Berg Kabeltragsysteme
- Tested according to EN 50085-2-2
- Material: Polypropylene
- Simple to fasten and remove cover caps
- Earthed installation socket
- 2-pin, 16 A/250 V
- Suitable in cover plate with 45 track
- Hot-dip galvanised: For indoor and outdoor applications with direct weathering as well as for applications in damp rooms, but no substitute for stainless steel
- Hot-dip galvanised: For indoor and outdoor applications with direct weathering as well as for applications in damp rooms, but no substitute for stainless steel
- Hot-dip galvanised
- Hot-dip galvanised: For indoor and outdoor applications with direct weathering as well as for applications in damp rooms, but no substitute for stainless steel
- Height: 60 mm
- Hot-dip galvanised: For indoor and outdoor applications with direct weathering as well as for applications in damp rooms, but no substitute for stainless steel
- Height: 60 mm
- Tested according to EN 50085-2-2
- Material: polypropylene
- Simple to fasten and remove cover caps
- Suitable for surface-mounted installation and installation in flush-mounted and flush-mounted walls, in cavity walls and suspended ceilings
- In accordance with DIN EN 61386.21
- Classification 3321
- Protection type: during use IP20, unused state IP30
- Tested according to EN 50085-2-2
- Max. load: 1500 N (small surface), 2000 N (large surface)
- Protection type: during use IP20, unused state IP30
- Tested according to EN 50085-2-2
- Max. load: 1500 N (small surface), 2000 N (large surface)
- For use on the floor box
- For blind and/or folding lids
- Incl. reinforcement plates
- Suitable for order no.: 62 010 29
- Electrolytic galvanized
- Colour: black RAL 9011
- For wall mounting and Fastening to hanging supports
- Material: steel, hot-dip galvanised
- Max. Load: 175 daN
- For all underfloor ducts widths
- Suitable for square, rectangular and round covers
- Side walls also provided for pipes ø 16 mm (break-out openings)
- Tested according to EN 50085-2-2
- Material: Polypropylene
- To protect the underside of the device casing when using energy cables
- Tested according to EN 50085-2-2- Material: polypropylene- In the case of 62 010 28, the divider must be removed for the 3-fold plug-in system.- For unused openings use cover cap (order no.: 62 010 31)- Colour: black RAL 9011 ...
- For 3 data technology installation plates
- Tested according to EN 50085-2-2
- Material: polypropylene
- Tested according to EN 50085-2-2
- Material: Polypropylene
- Simple to fasten and remove cover caps
- Tested according to EN 50085-2-2
- Material: Polypropylene
- Simple to fasten and remove cover caps
- Protection type: unused state IP30
- Tested according to EN 50085-2-2
- Max. load: 1500 N (small surface), 2000 N (large surface)
- Instead of screwing, just push together
- With pre-drilled fastening holes
- No additional parts required for potential equalisation
- Instead of screwing, just push together
- With pre-drilled fastening holes
- No additional parts required for potential equalisation
- Earthed installation socket
- 2-pin, 16 A/250 V
- Suitable in cover plate with 45 track
- Earthed installation socket
- 2-pin, 16 A/250 V
- Suitable in cover plate with 45 track
- Earthed installation socket
- 2-pin, 16 A/250 V
- Suitable in cover plate with 45 track
- Earthed installation socket
- 2-pin, 16 A/250 V
- Suitable in cover plate with 45 track
- Earthed installation socket
- 2-pin, 16 A/250 V
- Suitable in cover plate with 45 track
- Earthed installation socket
- 2-pin, 16 A/250 V
- Suitable in cover plate with 45 track
- Earthed installation socket
- 2-pin, 16 A/250 V
- Suitable in cover plate with 45 track
- Stainless steel
- Clip-on
- Hot-dip galvanised: For indoor and outdoor applications with direct weathering as well as for applications in damp rooms, but no substitute for stainless steel
- Height: 60 mm
- Hot-dip galvanised
- Screw fitting
- Height: 60 mm
- Sendzimir-galvanised
- Recommended: 2 units per metre
- Hot-dip galvanised
- For vertical attachment of the cable ladders
- Hot-dip galvanised
- For hanger HSLECL
- Clip-on