Accessories for screw-in heaters

• Can be used in conjunction with ASKOHEAT+ 2.0 heating elements for storage tank installation
  
• To display stratification temperature behaviour in the Tanks
  
• Can be selected as a reference sensor for setpoint specifications such as: Legionella protection, minimum temperature, night-time utilisation
  

• Can be used in conjunction with ASKOHEAT+ 2.0 heating elements for installation in the ASKOWALL+ 2.0 hydraulic unit
  
• To display stratification temperature behaviour in the tanks
  
• Can be selected as a reference sensor for setpoint specifications such as: Legionella protection, minimum temperature, night-time electricity utilisation
  

• - For external connection to the heating buffer cylinder, completely pre-assembled
  - For storing PV energy as heat in heating water
  - For existing buffer storage tanks in which there is no heating element connection
  - Heating up the buffer cylinder using the instantaneous water heater principle
  - Full buffer cylinder volume can be utilised
  - For screw-in radiators DN 40 (1 1/2") up to installation length 750 mm
  - Temperature setting on the thermostatic mixing valve 50°C - 75°C
  - Integrated circulation pump and dirt trap
  - Connection for MAG
  - Supplied without screw-in heater
  Technical data:
  - Circulation pump: UPM3 Auto 15-70
  - Connection: DN 20 (3/4") IG
  - Connection for heating element: DN 40 (1 1/2")
  - Max. operating pressure: 3 bar
  - Operating temperature range: 10 to 90°C
  - Dimensions (H x W x D): 690 x 690 x 208 mm
  
• The remote control base is already fitted and equipped with pump relays.
  
• We recommend placing at least one PT1000 probe in the Tanks on site or using our ready-to-plug-in solution, the probe set 97 037 05
  

• Incl. Insulation
  
• Suitable screw-in heating elements: ASKOHEAT type AHIR-B-C from 2.0-9.0 kW (not included in the scope of delivery)
  
• For heating heating water for Solar or Heat pumps and for installation in Pipe systems
  

• Vertical installation position, installation direction from bottom to top, from ET to union nut
  
• Responds from a flow rate of approx. 0.8 l/min.
  
• Can be used up a flow rate of 70 l/min.
  

- For external connection to the heating buffer cylinder, completely pre-assembled- For storing PV energy as heat in heating water- For existing buffer storage tanks in which there is no heating element connection- Heating up the buffer cylinder using the instantaneous water heater principle- Full b ...

- For external connection to the heating buffer cylinder, completely pre-assembled- For storing PV energy as heat in heating water- For existing buffer storage tanks in which there is no heating element connection- Heating up the buffer cylinder using the instantaneous water heater principle- Full b ...

- For external connection to the heating buffer cylinder, completely pre-assembled- For storing PV energy as heat in heating water- For existing buffer storage tanks in which there is no heating element connection- Heating up the buffer cylinder using the instantaneous water heater principle- Full b ...

• Can be used in conjunction with ASKOHEAT+ heating elements and ASKOWALL+
  
• For visualising and optimising the self-produced electricity from a Photovoltaic system via the ASKOHOME+ APP
  
• Used to transmit energy and resource consumption
  

• For flexible connection of the ASKOWALL hydraulic unit to the Buffer tank
  
• Length of Hoses: 1600 mm
  
• Scope of delivery:
  - 2x OXYban flexible hose

• Vertical installation, installation direction from bottom to top, from the ball end to the union nut
  
• Responds from a flow rate of approx. 0.8 l/min
  
• Can be used up to a flow rate of 70 l/min