evenes: Tanks and Freshwater stations
Multiple variants
Hot water storage tank EV-TWS-1W with heat exchanger, steel (S235JR) enamelled according to DIN 4753.3
Immediately available
- EV-TWS 120 to EV-TWS 500 with 75 mm PU hard foam-filled insulation and 5 mm foil sheath in RAL 9010 white, pre-assembled
- EV-TWS 800 and EV-TWS 1000 with 120 mm insulation in RAL 9010 white, pre-assembled, removable
- Operating pressure: max. 10 bar
Multiple variants
Integral hot water tank EV-TU-TWS-1W
Immediately available
- Container: Steel (S235JR), enamelled in accordance with DIN 4753 (TÜV-tested)
- Suitable for direct assembly below condensing boilers
- Incl. insulation:
Multiple variants
EV-TWS-2W hot water/solar cylinder, with two heat exchangers heat exchangers
Immediately available
- Container: steel (S235JR), enamelled in accordance with DIN 4753 (TÜV tested)
- EV-TWS 200 to EV-TWS 500 with 75 mm PU hard foam-filled insulation and 5 mm foil sheath in RAL 9010 white, pre-assembled
- EV-TWS 800 and EV-TWS 1000 with 120 mm insulation in RAL 9010 white, pre-assembled, removable
Multiple variants
Heat pump storage tank/hot water tank EV-WP-TWS-1W, with a heat exchanger
Immediately available
- Material: steel (S235JR), enamelled in accordance with DIN 4753 (TÜV tested)
- EV-WP-TWS 300 to EV-WP-TWS 500 with 75 mm PU hard foam-filled insulation and 5 mm foil sheath in RAL 9010 white, pre-assembled
- EV-TWS 600 and EV-TWS 1000 with 120 mm insulation in RAL 9010 white, pre-assembled
Multiple variants
Hot water/solar tank EV-TWS-2W-Compact, with two heat exchangers
Immediately available
- Container: Steel (S235JR), enamelled in accordance with DIN 4753 (TÜV-tested)
- EV-TWS-2W-Compact with 75 mm PU hard foam-filled insulation and 5 mm foil sheath in RAL 9010 white, pre-assembled
- Max. operating pressure: 10 bar
Multiple variants
Heat pump/hot water tanks EV-WP-TWS-2W, with two heat exchangers
Immediately available
- Material: Steel (S235JR), enamelled in accordance with DIN7453 (TÜV-tested)
- EV-WP-TWS 300 to EV-WP-TWS 500 with 75 mm PU hard foam-filled insulation and 5 mm foil sheath in RAL 9010 white, pre-assembled, energy efficiency class: A
- EV-WP-TWS 600 to EV-WP-TWS 1000 with 120 mm fleece insulation in RAL 9010 white, pre-assembled, energy efficiency class: C
Multiple variants
Heat pump/hot water double tank EV-WPDS
Immediately available
- Hot water tank with integrated Buffer tank
- Material:
- Hot water tank: Steel (S235 JR) enamelled according to DIN 4753 (TÜV-tested)
- Buffer tank: Steel S235 JR, untreated inside - EV-WPDS with 75 mm PU rigid foam composite insulation and 5 mm foil jacket in RAL 9010 white, pre-assembled, energy efficiency class: A
Multiple variants
Layer buffer tank EV-SPS, no heat exchanger
Immediately available
- Material: steel (S235 JR) raw interior, primed exterior
- EV-SPS 300 bis EV-SPS 500 with 75 mm PU hard foam-
insulation and 5 mm foil sheath in RAL 9010 white, pre-mounted - EV-SPS 600 to EV-SPS 2000 with 120 mm fleece insulation in RAL
9010 white, pre-assembled, removable
Multiple variants
Layer buffer tank EV-SPS-1W, with a heat exchanger
Immediately available
- Material: steel (S235 JR) raw interior, primed exterior
- EV-SPS 300 bis EV-SPS 500 with 75 mm PU hard foam-filled composite insulation and 5 mm foil sheath in RAL 9010 white, pre-assembled
- EV-SPS 600 to EV-SPS 2000 with 120 mm fleexe insulation in RAL 9010 white, pre-assembled, removable
Multiple variants
Layer buffer tank EV-SPS-2W, with two heat exchangers
Immediately available
- Material: steel (S235 JR) raw interior, primed exterior
- EV-SPS 300 bis EV-SPS 500 with 75 mm PU hard foam-filled composite insulation and 5 mm foil sheath in RAL 9010 white, pre-assembled
- EV-SPS 600 to EV-SPS 2000 with 120 mm fleexe insulation in RAL 9010 white, pre-assembled, removable
Multiple variants
Warmwasser-/Solarspeicher EV-TEDS-2W, Edelstahl, mit zwei Wärmetauschern
Immediately available
- Container: Stainless steel (1.4404)
- EV-TEDS 300 to EV-TEDS 500 with 75 mm PU hard foam-filled composite insulation and 5 mm foil sheath in RAL 9010 white, pre-assembled
- Max. operating pressure: 10 bar
Multiple variants
Hygiene combi tank EV-HKS, no heat exchanger
Immediately available
- Material: steel (S235 JR) raw interior, primed exterior
- EV-HKS 500 with 75 mm PU hard foam insulation and 5 mm foil sheath in RAL 9010 white, pre-assembled
- EV-HKS 600 to EV-HKS 2000 with 120 mm fleece insulation in RAL 9010 white, pre-assembled
Multiple variants
Hygiene-Kombispeicher EV-HKS, mit einem Wärmetauscher
Immediately available
- Material: steel (S235 JR) raw interior, primed exterior
- EV-HKS 500 with 75 mm PU hard foam insulation and 5 mm foil sheath in RAL 9010 white, pre-assembled
- EV-HKS 600 to EV-HKS 2000 with 120 mm fleece insulation in RAL 9010 white, pre-assembled
Multiple variants
Hygiene-Kombispeicher EV-HKS, mit zwei Wärmetauscher
Immediately available
- Material: steel (S235 JR) raw interior, primed exterior
