HT and PP accessories

• Hose sizes: 8-12 mm, 15-21 mm
  
• For washing machines and condensation dryers

• For subsequent connection to PVC pipes
  
• Cut the intake opening using a jigsaw or an angle grinder
  
• Material PVC-U

• Temperature resistance: +60°C
  
• Material: PVC

• Certification number: Z-42.1-394
  
• Material: PP

• Hose size ø: 8.5 - 26.5 mm

• Due to the massive increase in cross-section and the smooth inner surface, as well as the horizontal narrowing of the cross-section to the original cross-section at the top, the rat has no chance of climbing through to the top
  
• Only suitable for vertical installation
  
• No movable flaps
  

- This product is regulated by Regulation (EU) 2019/1148. All suspicious transactions as well as the loss and theft of significant quantities must be reported to the responsible national contact point. ...

• For retrofitting on downpipes
  
• Suitable for pip wall thickness to 5.5 mm (the safety set is no longer required)
  
• Approval number: Z-42.1-603
  

• DIN 4102-B2
  
• Material: PP
  
• With assembly aids
  The problem:
  It’s a problem we’ve all come across!
  You’re trying to install standard double sliding sleeves and can’t get a firm hold so you keep on slipping.
  The solution:
  The two stop fittings make it possible to apply a crowbar easily and slide the double sliding sleeve plus back onto the pipe end.

• Material: PP
  
• With assembly aids
  The problem:
  It’s a problem we’ve all come across!
  You’re trying to install standard double sliding sleeves and can’t get a firm hold so you keep on slipping.
  The solution:
  The two stop fittings make it possible to apply a crowbar easily and slide the double sliding sleeve plus back onto the pipe end.

• For retrospective attachment on all drainpipes DN 100/125 as a cleaning opening
  
• To be used inside and outside the building
  
• Seals water and gas-tight permanently
  

• DN 50 coupling side
  
• DN 50 - DN 40 tip
  
• Pressure resistant up to 0.5 bar
  

• Hose size: 19 - 21 mm

• Hose sizes: 8, 10, 13, 19 und 25 mm

• For retrofitting to all pipe types
  
• Incl. 2 stainless steel hose clamps

- Complete incl. holder and drill bit- For plastic and metal pipes- For metal pipes, set a low speed, add cutting oil and switch off the impact mechanism ...

- For subsequent connection to PVC pipes- Incl. 2 Cable ties- Material: PVC-U- Circle cutter ø 106 mm required (93 910 93) ...

• For plastic and metal
  
• ø 106 mm

• Hose size ø: 8, 10, 13 and 19 mm

• Hose size: 19 - 21 mm

• Hose sizes: 8-12 mm, 15-21 mm
  
• For washing machines and condensation dryers

• Hose sizes: 8-12 mm, 15-21 mm
  
• For washing machines and condensation dryers

• Connection: DN 40 fitting or plug end 40/32 and DN 25 (1”) ET
  
• Material: polypropylene

• Hose size: 19 - 21 mm

• consisting of:
  
• Hose bracket DN 50
  
• Hose nipple DN 50
  

• DN 50
  
• Extendable from 250 to 400 mm

• Suitable for hoses of ø 8-25 mm on both sides

• For subsequent connection to PVC pipes
  
• Cut the intake opening using a jigsaw or an angle grinder
  
• Material: PVC-U

• Suitable for permanently sealing drilled sewage pipes
  
• Suitable for all pipe materials
  
• For pipes DN 40, DN 50, DN 75, DN 90, DN 110 and DN 125
  

• Hose size ø: 8, 10, 13, 19, 25 and 32 mm

• Universal external thread DN 20 (3/4") to DN 32 (1 1/4")
  
• Hose size ø: 8, 10, 13, 19, 25 and 32 mm

• Hose size ø: 8, 10, 13 and 19 mm
  - PN 6

• Sealing of holes up to ø 25 mm possible
  
• For DN40 - ø 20 mm
  
• Suitable for permanent sealing of drilled drainage pipes