Draught regulator, exhaust accessories

- For sealing and bonding plastics and metals in industry.- Skin forming time: 10 - 20 min.- Temperature resistant: -50 °C to +80 °C- Tensile strength: 0.9 MPa- Shore hardness A 30- Good UV resistance- Good adhesion- Excellent UV and weather resistance- Free of solvents, isocyanates, silicones and ...

• Stainless steel V4A, surface glossy
  
• Sheet thickness 0.6 mm
  
• Mineral wool, hydrophobic (moisture resistant against flue gas condensate)
  

• V4A stainless steel
  
• With saddle and snap lock
  
• 130 mm

• Made of biodegradable fibres, free of ceramic fibres
  
• Temperature-resistant: 1100°C
  
• Sound-absorbing
  

• For boilers, boiler elements, ovens and stoves
  
• For assembly and sealing
  
• Flameproof up to 1000°C

• For sealing ovens, stoves, flue tubes, boiler doors, plates,...
  
• Glass-fibre reinforced
  
• Temperature-resistant up to max. 550°C

• For sealing ovens, stoves, flue tubes, boiler doors, and plates
  
• Loosely rotated
  
• Temperature-resistant up to max. 500°C

• As a seal for burner flanges, boiler doors
  
• For insulating pipelines and cables from heat and cold
  
• High tensile strength
  

• Made of V4A stainless steel
  
• Condensate drain DN15 (½") with plug
  
• Sheet thickness: 1.0 mm
  

• Prevents impact sound vibrations and absorbs heat expansion
  
• Pipe sleeve made of stainless steel with clamping lock to both sides to adjust the diameter (difference may be up to 10 mm)

• Installation and connection accessories for Z 130-Z 180
  
• Made of stainless steel
  
• With belt groove and collar
  

• Made of stainless steel
  
• Suitable for KW draught limiter type Z
  
• For retrospective attachment to a flue gas pipe that runs on any slope

• Control wheel and housing made entirely of stainless steel, brass setting weights
  
• Damping to prevent the control wheel swinging
  
• For chimney mounting with the KW pipe chuck or flue gas pipe mounting with the KW connection piece
  

• Blow-by device with automatic function in accordance with DIN 4795
  
  
• V2A Stainless steel
  
• With round connection support
  

• Made of stainless steel
  
• For chimney installation

• Made of stainless steel
  
• Suitable for draught limiter Z 150, Z 150 S and ZUK 150 S
  
• With quick release connector

• If the natural draught is too weak, the INJEKT chimney fan ensures a steady and optimal draught in the chimney. The INJEKT chimney fan is mounted on the chimney outlet.
  Flue gas systems and chimneys have to be designed in a way that always ensures the negative pressure which is necessary for a safe flue gas evacuation.
  The rotational speed of the chimney fan can be infinitely adjusted with an optional rotational speed control (98 008 68, not included).
  
• For a chimney outlet of: 100 mm to 200 mm
  
• Output pressure: max. approx. 50 Pa
  

• Like a MOK flue gas damper, but
  
• Tight metal seal (no minimum opening) for low-pressure flue gas systems
  
• For devices with no ignition flame and no accumulation of condensate
  

• For devices with a pilot light or solid fuels
  
• Also for oil and gas fan burners
  
• With minimal opening for low pressure flue gas systems
  

• for MOK
  
• With a limit switch (standard motor)
  
• Closed and currentless
  

made of stainless steel ...

• For repairing damaged, fire-proof brickwork, for renewing or servicing burner quarls or creating quoins
  
• Ready to use
  
• Chemical-ceramic setting
  

• For gluing plates, mats, moulded parts, strings
  
• Application temperature: max. 1400°C
  
• Contents: 80 ml

• Can be used everywhere that different materials, e.g. metal and stone meet, and issues arise due to heat expansion
  
• Mechanically fixed after setting
  
• Temperature-resistant: max. 1250°C
  

• Fire-Board, consists of biosoluble fibres, free from ceramic fibres
  
• Application temperature up to max. 1200°C
  
• Set consisting of:
  - 3 plates, dimensions: 500 x 400 x 6 mm
  - 3 plates, dimensions: 500 x 400 x 10 mm

• Automatic secondary air device according to DIN 4795
  
• Collar segments enable continuous adjustment to the flue tube-ø 110...200 mm
  
• Control range: 15 - 50 Pa
  

• Due to its elasticity, suitable as a seal set for: Flue gas flaps, burner doors
  
• Temperature resistant: max. 1200°C
  
• Easy to cut with Shears or Cutter
  

• Repair compound to repair wide cracks, spalling on fire-proof brickwork in stoves, masonry heaters and chimney inserts, heating boilers
  
• Hydraulic-setting
  
• Fire-proof
  

• Reliable and efficient extraction of flue gases and waste air
  
• Suitable for all fuels and heat generators in the flue gas system sector
  
• Resistant to many media thanks to high-quality stainless steel
  

• Fire-Board, consists of biosoluble fibres, free from ceramic fibres
  
• Application temperature up to max. 1200°C
  
• Dimensions: 500 x 400 x 6 mm

• Suitable for: Flue gas sound damper, T shape DN 130

• Suitable for: Exhaust silencer T-shape DN 130
  
• Scope of delivery:
  - Cover
  - Insulating disc
  - Viton seal sets

• Suitable for: particle separator Airjekt 1

• Electrostatic particle separator with electronic units, as a secondary measure to reduce fine dust content in the flue gas from almost all wood firing systems (e.g. stoves, pellet stoves, heating inserts, wood-fired boilers, manually or automatically fed up to 50 kW).
  With DIBt-approval.
  Technical data:
  
• Design for exhaust pipe ø (mm): 130-250
  
• Electronic unit dimensions (HxWxD mm): 75 x 210 x 155