Screw Sets

• A2 stainless steel: For indoor and outdoor applications with direct weathering
  
• Application: Outdoor wooden decking, 25-28 m2
  Contents:
  
• Cylinder head screws (T25): 850 pieces
  

• Content:
  
• 6 x 10 mm: 25 units
  
• 8 x 12 mm: 25 units
  

• Countersunk head: Screw connections of panels to beams, whenever flush countersinking of the head is required
  
• Full/partial thread: Absorption of high tensile forces, high contact pressure/reduced gap formation as the thread does not lock
  
• Electrogalvanised (WIROX®): For indoor/outdoor applications without direct weathering, 20 times higher corrosion protection than standard galvanising
  Contents
  Countersunk head screws:
  

• Anti-friction coated
  
• MULTI head, cuts in wood - brakes on metal
  
• 4CUT tip
  

• Countersunk head: Screw connections of panels to beams, whenever flush countersinking of the head is required
  
• Full/partial thread: Absorption of high tensile forces, high contact pressure/reduced gap formation as the thread does not lock
  
• Electrogalvanised (WIROX®): For indoor/outdoor applications without direct weathering, 20 times higher corrosion protection than standard galvanising
  Contents
  Countersunk head screws:
  

• Countersunk head: Screw connections of panels to beams, whenever flush countersinking of the head is required
  
• Partially threaded: Secure connection with reduced gap formation as the thread does not lock
  
• Electrogalvanised (WIROX®): For indoor/outdoor applications without direct weathering, 20 times higher corrosion protection than standard galvanising
  Contents
  Countersunk head screws:
  

• Contents:
  Countersunk head screws
  Electrogalvanised (WIROX®):
  
• 3.5 x 16 (T20) VG: 400 pieces
  
• 3.5 x 30 (T20) TG: 275 pieces
  

• Half-round head: Suitable for thin fittings with through hole, lies flat on the material
  
• Fully threaded: Screw connection of fittings with through hole, absorbs high tensile forces, high contact pressure
  
• Electrogalvanised (WIROX®): For indoor/outdoor applications without direct weathering, 20 times higher corrosion protection than standard galvanising
  

• Half-round head: Suitable for thin fittings with through hole, lies flat on the material
  
• Fully threaded: Screw connection of fittings with through hole, absorbs high tensile forces, high contact pressure
  
• Electrogalvanised (WIROX®): For indoor/outdoor applications without direct weathering, 20 times higher corrosion protection than standard galvanising
  Contents
  Half-round head screws:
  

• DIN 933
  
• DIN/EN ISO 4017
  
• Quality 8.8
  Contents:
  

• Application: Fastening Mirror Cabinets, curtain rails, wall shelves, substructures, etc.
  
• Area of application: plasterboard and gypsum fibreboard, hollow ceilings, wood wool lightweight panels, chipboard and plywood panels
  
• Electrogalvanised: For indoor and outdoor applications without direct weathering, not a substitute for stainless steel
  

• Countersunk head: Screw connections of panels to beams, whenever flush countersinking of the head is required
  
• Fully threaded (variable VG): Absorption of high tensile forces, high contact pressure, contraction function as with partial thread
  
• Partial thread: Secure connection with reduced gap formation as the thread does not lock
  

• Countersunk head: Screw connections of panels to beams, whenever flush countersinking of the head is required
  
• Fully threaded (variable VG): Absorption of high tensile forces, high contact pressure, contraction function as with partial thread
  
• Partial thread: Secure connection with reduced gap formation as the thread does not lock
  

• Increased thread pitch of the screw reduces the screw-in time
  
• Screw tip with three ribs ensures fast biting behaviour and pre-milling
  
• Shank milling ribs in combination with the core cutter geometry reduce the screw-in resistance
  

• Increased thread pitch of the screw reduces the screwing-in time
  
• Screw tip with three ribs provides quick bite and pre-cutting
  
• Shaft milling ribs combined with the core cutter geometry reduce the screw-in resistance
  

• Countersunk head: Screw connections of panels to beams, whenever flush countersinking of the head is required
  
• Fully threaded: Screw connection of fittings with through hole, absorption of high tensile forces, high contact pressure
  
• Electrogalvanised: For indoor and outdoor applications without direct weathering, but no substitute for stainless steel
  Contents
  Countersunk head screws Power-Fast II:
  

• Countersunk head: Screw connections of panels to beams, whenever flush countersinking of the head is required
  
• Fully threaded: Screw connection of fittings with through hole, absorption of high tensile forces, high contact pressure
  
