Floor-level shower elements
Multiple variants
Floor-level shower element
Immediately available
- With integrated slope of approx. 2%.
- Integrated horizontal floor drain DN 40 (barrier water height 20 mm) with plastic frame 130 x 130 x 8.5 mm, 360 degree rotatable incl. stainless steel grate 120 x 120 mm, drainage rate 33 l/min
- Floor collar wheelchair-accessible, tile size for wheelchair use ≥ 50 x 50 mm
Multiple variants
Floor-level shower element
Immediately available
- Flush-floor tileable shower element made of polystyrene foam
- With integrated slope of approx. 2%.
- Flush with floor and wheelchair-accessible, tile size for wheelchair use = 50 x 50 mm
Multiple variants
Floor drain DN50
Immediately available
- With odour trap and standard stainless steel grate 120 x 120 mm
- Water trap height 50 mm
- Connected load: 60 l/min
Multiple variants
Flush floor-mounted shower element, installation height from 45 mm – standard design
Immediately available
- Watertight, coated hard foam shower system that can be tiled, with integrated gradient of approx. 2.5%
- Centred fitting and sealed outlet plate
- Easy cleaning of the siphon
Multiple variants
Shower channel adapter
Immediately available
- For “Universal” shower element that is level with the floor (order no. 93 728 82)
- Dimensions 1200 x 200 x 70 mm
- For shower channel: 700-1000 mm
Multiple variants
Shower board, installation height from 40 mm
Immediately available
- Flush-to-floor tileable shower element made of polystyrene foam
- Horizontal drainage rate: 0.7 l/s
- Vertical drainage rate: 1.1 l/s
93 962 17
Bath sealing tape 5.0m for floor-level installation HydroDense 2.0
Immediately available
- Consisting of:
- 1x bath sealing tape 5.0 m
- 1x spacer tape, detachable adhesive 15x2 mm, 5.0 m