Machining

• For concrete, screed
  
• Inner hole ø (mm): 22.3

• Areas of application:
  - Fine grinding work in apparatus and container construction, machining of cast parts, moulds and Tools
  - Structuring, deburring, cleaning of metal, wood and plastic parts
  - Use on hand-held grinding machines
  
• Properties:
  - The flaps made of flexible abrasive cloth arranged radially around the plastic core allow optimum adaptation to the contours of the workpiece to be processed
  
• Note:
  - Coarse grit at high rpm has a finer effect, Fine grit at lower rpm has a coarser effect, observe permissible rpm

• Areas of application:
  - Pre- and post-processing of stainless steel and aluminium surfaces
  - Satin finishing and fine finishing of sheet steel, non-ferrous metals, wood and plastic parts
  
• Properties:
  - Abrasive fleece consists of non-woven nylon fibres in which the abrasive grain is evenly distributed
  - The elastic non-woven fabric adapts to any surface and enables consistent work results throughout the entire service life
  - Non-woven flap sanders are moisture-resistant and do not become clogged
  
• Note:
  - The sanding pattern can be noticeably changed by changing the rpm up to the permissible rpm and varying the contact pressure; observe the permissible rpm!

• Areas of application:
  - Universal for seamless, shadow-free surfaces on metal, wood or plastic
  - Pre- and post-processing of stainless steel and aluminium
  - Satin finishing and fine finishing of sheet steel, non-ferrous metals, wood and plastic
  - Rough, medium and fine sanding

- Areas of application:- Universal for seamless, shadow-free surfaces on metal, wood or plastic- Pre- and post-processing of stainless steel and aluminium- Satin finishing and fine finishing of sheet steel, non-ferrous metals, wood and plastic- Rough, medium and fine sanding ...

- Glass fibre support- Oblique mould- Zirconium aluminium oxide, polyester fabric- For hard use on sharp burrs and edges- Inner hole ø (mm): 22.23 ...

- Glass fibre support- Slanted mould- Special corundum, cotton fabric- With multiple embedded cooling layers- The Abrasive material does not clog and the sanding pattern remains free of discolouration or smearing- Inner hole ø (mm): 22.23 ...

- Glass fibre support- Oblique mould- Zirconium aluminium oxide, cotton fabric- Inner hole ø (mm): 22.23 ...

- Glass fibre support- Oblique mould- Zirconium aluminium oxide, cotton fabric- Inner hole ø (mm): 22.23 ...

• Areas of application:
  - Pre- and post-processing of stainless steel and aluminium surfaces
  - Satin finishing and fine finishing of sheet steel, non-ferrous metals, wood and plastic parts
  
• Properties:
  - Abrasive fleece consists of non-woven nylon fibres in which the abrasive grain is evenly distributed
  - The elastic non-woven fabric adapts to any surface and enables consistent work results throughout the entire service life
  - Non-woven flap sanders are moisture-resistant and do not become clogged
  
• Note:
  - The sanding pattern can be noticeably changed by changing the rpm up to the permissible rpm and varying the contact pressure; observe the permissible rpm!
  

• Areas of application:
  - Fine grinding work in apparatus and container construction, structuring, Deburrer, Cleaning of metal, wood and plastic surfaces
  - Especially for pre- and post-processing of stainless steel and aluminium surfaces
  - Use on hand sanding machines
  
• Properties:
  - Fastening via M 14 internal thread on commercially available, adjustable angle grinders
  - Quick tool change as no fastening tools are required
  - Flaps made of flexible abrasive cloth and fleece allow optimum adaptation, especially to contoured or curved surfaces
  
• Note:
  - Coarse grit at high rpm has a finer effect, fine grit at lower rpm has a coarser effect
  - The sanding pattern can be noticeably changed by changing the rpm up to the permissible rpm and varying the contact pressure; observe the permissible rpm!