- EV-HKS 500 with 75 mm PU hard foam insulation and 5 mm foil sheath in RAL 9010 white, pre-assembled
- EV-HKS 600 to EV-HKS 2000 with 120 mm fleece insulation in RAL 9010 white, pre-assembled
Multiple variants
Warmwasserspeicher EV-TEDS-1W, Edelstahl, mit einem Wärmetauscher
Immediately available
- Container: Stainless steel (1.4404)
- EV-TEDS 150 to EV-TEDS 500 with 75 mm PU hard foam-filled composite insulation and 5 mm foil sheath in RAL 9010 white, pre-assembled
- Max. operating pressure: 10 bar
Multiple variants
Easyflow fresh water stations 4 U, version up to 100 kW
Immediately available
- For hygienic Hot water heater using the instantaneous water heater principle from Buffer tanks
- Completely pre-assembled, insulated, factory-tested and ready to plug in (Schuko plug)
- Electronic controls
Multiple variants
Hot water tank pressure-resistant OGB SMZ 50-150 litres 230/400 V
Immediately available
- For one or more tapping points
- Indirect tubular air heating system
- For single-circuit and dual-circuit operation (night tariff)
Multiple variants
Easyflow Fresh 1 T fresh water station, thermal
Immediately available
- For hygienic hot water preparation using the instantaneous water heater principle with buffer tanks
- Completely pre-assembled, insulated, factory-tested and ready to plug in (earthed plug)
- Without digital control, easy adjustment of the desired hot water temperature on the integrated thermometer
Multiple variants
Easyflow fresh water stations Easyflow-Fresh 1, thermal
Immediately available
- Completely pre-assembled, insulated, factory-tested and ready to plug in (earthed plug)
- Without digital control, easy adjustment of the desired hot water temperature on the integrated thermometer
- Water heating from 1 L / min tapping quantity, controlled by differential pressure switch
Multiple variants
EPO2 Pressure-resistant small instantaneous water heater
Immediately available
- Connections: DN 10 (3/8")
- Variable installation as top or under-sink device
- Only for one tapping point
Multiple variants
Depressurised hot water tank TEG, 5 - 10 litres
Immediately available
- Only for one tapping point
- Short supply pipes, low heat loss
- Plastic boiler
Multiple variants
Pressure-resistant electric hot water tank GT, 5 - 15 litres - EVENES
Immediately available
- For one or more tapping points
- Safety valve must be used with pressure connection
- Can be used with a suitable connection and mixing battery as a depressurised hot water tank for one tapping point only
Multiple variants
Pressure-resistant electric hot water tank TG, 30 - 150 Ltr
Immediately available
- NOTE: Delivery from 100 litres!
- For one or more tapping points
- Safety valve must be used with pressure connection
Multiple variants
Electric hot water tank OTG Slim SM, 30 - 100 litre - EVENES
Immediately available
- For one or more tapping points
- Safety valve must be used with pressure connection
- Oval design
Multiple variants
Electric hot water tank OGB Slim SM, with indirect pipe air heating system 30 - 100 litre
Immediately available
- For one or more tapping points
- Safety valve must be used with pressure connection
- Oval design
Multiple variants
Tank safety unit EVENES SpeiSIGru I, DN 15 (1/2”) ET for hot water tank
Immediately available
- Suitable for horizontal and vertical installation
- With insulation
Technical data: - Max. operating pressure: 10 bar
Multiple variants
tank safety group EVENES SpeiSIGru II, DN 20 (3/4”) ET
Immediately available
- Suitable for horizontal and vertical installation
- With insulation
Technical data: - Max. operating pressure: 10 bar
Multiple variants
Tank safety unit EVENES SpeiSIGru III, with pressure reducer, DN 20 (3/4”) ET for hot water tank
Immediately available
- Suitable for horizontal and vertical installation
- With insulation
Technical data: - Max. operating pressure: 10 bar
90 017 93
Plain plate 100 mm PU = 3 pieces
Immediately available
- Dimensions (ø x H): 100 x 3 mm
- PU = 3 pieces
90 128 77
DomusCirc 1 Circulation Set - kvs 3.4
Immediately available
- For hygiene combi tanks with corrugated pipe heat exchangers
- With drinking water mixing valve
- Corrugated pipe immersion lance made of stainless steel
93 170 78
Promotions set small instantaneous water heater Evenes 5 x + 1 x free of charge
Immediately available
- 5 x Evenes small instantaneous water heater
- Variable mounting as counter-top or under-sink unit
- Only for one tapping point
93 272 92
5-litre under-sink storage tank advantage package + Sink mixer Rumba ND
Immediately available
- Package consisting of:
- 1x TEG 5-U for hot water tank depressurised, 5 litres, 2 kW nominal output, 230 V, 50 Hz
- Nominal current [A]
8.7
97 008 59
Solar connection pipework set for EVENES EV-TWS-Compact solar storage tank
Immediately available
- For directly mounting an Evenes solar station to solar tank EV-TWS-2W-Compact
- Length: approx. 500 mm
Consisting of: - 2 curved C-steel pipes Ø 22 mm