare parts suitable for Intercal burner SLV 10 B
Immediately available
Multiple variants
Magnesium anode for TSH hot water tank
Only a few items left in stock
- Suitable for intercal®: Hot water tank TSH Silver
- Connection: M8 x 30
- TSH 150
- Dimensions: 400 x ø 33 mm
- Ref. no.: 88.50010-8015
TSH 200
Multiple variants
motor connection cable
Immediately available
- For AEG/Hanning/Aaco motors
Multiple variants
Spare parts suitable for Intercal burner BN 10
Immediately available
Multiple variants
Ersatzteile passend für Intercal Brenner BNR 10
Immediately available
Multiple variants
Spare parts suitable for Intercal burner SGN 10
Immediately available
Multiple variants
Flange seal, suitable for Intercal: SL(V)10(B), SL(V)11-22, SGN(F)10
Immediately available
- Suitable for intercal®: SL(V)10(B), SL(V)11-22, SGN(F)10
- Dimensions: ø 80 x 146 x 5 mm
- Ref. no.: 88.70400-0010
Multiple variants
Infrared flicker detector IRD 1010 (oil)
Immediately available
The IRD 1010 replaces the versions IRD 810 / 910 / 911 / 911vi (in conjunction with plug cable).Das IRD 1020 replaces version 920. A plug cable and the magnetic bracket is M93 is required, without which the device switches off.Important:When ordering an INFRARED FLACKER DETECTOR please take the ligh ...
20 000 60
Burner motors intercal® 88.70030-0040
Currently not in stock
- Suitable for Intercal BN20, SLV 22B/33B
- 110 W, 230 V/50 Hz
- 1-surface
20 000 65
Oil burner control units LMO 14.113 C2
Immediately available
LMO ... ...
20 005 34
Sensor cable 600 mm for IRD 1010/1020 3-pin angled*
Immediately available
- Suitable for IRD 1010/1020
- 3-pole
- Length: 600 mm
20 015 20
Socket AGK 11 for BHO 61, 62D, 64 LOA, LGA, LGB, LMG, LMO
Immediately available
- For Siemens LOA, LMO, LGA, LGB, LMG and LME
- For Danfoss BHO 61, 62 D and 64
- With 12 connection terminals
20 015 21
Stainless steel push-in fitting bend 90° (f/m) 18 mm
Immediately available
- For device sockets with 5 cable guides PG 11
20 030 82
Intercal ionisation electrode for SGN(F) 77-88/2
Only a few items left in stock
- Isolator: 10.8 x 110 mm
- Wire ø: 3.5 mm
- Wire length: 25 + 105 mm
20 030 83
Intercal ignition electrode for SGN(F) 77-88/2
Only a few items left in stock
- Suitable for Intercal: SGN(F) 77-88/2
- Isolator: 25 x 46 mm
- Wire ø: 1.8 mm
Multiple variants
Automatic gas firing system LME
Immediately available
LME... replace the LMG automatic firing devices in the same housing... see table. With fault diagnostics. ...
Multiple variants
Suitable for Intercal burner SLV 100 B
Immediately available
Multiple variants
Ersatzteile passend für Intercal Brenner BNR 100 / 110
Immediately available
23 001 09
Connection cable for oil pre-heater 4-core Length 700 mm
Immediately available
- Suitable for Danfoss, Satronic and Viskostat oil pre-heater
- 4-pin
- Length: 700 mm
23 017 04
Burner nozzle Danfoss 2.25/60°B
Only a few items left in stock
- Suitable for intercal®: SLV 11...33
- With scale angle for flame tube length 110 mm!
- Ref. no.: 88.70125-0030
23 017 06
Oil pre-heater for Intercal for SLV 11-33, BN 20
Immediately available
- Suitable for intercal®: SLV(V)11, SLV22B, SLV33/2B, BNR 20 - 2
- Ref. no.: 88.70125-0080
23 017 07
Oil pre-heater fits Intercal SLV/BN/BNR 255mm
Immediately available
- Suitable for Intercal: SLV100/110B and BNR100/110
- Ref. no.: 88.70125-0058 replaces 0056
24 001 88
Light tube end piece intercal® 88.70145-0680
Immediately available
24 001 89
Flame tubes 200mm intercal® 88.70335-0022
Currently not in stock
24 002 22
O-ring 21.89 x 2.62mm
Only a few items left in stock
- Suitable for Intercal: Kromschröder gas fitting on SGN(F) 100H /110H
- Dimensions: 21.89 x 2.62 mm
- Ref. no.: 88.70205-0610