Sealing sleeves
New
Multiple variants
Roof-mounted pipe penetration for solar pipes, double penetration
Immediately available
- Self-adhesive sleeve with weather-resistant surface for rainproof routing of pipes for solar thermal and photovoltaic systems.
- Self-adhesive butyl backing
- Permanently UV-stable
New
Multiple variants
Roof-mounted pipe penetration for solar pipes, single penetration
Immediately available
- Self-adhesive sleeve with weather-resistant surface for rainproof routing of pipes for solar thermal and photovoltaic systems.
- Self-adhesive butyl backing
- Permanently UV-stable
Multiple variants
FlachdachDicht air sealing sleeves with aluminium/butyl adhesive collar
Immediately available
- For air-tight penetrations of the vapour barrier in flat roof construction
- Airtight according to DIN 4108 Teil 7 and EnEV 2014
- Protects against structural damage that can result from uncontrolled air exchange
Multiple variants
DachDicht Plus air sealing sleeves with HT safe moulding with aluminium/butyl adhesive collar and reducer
Immediately available
- For airtight penetrations of underlays and roofing membranes for roof pitches up to 45°
- Airtight according to DIN 4108 Teil 7 and EnEV 2014
- Protects against structural damage that can result from uncontrolled air exchange
Multiple variants
Cuff Dektite
Immediately available
- For sealing pipe penetrations through facades and roofs
- Insensitive to UV radiation
- Adaptable to all profile shapes due to embedded aluminium frame
Multiple variants
Sealing collar On-roof sealing anthracite
Immediately available
- For direct sealing at the water-bearing roof level of openings, e.g. solar systems, antenna masts, equipment holders and hanger bolts
- Surface made of crimped aluminium for easy moulding to the tile surface
- Self-adhesive collar with butyl adhesive
Multiple variants
Sealing collar AufdachDICHT tile red
Immediately available
- For direct sealing at the water-bearing roof level of openings, e.g. solar systems, antenna masts, equipment holders and hanger bolts
- Surface made of crimped aluminium for easy moulding to the tile surface
- Self-adhesive collar with butyl adhesive
Multiple variants
Bulkhead screw connection without vapour barrier foil
Only a few items left in stock
- For retrofitting HT pipes through vapour barriers, walls or panels in existing structures
- Without insertion limitation
- Circular cutter required for installation
Multiple variants
HT bulkhead fitting with vapour barrier foil
Only a few items left in stock
- For retrofitting HT pipes through vapour barriers, walls or panels in existing buildings
- Including vapour barrier foil 280 x 280mm
- Without insertion limitation
Multiple variants
Air seal sleeves with Tyvek® adhesive collars
Immediately available
- Via the air sealing levels from e.g. HT pipes, ventilation pipes, flue gas pipes etc.
- Suitable substrates: Vapour barriers and brakes, sarking membranes, room laying membranes, wind sealing membranes, façade membranes
- Highly-elastic EPDM sleeve
Multiple variants
Air seal sleeves with aluminium butyl adhesive collars
Immediately available
- Permanent airtightness of all penetrations
- Fast, simple processing
- Flexible grommet compensates for on-site movements
Multiple variants
Air seal sleeves with fleece butyl adhesive collars
Immediately available
- Permanent airtightness of all penetrations
- Fast, simple processing
- Flexible grommet compensates for on-site movements
93 163 35
Heat-shrink tubing open mould, shrink range 100-30mm, L=200mm, UV resistant
Immediately available
- Open design, closable with stainless steel clip for using a subsequent assembly
- Shrink range min.: 30 mm
- Shrink range max.: 100 mm
Multiple variants
Pipe sleeve HOTSchott
Immediately available
- For penetrations such as Solar and exhaust gas pipes with temperatures up to +250 °C
- Guaranteed airtight in accordance with DIN4108 Part 7 and EnEV 2014
- Quick and easy to apply
Multiple variants
Pipe sleeve HOTSchott
Immediately available
- For penetrations such as Solar and exhaust gas pipes with temperatures up to +250 °C
- Guaranteed airtight in accordance with DIN4108 Part 7 and EnEV 2014
- Quick and easy to apply
Multiple variants
Multiple feed-throughs M-Tec6
Immediately available
- For sealing up to 6 cable or pipe penetrations. Application e.g. cable bundles, satellite cables, duct bundles
- All penetrations are permanently air-tight
- Quick, easy processing
Multiple variants
Multiple feed-throughs M-Tec6
Immediately available
- For sealing up to 6 cable or pipe penetrations. Application e.g. cable bundles, satellite cables, duct bundles
