Bottle systems and Accesories

31 / 31

Multiple variants

GOK cylinder system with OPSO/UPSO, type MUV, with manual changeover unit

Currently not in stock

For connection to gas cylinders with a filling weight of 33 kg, for pressure regulation to the nominal pressure of the gas appliance
Also suitable for commercial use
Cylinders can be changed without interrupting operation

Multiple variants

GOK cylinder system with OPSO/UPSO, type AUV, with automatic switchover device

Immediately available

For connection to gas cylinders with a filling weight of 33 kg, for pressure regulation to the nominal pressure of the gas appliance
Also suitable for commercial use
Cylinders can be changed without interrupting operation

Multiple variants

Hose cable for multi-bottle systems

Immediately available

High-pressure PS 30, DIN-DVGW-tested
Hose lines are equipped with a clip (except KLF)
Connections:
On one side, large-bottle (GF), small-bottle (KLF) connection or combi (union nut), on the other large-bottle (GF) external thread or RST

Multiple variants

Cylinder systems with OPSO, type MUV, with manual Changeover valves

Immediately available

For connection to gas cylinders with a filling weight of 33 kg, for pressure regulation to the nominal pressure of the gas appliance
Conformity:
- Individual fittings with DIN-DVGW or DVGW type examination certificate or EU type examination certificate GGV
Note:
The dimensioning and design of the LPG system (selection of gas flow monitor, nominal flow rate, nominal diameter, etc.) must be carried out in accordance with TRF.
Technical data:
Max. inlet pressure: 16 bar

Multiple variants

Cylinder system with OPSO, with automatic switchover device

Immediately available

For connection to gas cylinders with a filling weight of 33 kg, for pressure regulation to the nominal pressure of the gas appliance
Conformity:
- Individual fittings with DIN-DVGW or DVGW type examination certificate or EU type examination certificate GGV
Note:
The dimensioning and design of the LPG system (selection of gas flow monitor, nominal flow rate, nominal diameter, etc.) must be carried out in accordance with TRF.
Technical data:
Max. inlet pressure: 16 bar

Multiple variants

Low-pressure controller model EN61-DS PS 16 bar

Immediately available

Overpressure safety device S2SR for protecting the consuming devices from impermissibly high pressure
Viewing display (green/red) with visual signal (red) in the event of output pressures over 80 mbar
Thermal shut-off device for automatic shut-off of the gas flow in the event of a rise in temperature to over 100°C

58 000 04

Changeover valves Automatic type AUV 12kg/h 1.5 bar GFxAG GFxGF

Immediately available

Output: 12 kg/h
Input pressure: max. 16 bar
With control knob

58 000 15

Stove connection set Pro 1.5 kg/h 50 mbar, for domestic appliances

Immediately available

For connection to gas cylinders, for pressure regulation based on nominal pressure of the gas appliance
For connecting a household appliance, e.g. stove to the gas cylinder
According to TRF, gas appliances with a stainless steel corrugated hose line up to 2000 mm in length may be connected directly to the pressure regulator
Stainless steel corrugated hose lines do not need to be replaced recurrently as they are not subject to ageing

58 000 16

Stainless steel corrugated hose line type MWS, G1/4"LH-ÜWM x IT Rp1/2", length 1000 mm

Immediately available

For the stress-free connection of fittings to consumer appliances or pipelines
Maximum permissible pressure: PS 1 bar
DN 8 (1/4") LH union nut x IG RP DN 15 (1/2")

58 000 21

Single cylinder system for small cylinders, type EN61-DS, KLF x G1/4" LH-ÜWM, 50 mbar, 1.5 kg/h

Only a few items left in stock

For connection to gas cylinders, for pressure regulation based on nominal pressure of the gas appliance
- Set for the connection of a mobile interior heating device
Consisting of:
- Low pressure controller type EN61-DS 1.5 kg/h 50 mbar
- Medium pressure hose line KLF x G DN8 (¼“) LH-union nut 400 mm
- MiniTool (53 001 71)
Conformity:
- Individual fittings DIN-DVGW or DVGW tested, EC type examination

58 001 10

Liquid gas bottle low pressure control KLF R1/4" 1,5kg/h 50mbar up to 11 kg/h

Immediately available

For bottle systems with thermal shut-off device and control manometer, fixed
With control manometer for testing bottle connection and pipe system tightness
Thermal shut-off device for automatic shut-off of the gas flow in the event of a rise in temperature to over 100°C, back pressure safe to 16 bar

