Drainage programme

• Suitable rubber nipple for the connection piece:
  - DN 40: Order no.: 93 008 15
  - DN 50: Order no.: 93 008 40
  

• Hose sizes: 8-12 mm, 15-21 mm
  
• For washing machines and condensation dryers

- For plastic waste water pipes- Flexible- Material: TPE- According to EN 681-2 ...

• Concentric plug-in fitting
  
• For HT pipes and wastewater pipes
  
• Tested to DIN 4102-B2
  

• For subsequent connection to PVC pipes
  
• Cut the intake opening using a jigsaw or an angle grinder
  
• Material PVC-U

• Temperature resistance: +60°C
  
• Material: PVC

• Certification number: Z-42.1-394
  
• Material: PP

• Material: Expanded polyethylene
  
• Thermal conductivity (EN 12667): 0.041 W7mK
  
• Wall thickness: 16 mm
  

• For retrofitting on cast iron cleaners for discharging waste water
  
• Flame retardant according to DIN 4102-B2
  
• Material: PP

• Hose size ø: 8.5 - 26.5 mm

• Due to the massive increase in cross-section and the smooth inner surface, as well as the horizontal narrowing of the cross-section to the original cross-section at the top, the rat has no chance of climbing through to the top
  
• Only suitable for vertical installation
  
• No movable flaps
  

• The TRIPLUS pipe is composed of three layers:
  an inner and outer layer of polypropylene (PP) copolymer
  and a middle layer of polypropylene (PP) with added minerals
  
• The TRIPLUS system has a noise level of 12 dB(A)
  with a water flow rate of 2 l/s.
  
• Pipes and the TRIPLUS connection comply with the requirements of the UNI EN 1451 standard
  

• Grey, self-extinguishing polypropylene for plugs
  
• The HT drains are made from thermoplastic polypropylene
  
• Size stability; enables assembly with elastomer rings
  

• For HT pipes
  
• Tested according to DIN EN 1451-1 and DIN 4102-B2
  
• Approval number DIBt Z-42.1-366

• For wastewater pipe
  
• Tested according to DIN EN 1451-1 and DIN 4102-B2
  
• Approval number DIBt Z-42.1-366

• Made of EPDM
  
• For connecting SML, HT to fibre-reinforced cement pipes

• Made of EPDM
  
• For connecting SML, HT to fibre-reinforced cement pipes

• For fibre cement pipes
  
• Supplied complete with inserted rubber gasket
  
• For ground laying, do not install exposed in aggressive soils

- This product is regulated by Regulation (EU) 2019/1148. All suspicious transactions as well as the loss and theft of significant quantities must be reported to the responsible national contact point. ...

Delivery only in whole PUs ...