- All penetrations are permanently air-tight
- Quick, easy processing
Multiple variants
Airtight plugs
Immediately available
- For smoke and air-tight duct sealing
- For empty pipe installation with an air-tight design
- In fire protection areas against smoke transfer
97 000 43
Cable/pipe sleeve M-Tec6 K 6 x 4 - 11 mm, Tyvek adhesive collar
Immediately available
- For sealing up to 6 cable or pipe penetrations. Application e.g. cable bundles, satellite cables, duct bundles
- All penetrations are permanently air-tight
- Quick, easy processing
97 000 44
Cable/pipe sleeve M-Tec6 K 6 x 16 - 25 mm Tyvek adhesive collar
Immediately available
- For sealing up to 6 cable or pipe penetrations. Application e.g. cable bundles, satellite cables, duct bundles
- All penetrations are permanently air-tight
- Quick, easy processing
97 000 45
Cable/pipe sleeve M-Tec6 K 6 x 4 - 11 mm Aluminium butyl adhesive collar
Immediately available
- For sealing up to 6 cable or pipe penetrations. Application e.g. cable bundles, satellite cables, duct bundles
- All penetrations are permanently air-tight
- Quick, easy processing
97 000 46
Cable/pipe sleeve M-Tec6 K 6 x 16 - 25 mm Aluminium butyl adhesive collar
Immediately available
- For sealing up to 6 cable or pipe penetrations. Application e.g. cable bundles, satellite cables, duct bundles
- All penetrations are permanently air-tight
- Quick, easy processing
97 015 00
Uni Primer 125 ml container Accessories for butyl sleeves
Immediately available
- Synthetic resin undercoat containing solvents that is used to prepare the substrate and optimise cold adhesive tape adhesion
- Can be used on all absorbent and mineral substrates such as concrete, brick, wood etc.
- The substrate must be level, fixed, dry, oil, grease and dust-free
97 032 62
AufdachDICHT, GD22 brick red, 25-32mm
Immediately available
- For direct sealing at the water-bearing roof level of openings, e.g. solar systems, antenna masts, equipment holders and hanger bolts
- Surface made of crimped aluminium for easy moulding to the tile surface
- Self-adhesive collar with butyl adhesive
97 032 76
Reduction DN125/110, DachDICHT PLUS 114mm
Immediately available
- For airtight penetrations of underlays and roofing membranes for roof pitches up to 45°
- Airtight according to DIN 4108 Teil 7 and EnEV 2014
- Protects against structural damage that can result from uncontrolled air exchange
97 032 77
Reduction DN160/110, DachDICHT PLUS 175mm
Immediately available
- For airtight penetrations of underlays and roofing membranes for roof pitches up to 45°
- Airtight according to DIN 4108 Teil 7 and EnEV 2014
- Protects against structural damage that can result from uncontrolled air exchange
97 032 78
Reduction DN160/125, DachDICHT PLUS 175mm
Immediately available
- For airtight penetrations of underlays and roofing membranes for roof pitches up to 45°
- Airtight according to DIN 4108 Teil 7 and EnEV 2014
- Protects against structural damage that can result from uncontrolled air exchange
97 032 93
Pipe sleeve Alu-Butyl FlachdachDICHT RGD50 50-72mm
Immediately available
- For air-tight penetrations of the vapour barrier in flat roof construction
- Airtight according to DIN 4108 Teil 7 and EnEV 2014
- Protects against structural damage that can result from uncontrolled air exchange
97 032 94
Pipe sleeve Alu-Butyl FlachdachDICHT RGD75 72-90mm
Currently not in stock - Time of delivery: approx. 3-5 weeks
- For air-tight penetrations of the vapour barrier in flat roof construction
- Airtight according to DIN 4108 Teil 7 and EnEV 2014
- Protects against structural damage that can result from uncontrolled air exchange
97 032 95
Pipe sleeve Alu-Butyl FlachdachDICHT RGD90 90-100mm
Currently not in stock - Time of delivery: approx. 3-5 weeks
- For air-tight penetrations of the vapour barrier in flat roof construction
- Airtight according to DIN 4108 Teil 7 and EnEV 2014
- Protects against structural damage that can result from uncontrolled air exchange
97 032 96
Pipe sleeve Alu-Butyl FlachdachDICHT RGD100 100-110mm
Currently not in stock - Time of delivery: approx. 1-2 weeks
- For air-tight penetrations of the vapour barrier in flat roof construction
- Airtight according to DIN 4108 Teil 7 and EnEV 2014
- Protects against structural damage that can result from uncontrolled air exchange
97 032 97
Pipe sleeve Alu-Butyl FlachdachDICHT RGD125 125-135mm
Immediately available
- For air-tight penetrations of the vapour barrier in flat roof construction
- Airtight according to DIN 4108 Teil 7 and EnEV 2014
- Protects against structural damage that can result from uncontrolled air exchange