alpen

• Area of application: For alloyed and unalloyed steel
  
• Shank: 6.3 mm (1/4") hexagon
  
• Design: diamond-ground cutting edges
  

• Area of application: For wood, metal, plastic and masonry
  
• Shank: 6.3 mm (1/4") hexagon
  
• Design: diamond-ground cutting edges
  

• Area of application: Beams, plywood, for soft and hard wood, chipboard, coated chipboard, veneered wood
  
• Shank: 6.3 mm (1/4") hexagon
  
• Design: diamond-ground cutting edges
  

• Area of application: For wood, metal, plastic and masonry
  
• Shank: 6.3 mm (1/4") hexagon
  
• Design: diamond-ground cutting edges
  

• Area of application: Beams, plywood, for soft and hard wood, chipboard, coated chipboard, veneered wood
  
• Shank: 6.3 mm (1/4") hexagon
  
• Design: diamond-ground cutting edges
  

• Area of application: for rotary drilling in tiles, masonry metal, wood and plastic
  
• Shaft: SDS-Plus
  
• Design: with shortened SDS-plus attachment, this means that automatic impact stop function in SDS-Plus hammer drills and hammer drills/chisel hammers is guaranteed

• For drilling soft and hard woods, chipboard and hardboard and dowel hole drilling
  
• Heat-resistant to +650°C

• Area of application: soft and hard woods, chipboard, hardboard and dowel holes
  
• Shaft: cylindrical
  
• Heat-resistant: to 650°C
  

- Application: Alloyed and unalloyed steel, copper, brass, aluminium, plastics- Shank: Cylindrical- Design: Break-resistant due to high elasticity and toughness, point angle 118°- DIN: 338 RN ...

- Application: Alloyed and unalloyed steel, copper, brass, aluminium, plastics- Shank: Cylindrical- Design: Break-resistant due to high elasticity and toughness, point angle 118°- DIN: 338 RN- In metal case ...

- Application: Alloyed and unalloyed steel, copper, brass, aluminium, plastics- Shank: Cylindrical- Design: Break-resistant due to high elasticity and toughness, point angle 118°- DIN: 338 RN- In plastic case ...

• Area of application: for concrete, natural stone, masonry
  
• Shaft: SDS-Plus
  
• Design: extremely hard tip, so is very powerful

• Area of application: concrete, natural stone, masonry
  
• Shaft: SDS-Max
  
• Design: extremely hard tip, so is very powerful

• Application: roof tiles, roofing stone, eternite, slate, ceramics, tiles, marble and granite
  
• Shaft: 6.3 mm (1/4”) hex
  
• Design: can only be used rotating without impact
  

• Application: concrete, masonry and natural stone
  
• Shaft: 6.3 mm (1/4”) hex
  
• Design: for impact drilling and without impact even in marble
  

• Area of application: alloyed and unalloyed steel, copper, brass, aluminium
  Steels < 1.300 N/mm2, Stähle > 45 HRC, stainless steels
  
• Shaft: cylindrical
  
• Design: 5% cobalt alloyed. Specially for deep holes with special groove formation
  

• Area of application: alloyed and unalloyed steel, copper, brass, aluminium
  Steels < 1.300 N/mm2, Stähle > 45 HRC, stainless steels
  
• Shaft: cylindrical
  
• Design: 5% cobalt alloyed. Specially for deep holes with special groove formation
  

- Application: Alloyed and unalloyed steel, copper, brass, aluminium, plastics- Shank: Cylindrical- Design: Break-resistant due to high elasticity and toughness, point angle 118°- DIN: 338 RN ...

• Area of application: soft and hardwood panels, chipboard, hardboard
  
• Shaft: cylindrical with 3-surface shaft
  
• Design: extremely sharp cutting edges and large ejection openings

• Area of application: for drilling in reinforced concrete
  
• Shaft: SDS-Plus
  
• Design: 4-cutter
  

- Area of application: Concrete, masonry, sand-lime brick- Shank: SDS-Max- Design: For fast breakthrough drilling ...

- Area of application: Soft and hard wood, chipboard, hard fibreboard- Shank: Cylindrical- Design: Double bevel ...

- Area of application: Soft and hard wood, chipboard, hard fibreboard- Shank: Cylindrical- Design: Double bevel ...

- Area of application: Soft and hard wood, chipboard, hard fibreboard- Shank: Cylindrical- Design: Double bevel- In plastic case ...

- Application: For tiles, masonry, metal, wood and plastic- Shank: Cylindrical- Design: Shot-peened surface, diamond-ground cutting edges and fast bore dust extraction thanks to 4-fold stepped profile- In plastic case ...

- Area of application: tough and hard materials such as rust and acid-resistant chrome-nickel steels, alloy steel and strength above 1100 N/mm², copper, brass and aluminium- Shank: 3-face shank- Design: Cross ground with 130° point angle; break-proof- DIN: 1897 PZ- In plastic case ...

• Application: for extremely hard porcelain tiles to Mohs/Ritz hardness 9, as well as glass and porcelain
  
• Shaft: anti-slip
  
• Design: centring tip allows for precise positioning
  

- Application: Alloy steel and strength above 1100 N/mm², copper, brass and aluminium- Shank: 3-face shank- Design: Cross ground with 130° point angle- DIN: 338 RN* with cylindrical shaft ...

• Application: for the hardest stoneware tiles
  
• Shaft: anti-slip and (1/4”) hexagonal shaft
  
• Design: centring tip of the tile drill enables precise positioning, concrete drill enables subsequent drilling in masonry
  

• Application: To drill larger holes in thin material or to counterbore existing holes, for burr-free and chatter-free drilling or counterboring (without predrilling) in stainless steel sheets and soft materials, suitable for manual and box column drills
  
• Design: bare surface

- Application: Alloy steel and strength above 1100 N/mm², copper, brass and aluminium- Shank: 3-face shank- Design: Cross ground with 130° point angle- DIN: 338 RN- In metal case ...

• Application: For boring cylindrical holes in materials up to 4 and/or 6 mm thick
  
• Design: bare surface

• Area of application: For soft and hard wood, chipboard, hard fibreboard and dowel hole drilling
  
• Shank: 6.3 mm (1/4") hexagon
  
• Design: Suitable for every standard cordless screwdriver and universal holder (Bit holder) due to standardised shank profile, also clamps in conventional drill chucks - no slipping due to hexagonal shank
  

• Area of application: for thin materials. Do not use for normal drilling depths
  
• Shaft: cylindrical
  
• Edge-holding thanks to optimised point grinding
  

• Area of application: for thin materials. Do not use for normal drilling depths
  
• Shaft: cylindrical
  
• Edge-holding thanks to optimised point grinding
  

• Application: for tiles, masonry, metal, wood and plastic
  
• Shaft: cylindrical
  
• Design: shot-blasted surface, diamond-ground cutting edges and fast bore dust extraction thanks to 4-step design