Seals, O-rings

• Delivery contents per set:
  
• Hexagon bolts, quality 8.8, galvanized
  
• 2x hardened washer for each screw
  

• Thickness: 2 mm
  
• Suitable for flat-sealing pipe fittings
  
• Tested according to DVGW worksheet W 270
  

• PU = 25 units

• Replacement seal for flat-sealing stainless steel V4A screw connections
  
• Material: Teflon (PTFE)

• For gas shut-off valves DN 20 (3/4”) to DN 32 (1 1/4”)

Accessories for heating circulation pumps ...

• Suitable for seal range order no. 91 001 55
  
• Approvals: DVGW, HTB and KTW

• Suitable for seal range order no. 91 002 73
  
• Approvals: gas DVGW

Accessories for solar flexible pipe ...

• Silicone grease
  
• Resistant to hot and cold water
  
• Strong adhesion and sealing
  

• For Euro-WC with connection ø 55 mm
  
• Built 1978 onwards
  
• Colour white

• For WC with connection ø 48 mm
  
• Built prior to 1978
  
• Colour white

• Straight design
  
• For WC with connection ø 48 mm
  
• Colour white

• For pressurised flush pipes ø 18 mm
  
• For Urinals connection ø 35 mm
  
• Colour white

• Colour black

• For transition seal cast iron pipe / HT pipes

• For transition seal cast iron pipe / HT pipes
  
• Colour black

Transition rings on plastic pipes, colour black. ...

• The geometry of the seal provides an abutment to the end face of the socket. Now the spigot with the "SE seal" is pushed into the socket. The two abutments ensure that the "SE seal" is correctly seated and locked after half a turn. Colour black.
  
• Design stoneware on cast iron pipe

• The geometry of the seal provides an abutment to the end face of the socket. Now the spigot with the "SE seal" is pushed into the socket. The two abutments ensure that the "SE seal" is correctly seated and locked after half a turn. Colour black.
  
• Casting on stoneware socket

The contents comprise: ...

The contents comprise: ...

The contents comprise: ...

• Thickness: 2 mm
  
• Suitable for gas, oil and petrol
  
• Temperature resistance of Seal sets: up to approx. +120°C
  

• Thickness: 2 mm
  
• Suitable for gas, oil and petrol
  
• Temperature resistance of Seal sets: up to approx. +120°C
  

• Thickness: 1.8 mm
  
• Suitable for drinking water, gas, oil and petrol
  
  
• Colour: yellow

• Thickness: 1.8 mm
  
• Suitable for drinking water, gas, oil and petrol
  
  
• Colour: yellow

• Temperature resistant: up to approx. +250°C
  
• Thickness: 2 mm
  
• Enormous adaptability
  

• Temperature resistant: up to approx. +250°C
  
• Thickness: 2 mm
  
• Enormous adaptability
  

• Temperature resistant: up to approx. +250°C
  
• Thickness: 2 mm
  
• Enormous adaptability