• Application: for all ferrous and non-ferrous metals, soft and hard plastics, steel < 1,300 N/mm², stainless steel < 850 N/mm², grey cast iron, copper, brass, aluminium
  
• Shaft: 3-faced shaft
  
• Design: very effective cutting properties due to unevenly divided cutting edges
  5% cobalt-alloyed
  

• For removing paint, grinding and powerful texturing
  
• Removes scratches, rust, old paint, scale and burrs
  
• Deep cracks on stainless steel can be removed with grain size 40
  

• For cleaning, satin finishing and smoothing stainless steel, steel, copper, brass and aluminium
  
• Dimensions: ø 100 x 100 mm

• For effective surface work on stainless steel, copper, aluminium and brass
  
• Also for cleaning oxidised layers and smoothing plastics and wood
  
• Dimensions: ø 100 x 100 mm

• For preparing and re-polishing welded seams, de-scaling, removing rust, cleaning, removing paint residues, preparing painted surfaces, polishing stainless steel
  
• Internal hole ø: 22.23 mm

• For removing paint, rust, scale, stone, rust-proof steel, non-ferrous metals, aluminium, plastic, wood, pre/post-machining of welded seams
  
• Coarse fleece made of durable nylon filaments and coarse grain silicon carbide
  
• Easy, quiet working
  

• No geometric surface change
  
• Quick removal due to ceramic grain
  
• Cool surface treatment
  

• Dimensions: 915 x 100 mm

• For milling grooves and pockets in solid wood, plywood and coated boards
  
• Shaft ø (mm): 8.0

• Ideal for cutting continuous openings in wood
  
• Laminate dust and splinters can be very hazardous to the eyes and respiratory system, therefore please wear suitable protective equipment
  
• Shaft ø (mm): 8.0

• Ideal for elegant and smooth edges, and for manufacturing folding table tops
  
• You can also easily smooth corners and edges of furniture
  
• Shaft ø (mm): 8.0

• Area of application: non-ferrous metals, alloyed and unalloyed steel
  
• Shaft: cylindrical
  
• Design: with three 90° cuts
  

• Maximum comfort through 100% tool-free accessory change
  
• Acoustic click signal when correctly mounted
  
• Easy disassembly with X-Lock angle grinders. Just operate the lever and then the accessory part can be removed
  

• Maximum comfort through 100% tool-free accessory change
  
• Acoustic click signal when correctly mounted
  
• Easy disassembly with X-Lock angle grinders. Just operate the lever and then the accessory part can be removed
  

• Maximum comfort through 100% tool-free accessory change
  
• Acoustic click signal when correctly mounted
  
• Easy disassembly with X-Lock angle grinders. Just operate the lever and then the accessory part can be removed
  

• Maximum comfort through 100% tool-free accessory change
  
• Acoustic click signal when correctly mounted
  
• Easy disassembly with X-Lock angle grinders. Just operate the lever and then the accessory part can be removed
  

• Maximum comfort through 100% tool-free accessory change
  
• Acoustic click signal when correctly mounted
  
• Easy disassembly with X-Lock angle grinders. Just operate the lever and then the accessory part can be removed
  

• Rust-proof wire

• Corrugated
  
  
• With fixed mounted shaft
  
• For professional use
  

• For unalloyed steel
  
• Ceramic grinding granules
  
• Disc ø: 125 mm
  

• Material to be ground: stainless steel, steel
  
• Inner hole ø: 22.23 mm

• Material to be ground: stainless steel, steel
  
• Inner hole ø: 22.23 mm

• Material to be ground: stainless steel, steel
  
• Mounting: X-LOCK and inner hole ø: 22.23 mm
  
• Backwards compatible with standard angle grinders

• Area of application: carbon steel, tool steel, unalloyed and alloyed and hardened steel, cast steel, grey cast iron, white cast iron
  
• Suitable for machining blind holes and end faces on internal contours
  
• With face splines
  

• Area of application: carbon steel, tool steel, unalloyed and alloyed and hardened steel, case-hardened steel, cast steel
  6 teeth also suitable for nickel-base alloys, cobalt-base alloys, grey cast iron, white cast iron
  10 teeth also suitable for grey cast iron, white cast iron
  11 teeth also suitable for nickel-base alloys, cobalt-base alloys
  
• For surfaces, contours and radii
  
• With cross serration