Pressure-resistant instantaneous water heater
- For one or more tapping points
- Electronically controlled
- One-button control panel for quick and easy temperature selection
- In three stages: 35°C, 45°C and 55°C
- For one or more tapping points
- Electronically controlled basic instantaneous water heater without controls
- Particularly low switch-on water volume from 1.5 l/min
- For one or two tapping points
- Electronic controlled instantaneous water heater
- Sensor key control panel with LED display for temperature input accurate to the degree between 20°C and 60°C
- For one or more tapping points
- Electronically controlled
- Air bubble detection
- Fully electronically controlled
- For over-counter and under-counter installation
- Simple operation thanks to large, illuminated multifunctional display
- Greater ease of use for under-sink installation, as the appliance cap and control unit can be rotated
- The temperature can be permanently limited internally by the installer to 55, 50 or 43 °C
- Consumption display
- Quick temperature selection using two memory buttons
- Suitable for reheating preheated water
- Selectable appliance output - 18/21/24 kW in one appliance (not DHE 27)
- Comfort remote control is available as an accessory
Technical data:
| Type | DHE 18/21/24 | DHE 27 |
| Energy efficiency class | A | A |
| Voltage [V] | 400 | 400 |
| Nominal power [kW] | 18 / 21 / 24 | 27 |
| Type of protection | IP25 | IP25 |
| Temperature selection range [°C] | 20 - 60 | 20 - 60 |
| Water connections (screw connections) | DN 15 (1/2") AG | DN 15 (1/2") AG |
| Hot water output at Δt = 28 K [l/min] | 9.2 / 10.7 / 12.3 | 13.8 |
| Dimensions (W x H x D) [mm] | 225 x 466 x 116 | 225 x 466 x 116 |
- Electronically controlled
- Over- and under-counter installation possible with one device
- Can be operated with pressure-resistant or depressurised fittings
- Child safety lock and scalding protection thanks to permanently adjustable internal temperature
- Integrated flow rate regulator
Technical data:
| Type | DEM 3 | DEM 4 | DEM 6 | DEM 7 |
| Energy efficiency class | A | A | A | A |
| Voltage [V AC] | 230 | 230 | 230 | 400 |
| Nominal power [kW] | 3.53 | 4.4 | 5.7 | 6.5 |
| Humidity level according to VDE | IP25 | IP25 | IP25 | IP25 |
| Temperature selection range [°C] | 30 - 50 | 30 - 50 | 30 - 50 | 30 - 50 |
| Water connections (screw connections) | DN 10 (3/8") AG | DN 10 (3/8") AG | DN 10 (3/8") AG | DN 10 (3/8") AG |
| Hot water output at Δt = 25 K [l/min] | 2.0 | 2.5 | 3.2 | 3.7 |
| Dimensions (W x H x D) [mm] | 190 x 143 x 82 | 190 x 143 x 82 | 190 x 143 x 82 | 190 x 143 x 82 |
- Hydraulically controlled
- Over- and under-counter installation possible with one device
- Operation with depressurised fitting
- Integrated flow rate regulator
Technical data:
| Type | DNM 3 | DNM 4 | DNM 6 |
| Energy efficiency class | A | A | A |
| Voltage [V AC] | 230 | 230 | 230 |
| Nominal power [kW] | 3.53 | 4.4 | 5.7 |
| Humidity level according to VDE | IP25 | IP25 | IP25 |
| Water connections (screw connections) | DN 10 (3/8") AG | DN 10 (3/8") AG | DN 10 (3/8") AG |
| Hot water output at Δt = 25 K [l/min] | 2.0 | 2.5 | 3.2 |
| Dimensions (W x H x D) [mm] | 190 x 143 x 82 | 190 x 143 x 82 | 190 x 143 x 82 |
- Electronically controlled
- For over-counter and under-counter installation
- Illuminated multifunctional display
- Greater operating convenience for under-sink installation, as the appliance cap and control unit can be rotated
- The temperature can be permanently limited internally by the installer to 55, 50 or 43 °C
- Quick temperature selection thanks to two memory buttons
- Suitable for preheated water up to 55°C for reheating
- Selectable appliance output - 18/21/24 kW in one appliance (not DEL 27 plus)
- Comfort remote control is available as an accessory
Technical data:
| Type | DEL 18/21/24 Plus | DEL 27 Plus |
Energy efficiency class | A | A |
Voltage [V] | 400 | 400 |
Nominal power [kW] | 18 / 21 / 24 | 27 |
Type of protection | IP25 | IP25 |
Temperature selection range [°C] | 20 - 60 | 20 - 60 |
Water connections (screw connections) | DN 15 (1/2") AG | DN 15 (1/2") AG |
Hot water output at Δt = 28 K [l/min] | 9.2 / 10.7 / 12.3 | 13.8 |
Dimensions (W x H x D) [mm] | 225 x 466 x 116 | 225 x 466 x 116 |
- Hydraulically controlled
- Under-sink mounting
- Operation with pressure-resistant or depressurised fittings possible
- Integrated flow rate regulator
Technical data:
| Type | DHM 3 | DHM 4 | DHM 6 | DHM 7 |
| Energy efficiency class | A | A | A | A |
| Voltage [V AC] | 230 | 230 | 230 | 400 |
| Nominal power [kW] | 3.53 | 4.4 | 5.7 | 6.5 |
| Humidity level according to VDE | IP25 | IP25 | IP25 | IP25 |
| Water connections (screw connections) | DN 10 (3/8") AG | DN 10 (3/8") AG | DN 10 (3/8") AG | DN 10 (3/8") AG |
| Hot water output at Δt = 25 K [l/min] | 2.0 | 2.5 | 3.2 | 3.7 |
| Dimensions (W x H x D) [mm] | 190 x 143 x 82 | 190 x 143 x 82 | 190 x 143 x 82 | 190 x 143 x 82 |
- Electronically controlled
- For over-counter and under-counter installation
- Temperature setting via rotary selector
- Temperature indication on LC display
- Greater ease of use for under-sink installation, as the appliance cap and control unit can be rotated
- Suitable for preheated water up to 55°C for reheating
- Comfort remote control is available as an accessory
Technical data:
| Type | DHB-E 11/13 LCD | DHB-E 18 LCD | DHB-E 18/21/24 LCD | DHB-E 27 LCD |
Energy efficiency class | A | A | A | A |
Voltage [V] | 400 | 400 | 400 | 400 |
Nominal power [kW] | 11 / 13.5 | 18 | 18 / 21 / 24 | 27 |
| Protection class | IP25 | IP25 | IP25 | IP25 |
Temperature selection range [°C] | 20 - 60 | 20 - 60 | 20 - 60 | 20 - 60 |
Water connections (screw connections) | DN 15 (1/2") AG | DN 15 (1/2") AG | DN 15 (1/2") AG | DN 15 (1/2") AG |
Hot water output at Δt = 28 K [l/min] | 5.6 / 6.9 | 9.2 | 9.2 / 10.7 / 12.3 | 13.8 |
Dimensions (W x H x D) [mm] | 225 x 466 x 116 | 225 x 466 x 116 | 225 x 466 x 116 | 225 x 466 x 116 |
- Electronically controlled
- Particularly flat design
- Infinitely variable temperature setting via rotary selector
- Suitable for preheated water from solar and heat pump systems
- Selectable connected load 11 or 13.5 kW
- Incl. mains connection cable
Technical data:
| Type | DCE 11/13 | DCE 11/13 H |
| Energy efficiency class | A | A |
| Voltage [V] | 400 | 400 |
| Nominal power [kW] | 11.2 / 13.5 | 11.2 / 13.5 |
| Protection class | IP24 | IP24 |
| Temperature selection range [°C] | 20 - 60 | 20 - 60 |
| Water connections (screw connections) | DN 10 (3/8") AG | DN 15 (1/2") AG |
| Hot water output | 3.7 / 4.5 | 3.7 / 4.5 |
| Dimensions (W x H x D) [mm] | 188 x 293 x 85 | 188 x 293 x 85 |
- For one tapping point
- Electronically controlled
- Under-sink installation
- For one or more tapping points
- Electronic control
- Precise temperatures at all times thanks to TWIN TEMPERATURE Control TTC and dynamic flow control
- Connections: DN 10 (3/8")
- Variable installation as top or under-sink device
- Only for one tapping point
- For one or more tapping points
- Electronic instantaneous water heater with good temperature comfort
- Largely constant outflow temperatures in the event of pressure fluctuations or supply temperature fluctuations
- - Only for one draw-off point
- Electronically controlled small instantaneous water heater
- Saves up to 85% energy compared to conventional small storage heaters
- Solar system compatible
- Sensor button and three differently coloured LEDs for determining the maximum outlet temperature in three stages ECO (35°C), Comfort (+38°C) and Max (+45°C)
- Pressure-resistant design
- Effective bare wire heating system IES
- Mains connection cable approx. 650 mm long, ready to plug in (3.5 kW) or mains cable (from 4.4 kW)
- Maintenance-friendly heating cartridge
- Suitable for reheating pre-heated water (e.g. solar system)
- Energy efficiency class A
Area of application
With standard plumbing fittings for hand basins, also suitable: - For non-contact fittings
- For stand valves (no mixing of hot and cold water required)
- Only for one tapping point
- Hydraulically controlled small instantaneous water heater
- Pressure-resistant design
- For one or more tapping points
- Electronic instantaneous water heater with good temperature comfort
- Largely constant outflow temperatures in the event of pressure fluctuations or supply temperature fluctuations
- For one or more tapping points
- Electronic instantaneous water heater with good temperature comfort
- Largely constant outflow temperatures in the event of pressure fluctuations or supply temperature fluctuations
- For one or more tapping points
- Suitable for solar systems up to a max. inlet temperature of 60°C
- Electronically controlled
- For one or more tapping points
- Full electronic control
- Precise temperatures at all times thanks to TWIN TEMPERATURE Control TTC and dynamic flow control
- 5 x Evenes small instantaneous water heater
- Variable mounting as counter-top or under-sink unit
- Only for one tapping point
consisting of:1 x small instantaneous water heater EPO2-3, pressure-resistant, 3.5 kW, 230 volts, EEC: A1 x Grohe Eurosmart washbasin mixer1 x installation kit ...
- For one or two tapping points
- Electronically controlled undersink instantaneous water heater without control element
- Maximum outlet temperature factory-set to 50°C
- For one or two tapping points
- Electronically controlled undersink instantaneous water heater
- Sensor key control panel with LED display for temperature input accurate to the degree between 20°C and 60°C
- Electronically controlled
- For one or more tapping points
- Suitable for solar systems up to an inlet temperature of max. 60°C
- Electronically controlled
- For one or more tapping points
- Suitable for solar systems up to an inlet temperature of max. 60°C
- Electronically controlled
- For one or more tapping points
- Suitable for solar systems up to an inlet temperature of max. 60°C