ITaca gas condensing boiler

• Suitable for evenes/fondital: ITACA, GIAVA, MADEIRA
  
• For converting from natural gas LL(G25) to natural gas E(G20)
  
• PU = 2 units

• With integrated changeover valve, for hot water preparation via an external hot water tank
  
• Compact, wall-mounted gas condensing boiler
  
• Control system with touch screen surface and external sensor in series
  

• As a pure heating device, for operation without hot water preparation
  
• Compact, wall-mounted gas condensing boiler
  
• Control system with touch screen surface and external sensor in series
  

• With integrated plate heat exchanger, for hot water preparation using the continuous flow principle
  
• Compact, wall-mounted gas condensing boiler
  
• Control system with touch screen surface and external sensor in series
  

• For room-temperature controlled operation
  
• The room temperature sensor is connected to the control system of the condensing boiler; the time program and the room temperature are set on the condensing boiler
  
• Installation location: Reference room (e.g. living room)
  

• Suitable for ITACA, GIAVA, MADEIRA
  
• For conversion from natural gas to liquid gas

• For connecting a flue gas system to a condensing boiler for operation that is dependent on ambient air

• For multiple assignment of several Itaca gas condensing boilers to one shared exhaust gas line
  Attention: Multiple assignment is only permitted after planning this with Weinmann & Schanz, and by installing this backflow safety device!!!

• For connecting a flue gas system to a condensing boiler
  
• For a separate supply air / exhaust system

• Wall-mounted gas-condensing boiler with integrated stainless steel hot water tank
  
• Control system with touch screen surface and external sensor in series
  
• With modulating premix gas burner
  

• The NOVACOND DM hydraulic group ensures efficient use of the system temperatures required. The return water from the direct radiator heating circuit and the hot water preparation is added to the feed of the mixed underfloor heating circuit. In this way the entire return to the condensing boiler cools down to the point that condensation (condensing effect) is guaranteed in the heat exchanger.
  Advantages:
  
• Low energy consumption by utilising the condensing effect
  
• Long service life of the Exhaust gas heat exchanger due to permanent condensation (self-cleaning effect)
  

• Suitable for Itaca KC/KB, ANTEA NEXT KC and FORMENTERA
  
• Corner design
  
• Scope of delivery:
  - 1 x Angle shut-off ball valve DN 15 (1/2") x DN 15 (1/2") ÜWM
  - 2 x copper elbow 18 mm x DN 20 (3/4") ÜWM
  - 1 x copper elbow 15 mm x DN 15 (1/2") ÜWM
  - 1 x Copper pipe 15 mm x DN 15 (1/2") ÜWM
  - 2 x transition 18 mm x DN 20 (3/4") AG
  - 2 x transition 15 mm x DN 15 (1/2") AG
  - 1 x drain valve DN 15 (1/2")
  - 1 x gas appliance shut-off ball valve angle with TAS, DN 15 (1/2")
  - 2 x Seal sets DN 20 (3/4")
  - 3 x Seal sets DN 15 (1/2")

• Gas condensing boiler ITACA model KRB 24
  
• Output 3.2 - 24.9 kW
  
• Integrated changeover valve, for hot water preparation via an external hot water tank
  

• Gas condensing boiler ITACA model KC 24
  
• Output 3.2 - 24.9 kW
  
• Integrated changeover valve, for hygienic hot water preparation using the instantaneous water heater principle
  

1. 1 x gas condensing boiler Itaca KRB 24 3.2-24.9 (90 865 85)2. 1 x flue gas boiler connecting piece 60/100 for operation independent of ambient air (90 865 88)3. 1 x magnetite separator Dirtmag DN25(1“) (90 874 99)4. 1 x hydraulic connection set KRB, straight design (90 866 08)5. 1 x expansion ...

1 x Gas condensing boiler ITACA 24 3.2-24.9 kW (90 035 18)1 x flue gas boiler connection piece 60/100 for room-sealed operation (90 865 88)1 x Magnetite separator evenes Maxi DN 25 (1") (90 032 99)1 x KRB hydraulic connection set, straight version for integral cylinder (90 872 12)1 x Zilflex H35L ex ...

• Suitable for Antea Next
  
• For extending a mixed heating circuit
  
• Max. 2 mixed heating circuits can be extended
  

• Suitable for Itaca and ANTEA NEXT
  
• Passageway version
  
• Scope of delivery:
  - 2 x DN 20 (3/4") shut-off ball valve
  - 2 x intermediate piece with drain DN 20 (3/4")
  - 1 x Pressure gauge
  - 1 x gas shut-off ball valve with TAS, DN 15 (1/2")
  - 4 x Seal sets DN 20 (3/4")

• Suitable for Itaca KRB
  
• Passageway version
  
• Scope of delivery:
  - 4 x shut-off ball valve DN 20 (3/4")
  - 4 x intermediate piece with drain DN 20 (3/4")
  - 1 x Pressure gauge
  - 1 x gas shut-off ball valve with TAS, DN 15 (1/2")
  - 8 x Seal sets DN 20 (3/4")

• Suitable for Itaca KRB in conjunction with TU-TWS integral cylinder
  
• Passageway version
  
• Scope of delivery:
  - 2 x shut-off ball valve DN 20 (3/4")
  - 4 x intermediate piece with drain DN 20 (3/4")
  - 1 x Pressure gauge
  - 1 x gas shut-off ball valve with TAS, DN 15 (1/2")
  - 6 x Seal sets DN 20 (3/4")
  - 4 x Reducing pieces DN 25 (1") x DN 20 (3/4")
  - 2 x corrugated hose DN 20 (3/4") x DN 25 (1") ÜWM insulated, length 500 mm

• Suitable for Itaca KC/KB, ANTEA NEXT and FORMENTERA
  
• Design: Passageway
  
• Scope of delivery:
  - 2x shut-off ball valve Heating DN 20 (3/4")
  - 2x shut-off ball valve Plumbing DN 15 (1/2")
  - 2x intermediate piece with drain DN 20 (3/4")
  - 1x Pressure gauge
  - 1x gas shut-off ball valve with TAS, DN 15 (1/2")
  - 6x Seal sets DN 20 (3/4") / 2x Seal sets DN 15 (1/2")
  - 2x Reducing pieces DN 20 (3/4") x DN 15 (1/2")

• Package consisting of:
  
• 1x Itaca KC 24 gas condensing combi boiler
  With integrated plate heat exchanger, for hot water preparation using the continuous flow principle
  
• Compact, wall-mounted gas condensing boiler
  

• Package consisting of:
  
• 1x Gas condensing boiler ITACA KRB 24
  With integrated changeover valve, for hot water preparation via an external hot water tank
  
• Compact, wall-mounted gas condensing boiler
  

• For connecting a flue gas system to the condensing boiler.
  
• For mounting directly on condensing boiler.

• Suitable for Itaca, GIAVA
  
• For extending a mixed heating circuit
  
• Max. 3 mixed heating circuits can be extended
  

• For conveniently operating the condensing boiler from the living room
  
• Room thermostat function
  
• Temperature display
  

• Suitable for evenes/fondital: MADEIRA SOLAR KRBS
  
• Scope of delivery:
  - 1 x circuit board
  - 1 x cable set
  - 3 x immersion sensor

• To cover hydraulic connects on ITACA KC combi device

• For connecting a flue gas system to the condensing boiler.
  
• Widened to 80/125 for mounting directly on condensing boiler.