• Partial thread: Secure connection with reduced gap formation as the thread does not lock
  

• Drive: T20
  
• Countersunk head: Screw connections of panels to beams, whenever flush countersinking of the head is required
  
• Partial thread: Secure connection with reduced gap formation as the thread does not lock
  

• Drive: T20
  
• Half-round head: Suitable for thin fittings with through hole, lies flat on the material
  
• Fully threaded: Screw connection of fittings with through hole, absorption of high tensile forces, high contact pressure
  

• Drive: T20
  
• Countersunk head: Screw connections of panels to beams, whenever flush countersinking of the head is required
  
• Fully threaded: Screw connection of fittings with through hole, absorption of high tensile forces or high contact pressure
  

• Package consisting of:
  Plate head screws, galvanised (WIROX®): 250 pieces
  
• Fully threaded
  
• Hardened, anti-friction coated
  

• Package consisting of:
  Plate head screws, galvanised (WIROX®): 250 pieces
  
• Fully threaded
  
• Hardened, anti-friction coated
  

• Contents:
  DIN/EN ISO 1207 galvanised threaded screws:
  
• 3 x 10 mm: 60 pieces
  
• 3 x 16 mm: 50 pieces
  

• Countersunk head: Screw connections of panels to beams, whenever flush countersinking of the head is required
  
• Full/partial thread: Absorption of high tensile forces, high contact pressure/reduced gap formation as the thread does not lock
  
• Electrogalvanised (WIROX®): For indoor and outdoor applications without direct weathering, 20 times higher corrosion protection than standard galvanising, but no substitute for stainless steel
  Contents
  Countersunk head screws:
  

• YELLOX
  Contents:
  
• 2.5 x 20 (PZ1): 400 units
  
• 2.5 x 25 (PZ1): 400 units
  

• Contents:
  All-purpose dowel TRI:
  
• 5 x 31 mm: 20 pieces
  
• 6 x 36 mm: 46 pieces
  

• Countersunk head screws with T-drive, partially threaded
  
• 2-fold split expansion body with 4 fins and flexible dowel neck
  
• Several active anti-rotation locks
  

• Countersunk head screws, partially threaded
  Contents:
  All-purpose dowel TRI:
  
• 5 x 31 mm: 24 pieces
  
• 6 x 36 mm: 24 pieces
  

• Thread ø d1: 5.0 mm
  
• Length: 60 mm
  
• Blade size: T20
  

• Drive: TX
  
• Countersunk head: Screw connections of panels to beams, whenever flush countersinking of the head is required
  
• Full/partial thread: Absorption of high tensile forces, high contact pressure/reduced gap formation as the thread does not lock
  

- Galvanised, blue passivated: For indoor and outdoor applications without direct weathering, but no substitute for stainless steel- With ETA approvalContent:- 3.0 x 20 (T10): 500 pieces- 3.0 x 30 (T10): 300 pieces- 3.5 x 40 (T10): 130 pieces- 4.0 x 45 (T20): 90 pieces- 4.5 x 60 (T20): 70 pieces- 5. ...

- Galvanised, blue passivated: For indoor and outdoor applications without direct weathering, but no substitute for stainless steel- With ETA approval- Content:- 3.0 x 20 (T10): 600 pieces- 3.5 x 25 (T20): 400 pieces- 3.5 x 30 (T20): 400 pieces- 4.0 x 30 (T20): 400 pieces- 4.0 x 35 (T20): 200 pieces ...

- Galvanised, blue passivated: For indoor and outdoor applications without direct weathering, but no substitute for stainless steel- With ETA approvalContent:- 5.0 x 35, VG (T20): 1500 pieces- 5.0 x 40, VG (T20): 800 pieces- 4.5 x 50, TG (T20): 400 pieces- 4.5 x 60, TG (T20): 400 pieces- 4.5 x 70, T ...

• 700-piece
  consisting of:
  
• WS i-BOXX® 72 + inset boxes
  
• 100 x hanger bolt M 8 x 60 mm
  

• DIN 912
  
• Quality 8.8
  
• Galvanised
  Contents:
  

• Galvanised, blue passivated: For indoor and outdoor applications without direct weathering, but no substitute for stainless steel
  
• MagicClose: Patented full thread pulls wooden components together without pretensioning and without gaps. (up to screw diameter 6 mm)
  
• GripFit: Heco-Drive allows one-handed working. Also holds stainless steel screws securely on the Bits. (from screw diameter 3.5 mm)