58 001 28

High pressure G hose small bottle connection 300 mm

Immediately available

High-pressure PS 30, DIN-DVGW-tested
Hose lines are equipped with a clip (except KLF)
Connections:
On one side, large-bottle (GF), small-bottle (KLF) connection or combi (union nut), on the other large-bottle (GF) external thread or RST

58 001 44

Emergency supply fitting combination A x3/8”lft.x 2000mm

Currently not in stock

Connection directly to the pre-stage regulator for emergency supply of the liquid gas tank system from a gas cylinder
Feed directly into the pre-stage regulator with emergency supply connection DN 10 (3/8") left union nut
Consisting of:
- Hose breakage protection Komb.-A x DN 10 (3/8") left AG
- Connecting hose on both sides DN 10 (3/8") left union nut x 2000 mm long,

58 001 61

Low pressure regulator with overpressure. Combi x 1/4``LH, PN 16

Immediately available

With integrated overpressure safety device (OSD) for protection
Viewing display (green/red) with visual signal (red) in the event of output pressures over 80 mbar
PS 16
Connections:

58 001 83

Tee for multi-bottle plants

Immediately available

For multi-bottle systems
Large bottle ET x combination union nut x large bottle ET

58 001 84

Connection hose PB 30 - 400mm

Immediately available

For multi-bottle systems
2 x combi union nuts
Length: 400mm

58 001 85

Large bottle hose PB 30 x LB X RST 12 mm X 400 mm

Immediately available

High-pressure PS 30, DIN-DVGW-tested
Hose lines are equipped with a clip (except KLF)
Connections:
On one side, large-bottle (GF), small-bottle (KLF) connection or combi (union nut), on the other large-bottle (GF) external thread or RST

58 002 03

Cooker connection set Basic, 1.5kg/h, 50mbar, for domestic systems

Immediately available

For connection to gas cylinders, for pressure regulation to the nominal pressure of the gas appliance
Consisting of:
- Low pressure regulator type EN61-DS with overpressure safety device S2SR (ÜDS)
- Visual indicator
- Thermal Isolating fittings "T" (TAE)
- Pressure gauge
- Medium-pressure hose (rubber with textile inlay, cold-resistant to -30°C, hose dimensions 6.3 x 3.5 mm) DN 8 (1/4") LH-ÜM x RVS 8 x 400 mm
- Connecting pipe and Angle screw-on fitting type WAI IG DN 15 (1/2") x RVS 8
Conformity:
- Individual fittings with DIN-DVGW or DVGW type examination certificate or EU type examination certificate DGR, GGV

58 002 04

Alu seal for 33 kg bottles

Immediately available

Replacement seal, large flange, alum.

58 002 05

Plastic seal combi connection (5/11/33 kg)

Immediately available

Spare gasket combination, plastic

58 002 09

Seal case for liquid gas bottle regulators 120 off

Immediately available

Consisting of:
20 x 16.5 x 10.0 x 3.5 mm, NBR: small bottle
20 x 18.0 x 11.7 x 2.0 mm, aluminium: large bottle

58 003 24

Cap for 5/11 kg propane gas bottle

Immediately available

For small butane gas bottes with 5 kg and 11 kg filling weight
With fixing bracket

58 003 25

Brass tank lock without key

Immediately available

Made of brass
For cover hoods and dome covers of stationary liquid gas storage containers
No key

58 003 26

Key for tank lock

Immediately available

Made of brass
For cover hoods and dome covers of stationary liquid gas storage containers
No key

58 004 17

Double shut-off block with Quick-closing valves GF x ET-GF x GF

Currently not in stock - Time of delivery: approx. 4-5 weeks

Input pressure: max. 16 bar
For installation in multi-cylinder systems
Fixing option for support rail

58 004 23

Gas hose 300 mm 30 bar Combi connection on one side 12 mm pipe support on the other side

Immediately available

58 004 35

Automat. changeover valve type AUV PS 16 bar, 6 kg/h, pd=0.5-1.2 bar, 2x GF x ET GF x GF

Immediately available

Output: 6 kg/h
Input pressure: max. 16 bar
With rotary knob

58 004 69

Changeover valve MUV PS 25bar

Immediately available

Input pressure: max. 25 bar
For manual switching in multi-cylinder systems
Withdrawal takes place alternately, a cylinder can be changed without interrupting operation

Multiple variants

Small bottle system

Immediately available

For connection to gas cylinders (5.11 kg), for pressure regulation to the nominal pressure of the gas appliance
Removal from both sides, cylinders can be changed without interrupting operation
Pressure gauge for checking the system for leaks

Multiple variants

LPG seal case, 235-pieces

Immediately available