Tool

• For all common pressfitting systems ø (mm): 12-110
  
• 270° rotatable press tong holder
  
• Safety locking mechanism
  

• Application: sheet metal, non-ferrous metals, iron, cast iron
  
• Shaft: cylindrical
  
• Design: with bevelled edge chisel, 118° tip angle
  

for system: W+S Press, evenes Press, ANBO Uni-Press, APE Raccordi a pressare, BAMPI BALPED, BALPEX, BUCCHI tech MP, COMAP Sudo-Press Multiskin, Dalpex LaserMulti Dalpex, Dalpex Laser Multinox, DiaNorm HKS SITEC Pres, EMPUR PEXPRESS, eurotherm, MULTISTRATO, Euro 2000, Gabo, Gabopress H+S, GAROS, Giac ...

for system:Armaturjonsson BALLOFIX PRES, Broen BALLOFIX PRES, COMAP Sudo-Press Cu, egeda Frau.BO-PRES, F.B.Q.BARONIO, BQ pres, +GF+ PRESSFIT, Niro San, IBP>BB ...

• Material to be cut: thin sheet metals (1.5-4 mm), pipes/profiles (ø <175 mm)
  
• Application: flush cutting in metals
  
• Tooth pitch (mm): 1.4
  

• Battery capacity (Ah): 1.5 - 5.0
  
• Torque (Nm) max.: 40
  
• Torque pre-selection: yes
  

• Suitable for armoured conduits from copper, brass, stainless steel, steel
  - Suitable for stripping SWA cables
  
• For ø 6-76 mm (1/4” - 3”) and wall thickness up to 2 mm
  
• One-hand quick adjustment
  

• Torque (Nm) max.: 90
  
• Torque pre-selection: Yes
  
• Brushless motor: Yes
  

• Suitable for: carbon steel/stainless steel/copper
  
• Pipe ø (mm): 35/42/54
  
• Max. pipe wall thickness (mm): 1.5
  

für System: evenes Edelstahl Presssystem, evenes Presssystem, ANBO C-Press, Armaturjonsson BALLOFIX PRESS, Broen BALLOFIX PRES, +GF+ PRESS FIT, Niro San, HAGE DOMINOX, Hs System, Heizung, IMI Woeste, KOHLER, InoxPRES, Mair Heiztechnik, Gomafix, Mapress / C-Stahl/Edelstahl, Kupfer/Kupfer Gas, SANHA ...

for system:Armaturjonsson BALLOFIX PRES, Broen BALLOFIX PRES, COMAP Sudo-Press Cu, egeda Frau.BO-PRES, F.B.Q.BARONIO, BQ pres, +GF+ PRESSFIT, Niro San, IBP>BB ...

• Made of chrome vanadium electric steel, multi-stage hardened
  
• Manufactured according to DIN 8976
  
• Gripping surfaces with specially hardened teeth, hardness of teeth approx. 61 HRC
  

• Needle-bearing cutting wheel
  
• Ideal for particularly hard pipes such as carbon steel or stainless steel
  
• Quick adjustment

• High work efficiency thanks to 3 x 360° lines: carry out horizontal and vertical levelling work throughout the room simultaneously with just one tool
  
• Dual Power supply thanks to operation with 12 V Batteries or alkaline batteries
  
• Protection class: IP 65
  

• Needle-bearing cutting wheel
  
• Ideal for particularly hard pipes such as carbon steel or stainless steel
  
• Quick adjustment

• Needle-bearing cutting wheel
  
• Ideal for particularly hard pipes such as carbon steel or stainless steel
  
• Quick adjustment

• Consisting of:
  
• 1/4" 2C lever reversible ratchet, fine-toothed, 72 teeth, 150 mm
  
• 1/4" square socket handle, 165 mm
  

• Made from chrome vanadium electric steel
  
• Gentle assembly of surface-finished fittings
  
• Quick adjustment at the touch of a button
  

• Ideal for maintenance and car bodywork operations
  
• No HF-start
  - HF-free ignition extends the life of consumables and eliminates electromagnetic interference that could damage other nearby electronic devices.
  
