Fischer: Plugs and accessories

• The tilting element of the dowel opens automatically behind the plate and provides its load capacity
  
• It functions like an expansion plug for drill hole strikes in solid materials such as concrete or wood
  
• Especially suitable for shallow cavities
  

• The tilting element of the dowel opens automatically behind the plate and provides its load capacity
  
• It functions like an expansion plug for drill hole strikes in solid materials such as concrete or wood
  
• Especially suitable for shallow cavities
  

• Long expansion zone with 90 mm anchoring depth for maximum loads in aerated concrete
  
• Second expansion zone and 70 mm anchoring depth for solid and perforated building materials
  
• Application: Façade, ceiling and roof constructions made of wood or metal, gates, doors, metal angles, etc.
  

• Tilting function: With white collar sleeve and strap
  - Can be used as a toggle plug for cavities and as an expansion anchor for drill holes in various building materials
  
• Area of application: Concrete, wood, plasterboard, gypsum fibreboard, wood panels such as OSB panels, chipboard, MDF panels, steel panels, plastic panels, hollow concrete blocks
  
• Application: Kitchen wall cabinets, living room cabinets, shelves, wardrobes, handrails, pictures, mirrors, lamps, heavies, hanging baskets
  

• Suitable for plasterboard, plaster fibreboard, lightweight cement boards
  
• Self-screwing wall plugs
  
• Centring tip for pinpoint accurate positioning
  

• With internal thread
  
• Material: plastic
  
• Short dowel length prevents reinforcement damage
  

• Wall plug enables expansion in solid building materials or knotting in all cavities
  
• Suitable for:
  - Concrete, aerated concrete
  - Lime sand solid/perforated brick
  - Gypsum plasterboard and gypsum fibreboards
  - Prestressed concrete and hollow ceiling slabs
  - Solid block made of lightweight concrete
  - Chipboard
  - Natural stone with a Sealing structure
  - Hollow blocks made of lightweight concrete
  - Solid bricks, vertically perforated bricks
  - Solid plasterboard
  - Hollow ceilings made of brick, concrete or similar.
  
• PU = 25 pieces

- Two material components for optimum load values and safe functions (expansion, folding), depending on the building material- Full expansion: anchor can be expanded, folded and knotted- Application: SHK fixings, mirror cabinets, etc.- Area of application: Concrete, solid brick, solid sand-lime bric ...

• Dowel geometry enables expansion in solid building materials or knotting in all cavities
  
• Full expansion: Knotted / expanded, with connecting webs
  
• Area of application: Concrete, solid sand-lime brick, high-gloss sealant, plasterboard and gypsum fibreboard, prestressed concrete and hollow ceiling panels, solid brick made of lightweight concrete, perforated sand-lime brick, chipboard, etc.
  

• Optimum retention values together with scaffolding eyelet GS 12
  
• Suitable for:
  - S 14 ROE: Concrete, sand-lime brick, solid brick
  - S 16 H 160 R: vertically perforated brick, sand-lime hollow brick, aerated concrete

• With edge
  
• With screws
  
• Galvanised steel

• Suitable for:
  - Concrete
  - Natural stone with a Sealing structure
  - Solid brick
  - Lime sand - solid brick
  - Solid brick made of lightweight concrete
  - Hollow ceilings made of brick, concrete or similar.
  
• For metric screws and threaded bolts

• The large outer diameter of the plug ensures that the load is distributed over a large area for maximum load capacity.
  
• Inner cone made of brass
  
• Application: e. g. machines, protective grilles, control cabinets, plant construction
  

• Feed-through mounting
  
• With impact lock
  
• The plug expands when the nail screw is knocked in and contact pressure holds it to the bore-hole wall
  

• 2-component Wall plug that completely seals the drill hole without Silicones in all wet areas
  
• Full expansion: Wall plug can be expanded, folded and knotted, sealing
  
• Area of application: concrete, solid brick, lime sand, vertically perforated brick, aerated concrete, etc.
  

• Pre-positioned installation
  
• Expands and anchors brass dowels in the front area
  
• Suitable for metric screws and threaded bolts
  

• Pre-positioned installation
  
• Setting tool is required
  
• Suitable for wooden screws and metric screws
  

• Pre-positioned installation
  
• Expands and anchors brass dowels in the front area
  
• Requires only a shallow anchorage depth, suitable for thin slab building materials
  

- Plastic expansion anchor- Anchoring of wooden steps and wooden boards >30 mm on steel profiles- Optimum holding forces only when fastener is glued into the wooden step with cold glue- Elastic shaft geometry absorbs vibrations- Prevents creaking noises- Short expansion element requires little hollo ...

• Pre-positioned installation
  
• Easy assembly
  
• Suitable for wooden screws and metric screws
  

• Plastic nail plug
  
• Wall plug ø: 10 mm
  
• Drive: PZ 3
  

• Long expansion zone with 90 mm anchoring depth for maximum loads in aerated concrete
  
• Second expansion zone and 70 mm anchoring depth for solid and perforated building materials
  
• Application: Façade, ceiling and roof constructions made of wood or metal, gates, doors, metal angles, etc.
  

• ø = 6 mm
  
• Drive: PZ 2
  
• Feed-through mounting
  

• Plastic nail plug
  
• Wall plug ø: 6 mm
  
• Drive: PZ 2
  

• Plastic nail plug
  
• ø= 6 mm
  
• Drive: PZ 2
  

• Plastic nail plug
  
• Wall plug ø: 8 mm
  
• Drive: PZ 3
  

• Plastic nail plug
  
• ø= 8 mm
  
• Drive: PZ 2
  

- Plastic expansion anchor- Anchoring in concrete, solid building materials- Optimum holding forces only when fastener is glued into the wooden step with cold glue- TBB enclosed plastic washers enable compensation of unevenness- Elastic shaft geometry absorbs vibrations- Prevents creaking noises- Sc ...

• Hole ø: 8 mm
  
• Drive: T30
  
• With countersunk head screw: whenever flush countersinking of the head is required
  

• Hole ø: 10
  
• Drive: T50
  
• With countersunk head screw: whenever flush countersinking of the head is required
  

• Hole ø: 10 mm
  
• Drive: T40
  
• Spanner size: 13
  

• Long expansion zone with 90 mm anchoring depth for maximum loads in aerated concrete
  
• Second expansion zone and 70 mm anchoring depth for solid and perforated building materials
  
• Application: Façade, ceiling and roof constructions made of wood or metal, gates, doors, metal angles, etc.
  

• Hole ø: 10 mm
  
• Drive: T40
  
• With countersunk head screw: whenever flush countersinking of the head is required
  

• Hole ø: 10 mm
  
• Drive: T40
  
• Spanner size: 13
  

• DuoPower: Adapts automatically to the existing building material, high load values through folding, spreading and knotting
  
• DuoSeal: Seals drill holes completely without additional sealant
  
• Scope of delivery:
  - DuoPower 8 x 40 mm: 500 pieces
  - DuoSeal 8 x 48 mm: 25 pieces
  - Semicircular head sealing screw, T20, ø 6 mm, length 70 mm, stainless steel A2: 25 pieces

- Two material components for optimum load values and safe functions (expansion, folding), depending on the building material- Full expansion: anchor can be expanded, folded and knotted- Application: SHK fixings, mirror cabinets, etc.- Area of application: Concrete, solid brick, solid sand-lime bric ...