Accessories
Multiple variants
Continuously adjustable speed controller surface and flush-mounted model STX
Immediately available
- Voltage: 230 V
- Overload protection
- Mounting: flush-mounted/flush-mounted
Multiple variants
Door ventilation grill
Immediately available
- Fixed transfer grille for installation in door leaf
- Made of break-resistant plastic
Multiple variants
Telescopic wall ducting
Immediately available
- To feed supply-air and waste-air lines through walls
- Consisting of two telescoping plastic tubes
- Installation length: 260–500 mm
Multiple variants
Mounting flange L-MF 100
Immediately available
- For effortless installation of HV 100 fans in connection with:
- ceiling installation
- inconvenient wall protrusion
- narrow shafts
- thin walls - Can be stacked as required
Multiple variants
Ventilation grille model LG
Immediately available
- For external wall completion
- Fixed with drip edge
- Made of impact-resistant plastic, white
Multiple variants
External grill SG
Immediately available
- For aeration and ventilation
- Material: Plastic, weather and UV-resistant
- Max. ambient temperature: 60°C
Multiple variants
Cover flap
Immediately available
- For ventilation
- Pressure loss: 10 Pa
- Material: Plastic, weather-resistant, UV-resistant
Multiple variants
Delay timer
Immediately available
- To control the switch-on delay and overrun time
- Voltage: 230 V
- Protection type: IP 40
Multiple variants
Automatic cover flap model PER
Immediately available
- Automatic
- Frame and lamellae made of impact-resistant plastic
- For external wall completion
98 004 35
Speed controller, wall mounted
Immediately available
- Variable speed control with 0 setting
- Max. switching capacity: 230 W
- Current consumption max.: 1 (A)
98 004 36
Speed controller, concealed
Only a few items left in stock
- Variable speed control
- Max. switching capacity: 230 W
- Current consumption max.: 1 (A)
98 006 11
Wall mounting set WES 90
Immediately available
- For flush-mounting of M1 models
- Adjustable from 260 to 500 mm
- External closure via automatic damper or fixed baffle
98 015 27
Blocking flap, white PER-100 W
Immediately available
- Automatic
- Frame and lamellae made of impact-resistant plastic
- For external wall completion
98 015 28
Blocking flap, white PER-125 W
Immediately available
- Automatic
- Frame and lamellae made of impact-resistant plastic
- For external wall completion
98 015 64
Blocking flap, brown PER-100 W BR
Immediately available
- Automatic
- Frame and lamellae made of impact-resistant plastic
- For external wall completion
98 015 65
Blocking flap, brown PER-125 W BR
Immediately available
- Automatic
- Frame and lamellae made of impact-resistant plastic
- For external wall completion
98 015 70
After-run relay ZR-7 230V 50Hz - approx 7 min
Immediately available
- For follow-up control of fans designed for use in bathrooms and WCs (overrun time approx. 7 min.)
- Activation via external switch (e.g. light)
- Voltage: 230 V
98 017 36
SG 15 external grille
Immediately available
- For aeration and ventilation
- External dimensions: 200 x 200 mm
- Nominal width: 150 mm
98 019 98
Interval switch VZI 10
Immediately available
- For regular ventilation of seldom used rooms
- The fan can be switched on via interval switch and via manual actuation
- Can be actuated via standard switch
98 022 57
Helios mounting panel MBR 90/160/300
Only a few items left in stock
- For installing M1 models in existing rectangular shaft openings
- Made of high-quality, impact-resistant plastic
- Ideal for old-building renovations
98 023 00
Helios operating switch 0-1-2 MVB
Immediately available
- Technical data:
- With on/off functions, low and high rotational speed
- For flush-mounted installation