Tank anodes

• With threaded connection M8 x 30
  Ideal for customer service and maintenance, as different anodes no longer need to be stored. For all conventional process water tanks.
  Connection: M 8 x 30 mm
  The length of the anode can be shortened

• With screw-in sleeve, earth cable, insulation and fixing components

• PU: 5 units

• With pre-assembled DN 20 (3/4") screw-in socket and enclosed DN 25 (1"), DN 32 (1 1/4") and Accesories for flange mounting
  
• Fast, error-free installation thanks to the patented SmartConnect system with reverse polarity protection and integrated earth connection
  
• SmartConnect plugs can be adjusted 90° and rotated 360
  

• With screw-in sleeves DN 20 (3/4”), DN 25 (1”), DN 32 (11/4”)

• For restricted installation situations
  
• Screw-in thread
  Magnesium anodes, also referred to as sacrificial anode or protective anodes, reliably protect drinking water reservoirs from corrosion. This can be caused by imperfections in the enamel/coating, by installed parts and threaded connections. Thus buffer reservoirs in conjunction with untreated heating water can also be protected from corrosion.
  The lifespan of an anode can vary significantly. An annual inspection is recommended. The used of signal anodes or “insulated installation” simplifies the annual inspection considerably. Replacement is necessary when the anode is 2/3-diminished or the protective current is less than 0.3 mA.
  Anodes can be individually shortened!

• Standard
  
• Screw-in thread
  Magnesium anodes, also referred to as sacrificial anode or protective anodes, reliably protect drinking water reservoirs from corrosion. This can be caused by imperfections in the enamel/coating, by installed parts and threaded connections. Thus buffer reservoirs in conjunction with untreated heating water can also be protected from corrosion.
  The lifespan of an anode can vary significantly. An annual inspection is recommended. The used of signal anodes or “insulated installation” simplifies the annual inspection considerably. Replacement is necessary when the anode is 2/3-diminished or the protective current is less than 0.3 mA.
  Anodes can be individually shortened!

Delivery contents: Potentiostat, titanium anode, installation set, connection cable and installation/operation instructionsThe impressed current anode Correx was developed for the cathodic corrosion protection of storage tanks. In contrast to magnesium anode with restricted lifespan, the impressed c ...

• Delivery contents: Potentiostat, titanium anode, installation set, connection cable and installation/operation instructions
  The impressed current anode Correx was developed for the cathodic corrosion protection of storage tanks. In contrast to magnesium anode with restricted lifespan, the impressed current anode is maintenance-free. The intelligent electronic switch, which automatically, potentiostatically adjusts the requisite protective current to the actual protective current requirement of the storage tank, allows the use of the impressed current anode, regardless of the water quality. The impressed current anode set comprises a titanium electrode, which is installed in the storage tank and a potentiostat that is connected to the titanium electrode and storage tank with a connection cable.
  
• With IT DN 20 (3/4”) screw-in sleeve

• For insulated magnesium anode installation
  Contents:
  
• 5 x earth cable with 2 x FSH 6.3 x 0.8 mm plug
  
• 5 x earth cable with 1 x FSH 6.3 x 0.8 mm and 1 x M8 strand
  

• M8 x 4 with collar
  
• PU: 100 units

• PU: 100 units

• 23 x 22 mm
  
• PU: 20 units

• 20 x 8.7 x 2.8 mm
  
• PU: 100 units

• DN25 (1") x DN20 (3/4")
  
• With PTFE sealing ring

• For Insulated Magnesium anodes and Impressed current anodes
  
• Measuring functions:
  - Anode drive voltage (max. 20 VDC)
  - Mains voltage check (120 VAC-400 VAC)
  - Resistance check (max. 20 M-Ohm)
  - Insulation check (max. 2000 Ohm)
  - Diode functions
  - Protective current output (max. 200 mADC)
  - Temperature measurement (-20°C to +200°C)
  - Non-contact voltage test ("NCV" 230 VAC)
  
• Incl. test probes and test clamps
  

• Suitable for Vaillant: VEH 50/80/100/120/- 6 pro
  
• Ref. no.: 0020107795 replaces 28-5827
  
• Connection: DN 25 (1")
  

• Earth cable with insulation and fixing parts

• For magnesium and impressed current anodes
  
• Measurement functions:
  - Protection current (0-2200 mADC)
  - Drive voltage (0-20 VDC)
  - Alternating voltage (0-300 VAC)
  - Diodes continuity test (1 mA / 2.0 V)
  - Insulation test (0-2 kΩ)
  - Resistance measurement control sensor (0-20 kΩ)
  - Battery type 9 V
  
• Including connection cable with test probes