GOK

• For connecting fittings,
  pipes to compression fittings
  
• Connections:
  DN 8 (G 1/4“) LH union nut x pipe support 8 mm
  
• Resistant to temperatures down to -30°C
  

• For the removal of fuels in single- and two-line systems
  from underground and above-ground tanks
  
• Rotating tank connection
  
• Quick closing extraction valve
  

• For the removal of fuels in single- and two-line systems
  from underground and above-ground tanks
  
• Rotating tank connection
  
• Quick closing extraction valve
  

• For monitoring:
  - Double-walled containers, even if their interstitial space is still partially filled with leak detection liquid
  - Single-walled tanks with leak protection lining (inner shells)
  
• Approvals:
  - General building authority approval no. Z-65.22-2
  - Variant IIIF: Type approval 02/PTB No. III B/S 1277
  - Variant IVF: Type approval 02/PTB No. III B/S 1278
  
• Must not be installed in an Ex zone
  Variant DIII F
  PPAus - 450 mbar
  PPEin - 375 mbar
  PAOn - 325 mbar
  PAOff - 410 mbar
  Variant DIV F
  PPOff - 80 mbar
  PPOn - 65 mbar
  PAOn - 34 mbar
  PAOff - 50 mbar
  (All data are approximate values)

• Suitable for ASF vacuum leak indicator

• Shut-off element triggered by heat, to protect the consumption device from temperatures that are impermissibly high; automatically shuts off the flow at temperatures above +100°C
  
• Particularly suitable as device shut-off valve
  
• EC type examination according to GGR
  

• For connection to gas cylinders with a filling weight of 33 kg, for pressure regulation to the nominal pressure of the gas appliance
  
• Also suitable for commercial use
  
• Cylinders can be changed without interrupting operation
  

• For connection to gas cylinders with a filling weight of 33 kg, for pressure regulation to the nominal pressure of the gas appliance
  
• Also suitable for commercial use
  
• Cylinders can be changed without interrupting operation
  

•  Material: hot-dip galvanised sheet steel
  
• Lockable: square lock including square keys
  
• Suitable for all 33 kg gas bottles

• Material: hot-dip galvanised sheet steel
  
• Lockable: square lock including square keys
  
• Suitable for all 11 kg gas bottles

• For oil storage tank
  
• With spacer star attachment to keep distance from tank base
  
• With backflow preventer
  

• Backflow preventer for oil suction pipes
  to DIN EN 12514-2
  
• With spacer spring

• Material: steel
  
• For Cu pipes
  
• Series L
  

• Material: steel
  
• For Cu pipes
  
• Series L
  

• Material: steel
  
• For Cu pipes
  
• Series L
  

• According to DIN 3870
  
• With O-ring seal for cutting ring fittings in accordance with DIN 2353 / DIN EN 8434-1
  
• Series L

• Non-adjustable
  
• For connection to liquid gas cylinders up to 14 kg
  
• On outlet side, 2 or 3 outlets
  

• Hose breakage protection devices prevent excess gas from escaping in the event of damage or hose loosening and close up the passage of gas as soon as the prescribed operating quantity is exceeded max. 10% above the nominal flow rate.
  Fitted between controller and hose. Commercial for hoses >400 mm and private >1500 mm. Exclusively for outdoor use.
  A small amount of gas provides pressure equalisation, causing the hose breakage protection to
  open automatically.
  
• Nominal flow rate: 1.5 kg/h
  
• DN 8 (G ¼) LH union nut x DN 8 (G ¼) LH-KN
  

• For connection to liquid gas cylinders up to 14 kg
  
• KLF x DN 8 (1/4”) LH-KN
  
• Outlet pressure: 50 mbar
  

• For connecting valves, consumer devices and pipes
  
• Connections: DN 8 (G 1/4“) LH union nut x plug-in nozzle
  
• Resistant to temperatures down to -30°C
  

• galvanized, straight coupling,
  with brass olive.
  
• According to ISO 8434-1/DIN 2353, series L (LL), galvanised steel, for easy and secure connection of metric pipes
  
• Notes: When working with thin-walled or soft pipes, use reinforcing sleeves; in conjunction with gas as the medium according to G260 use steel cutting
  rings; mineral oil is suitable for lubrication during assembly.
  * With steel cutting ring

• straight reduced,
  galvanized, with brass olive.
  
• According to ISO 8434-1/DIN 2353, series L (LL), galvanised steel, for easy and secure connection of metric pipes
  
• Notes: When working with thin-walled or soft pipes, use reinforcing sleeves; in conjunction with gas as the medium according to G260 use steel cutting
  rings; mineral oil is suitable for lubrication during assembly.

• straight screw-in, tapered thread,
  galvanized, with brass olive.
  
• According to ISO 8434-1/DIN 2353, series L (LL), galvanised steel, for easy and secure connection of metric pipes
  
• Notes: When working with thin-walled or soft pipes, use reinforcing sleeves; in conjunction with gas as the medium according to G260 use steel cutting
  rings; mineral oil is suitable for lubrication during assembly.

• GEV = Straight screw-in connection
  NPT thread (American tapered pipe thread ANSI B 1.20.1)
  
• Galvanised
  
• With brass cutting ring
  
  

• Galvanised

D = steel cutting ring ...

brass ...

• Tee reduced,
  galvanized, with brass olive.
  
• According to ISO 8434-1/DIN 2353, series L (LL), galvanised steel, for easy and secure connection of metric pipes
  
• Notes: When working with thin-walled or soft pipes, use reinforcing sleeves; in conjunction with gas as the medium according to G260 use steel cutting
  rings; mineral oil is suitable for lubrication during assembly.

• TV = T-screw connection
  
• Galvanised
  
• With brass cutting ring

• elbow, galvanized,
  with brass olive.
  
• According to ISO 8434-1/DIN 2353, series L (LL), galvanised steel, for easy and secure connection of metric pipes
  
• Notes: When working with thin-walled or soft pipes, use reinforcing sleeves; in conjunction with gas as the medium according to G260 use steel cutting
  rings; mineral oil is suitable for lubrication during assembly.

• reduced elbow,
  galvanized, with brass olive.
  
• According to ISO 8434-1/DIN 2353, series L (LL), galvanised steel, for easy and secure connection of metric pipes
  
• Notes: When working with thin-walled or soft pipes, use reinforcing sleeves; in conjunction with gas as the medium according to G260 use steel cutting
  rings; mineral oil is suitable for lubrication during assembly.

• straight screw-on,
  galvanized, with brass olive.
  
• According to ISO 8434-1/DIN 2353, series L (LL), galvanised steel, for easy and secure connection of metric pipes
  
• Notes: When working with thin-walled or soft pipes, use reinforcing sleeves; in conjunction with gas as the medium according to G260 use steel cutting
  rings; mineral oil is suitable for lubrication during assembly.

• Straight screw-in connection
  
• Galvanised
  
• With brass cutting ring
  

• Brass screw connection
  WEV = Elbow screw-in connection
  
• Conical thread
  
• Galvanised