• Connection to a compressed air system required
  

• For copper, brass and stainless steel pipes
  
• One-handed fast adjustment
  
• Replacement cutting wheel in handle
  

• Gases detected*: Methane, hydrogen, propane, ethylene, ethane, hexane, iso-butane, benzene, iso-butane, ethanol, acetaldehyde, toluene, P-xylene, methane, ammonia, hydrogen sulphide
  
• Detection range: 0-6400 ppm
  
• Alarm sensitivity: 40 ppm
  

• For 3/4" (20 mm) to 1 1/2" (40 mm) pipes up to 9 m
  
• AUTOFEED® 2-way spiral feed, keeps your hands clean, the spiral is not touched when advancing and retracting
  
• Spiral with inner core
  

für System: evenes Edelstahl Presssystem, evenes Presssystem, ANBO C-Press, Armaturjonsson BALLOFIX PRESS, Broen BALLOFIX PRES, +GF+ PRESS FIT, Niro San, HAGE DOMINOX, Hs System, Heizung, IMI Woeste, KOHLER, InoxPRES, Mair Heiztechnik, Gomafix, Mapress / C-Stahl/Edelstahl, Kupfer/Kupfer Gas, SANHA ...

für System: evenes Edelstahl Presssystem, evenes Presssystem, ANBO C-Press, Armaturjonsson BALLOFIX PRESS, Broen BALLOFIX PRES, +GF+ PRESS FIT, Niro San, HAGE DOMINOX, Hs System, Heizung, IMI Woeste, KOHLER, InoxPRES, Mair Heiztechnik, Gomafix, Mapress / C-Stahl/Edelstahl, Kupfer/Kupfer Gas, SANHA ...

for system:Armaturjonsson BALLOFIX PRES, Broen BALLOFIX PRES, COMAP Sudo-Press Cu, egeda Frau.BO-PRES, F.B.Q.BARONIO, BQ pres, +GF+ PRESSFIT, Niro San, IBP>BB ...

for system:Armaturjonsson BALLOFIX PRES, Broen BALLOFIX PRES, COMAP Sudo-Press Cu, egeda Frau.BO-PRES, F.B.Q.BARONIO, BQ pres, +GF+ PRESSFIT, Niro San, IBP>BB ...

• - SL, length (mm): 3.5 x 0.6, 100/4.5 x 0.8, 125/5.5 x 1.0, 150/6.5 x 1.2, 150
  - PH, length (mm): PH1, 80/PH2, 100
  
• Round blade made of chrome-vanadium-molybdenum-steel
  
• Fully tempered and matt chrome-plated

• - VDE-tested safety up to 1000 volts
  - SL, length (mm): 3.0 x 0.5/4.0 x 0.8, 100/5.5 x 1.0, 125/6.5 x 1.2, 150
  - PH, length (mm): PH1, 80/PH2, 100
  - Blade high-quality chrome-vanadium-molybdenum steel, through-hardened, burnished
  
• Protective insulation 1,000 V AC, VDE and GS tested
  
• Blade: protective insulation sprayed directly onto the blade.
  

• Hexagonal ball head on the long leg
  
• SW (mm): 1.5/2/2.5/3/4/5/6/8/10
  spherical head makes it possible to tighten screws at an angle of up to 25°

• Cuts in several strokes using ratchet principle
  
• Right-angled cuts can be made with movable support jaws
  
• Suitable for thick-walled plastic and composite pipes
  

• Made from aluminium
  
• Lockable metal locks
  
• Dimensions (mm): 455 x 157 x 355
  

• Max. span width: 32 mm
  
• Length: 250 mm
  
• End piece for 13 mm nuts
  

• For plastic and multi-layer composite piping made of PVC, PE, PER, PEX
  
• Soft Touch® handle: non-slip grip for a secure hold
  
• V-shaped blade for easier vertical cutting and low deformation
  

• For chipless cutting of pipes
  
• Standard-compliant shortening of drip and sealing pipes close to the wall
  
• Suitable for plastic pipes with a diameter of 20-50 mm and a wall thickness of 2.4 mm
  

• Small enough for use in confined areas yet powerful enough to remove stubborn blockages
  
• Ideal for roof ventilators, the rear handle allows easy transport over Ladders and onto roofs
  
• Special user-friendly, immediately gripping spiral clutch optimises operation
  

• Working range (mm): 975-2500
  
• Thread: 1/4”
  
• Weight (kg): 3.4