Leak protection systems
- For use with drinking water
- The SafeTech Connect monitoring electronics makes it easier to detect leaks. When the pre-programmed values are exceeded, the water supply is interrupted.
- Protects against water damage and waste
- Leakage protection for use with drinking water
- Leak detection cable reacts on contact with water and blocks and interrupts the water supply
- Can be combined with up to 30 WIFI water leak and frost detectors L1, for monitoring multiple areas
- Prevents unintentional leakage of liquids (water, oil, chemicals, etc.) during maintenance and repair work
- Protects open pipes and components from dirt ingress
- Use only in depressurised condition
- For use with drinking water
- The SafeTech Connect monitoring electronics makes it easier to detect leaks. When the pre-programmed values are exceeded, the water supply is interrupted.
- Protects against water damage and waste
- Use at critical points or ones that require close monitoring
- Measures humidity, room temperature and water escape
- Warns with flashing LED and loud warning tone
- Measures temperature, flow rate and pressure
- Triggering of flushing can be programmed to suit needs using stagnation time or water temperature
- Integrated Wi-Fi
- Consisting of a funnel DN 40 and a drain hose
- Suitable for Syr Hygbox
- For use as duo variant for cold and hot water
- Consisting of 2 flex hoses, a USB-C cable and a drain hose
- Consisting of 1 siphon, 2 flex hoses, 1 drain hose and 1 adjustable tube ø 32 mm with nozzle DN 25 (1”)
- Suitable for Syr Hygbox
- Enables assembly without drilling holes
- Power supply unit for HygBox Connect 2622
- Ref. no.: 1500.01.915
- To extend the monitoring range when using the L5 water leakage shut-off valve
- Wireless communication via WIFI
- Use in critical or particularly monitoring-intensive locations
- Plug-in additional cable sensor to extend the detection range
- Length: 1.5 m