GSR and Danfoss replacement solenoid coils
- For EV210B, EV220B, IP 00 *)
* Coils 042N with socket 042N0156 = IP 65 - Power consumption at switch-on a.c.: 39 VA, switched-on a.c.: 19 VA
- Max. ambient temperature: 40 °C
- With terminal box for EV210B, EV220B, EV250B, IP 67, ED 100%
- Power consumption at switch-on AC: 40 VA
- Switched-on a.c.: 18 VA,
- For EV210B, EV220B, EV250B, IP 67, duty cycle 100%
- Power consumption at switch-on a.c.: 40 VA, switched-on a.c.: 18 VA
- Anchor ø: 13.5 mm
- For GSR solenoid valve
- Suitable for model:
Model 1 | D4322 1002 012: DN 10 (3/8")
Model 2 | D4323 1002 012: DN 15 (1/2")
- For GSR solenoid valve
- Suitable for model:
Model 1 | A4324 1002 702: DN 20 (3/4")
Model 2 | A4325 1002 702: DN 25 (1”)
Model 3 | A3521-23 Model 702: DN 8-15 (1/4" - 1/2”)
- For Danfoss magnetic coils with AMP insertion tongues type BA/BD
- Ambient temperature range: -40°C to + 125°C
- For cable diameter: 4-9 mm
- For GSR solenoid valve
- Voltage: 230 V a.c.
- Rectifier (plug): Yes
- For EV210B, EV220B, EV250B, IP 20, ED 100%
- Power consumption at switch-on AC: 40 VA, switched-on a.c.: 18 VA
- Anchor ø: 13.5 mm
- For low-noise operation, version with 1 m three-wire cable
- IP 67
- Rectifier integrated into terminal box, hum-free coil
- Voltage: 230 V AC
- Frequency: 50 Hz
- Power consumption: 14.5 / 10.5 VA
- Suitable for GSR solenoid valve coil (95 009 17 / 95 009 18 / 95 009 25)
- With bridge rectifier and Varistor suppressor circuit