Leak detection devices
- For detecting gas leaks, e.g. natural gas, methane, liquid gas, propane, butane
- Alarm signalling: Audible and visual
- Measuring range 0-10,000 ppm
- For detecting gas and refrigerant leaks (with optional Probe)
- With sensor exchange system
- With visual and acoustic signal when the gas concentration changes
- Interchangeable sensor for detecting gas leaks, e.g. natural gas, methane, LPG, propane, butane
- Suitable for leak detector Detect GS4
- Ref. no.: 611310 R
- Interchangeable sensor for locating refrigerants, e.g. R-22, R-32, R-134a, R-152a, R-290, R-404a, R-407c, R-410a, R-507a, R-600a, R-1234yf
- Suitable for leak detector Detect GS4
- Ref. no.: 611312 R
- Interchangeable sensor especially for the detection of ammonia
- Suitable for leakage detector Detect GS4
- Ref. no.: 611311 R
- Interchangeable sensor especially for detecting hydrogen
- Suitable for leakage detector Detect GS4
- Ref. no.: 611313 R
- For detecting natural gas-liquid and hydrogen leaks
- Measuring range: 0 to 9999 ppm / 0 to 2.5 vol.%
- Colour LC display
- For all common refrigerants
- Visual and audible alarm
- Detectable: CFC, HFC, HCFC, R11, R22, R32, R134a, R290, R410, R600, etc...
- For measuring the material thickness of metals, glass, plastics and other homogeneous materials
- Integrated calibration block for adjustment on site
- Incl. ISO calibration certificate
- For electrical function testing of a limit switch when installed, as well as for wet testing of a limit switch when removed
- Not suitable for hazardous areas
Technical data: - Ambient temperature range: 0-40°C
- For detecting gas leaks and flue gas backflow (with optional Probe)
- With sensor exchange system
- Illuminated TFT display with display in ppm/vol%
- For detecting leaks in natural gas and liquid gas systems
- Natural gas (methane)
Measuring range:
0 - 10,000 ppm CH4
0 - 1 vol% CH4 - Liquid gas (isobutane, isopropane and other hydrocarbons)
Measuring range:
0 - 20% LEL CH4 (20% UEG)
0 - 1,800 ppm LPG (iso C4H10
- For all common refrigerants
- Visual and audible alarm
- Simple sensor replacement
- Suitable for testo 316-3
- Ref. no.: 0554 2610
- Suitable for testo 316-3
- Ref. no.: 0554 2611
- For detecting leaks in natural gas, hydrogen and liquefied petroleum gas systems with explosion protection
- Measuring range: natural gas/liquid gas/hydrogen 1 ppm ... 2.5 vol. % CH4
- Resolution: 1 ppm / 0.1 vol. %
- Function display or error message via signal lights
- Not suitable for areas with potentially explosive atmospheres
2 x 9 volt blocks are required
- For all common refrigerants
- Visual and audible alarm
- Earphone connection
- For flammable gases, liquid gas, propane, natural gas, heating oil
- For checking the tightness of gas pipes or for leak detection
- Indicates the gas concentration acoustically (buzzer) and visually via 7-colour LEDs
- For the comprehensive functional testing of Safety devices limit value sensors (type B1 sensors) in accordance with EN 13616
- Displayed functions:
- State of charge of the built-in Batteries
- Heating up of the limit switch
- Short circuit
- Interruption
- Release
- Response time - Scope of delivery:
- Coupling socket, suitable for all limit value transmitter connection devices
- With transport case
- With Chargers
- For checking the seals of refrigeration systems or for detecting leaks
- Also suitable for R-32 gas
- Indication of gas concentration acoustically and via 7 colour LEDs
- Gases detected*: Methane, hydrogen, propane, ethylene, ethane, hexane, iso-butane, benzene, iso-butane, ethanol, acetaldehyde, toluene, P-xylene, methane, ammonia, hydrogen sulphide
- Detection range: 0-6400 ppm
- Alarm sensitivity: 40 ppm
- High sensitivity probe tip
- Simple determination of the refrigerant concentration
- Suitable for refrigerants: R22, R32, R134a, R407C, R404A, R507A, R410A
Technical data: