Measuring technology, general

• For all relevant tests in Gas and water installations according to TRGI 2018
  
• With test and pressure range up to 0.35 MPa/3.5 bar, with electronic pressure sensor up to 2.5 MPa/25 bar
  
• For battery and mains operation
  

• For testing 5-pin CEE plug sockets
  
• Simple and safe contacting without opening the CEE sockets
  
• Coloured test sockets with clear conductor assignment
  

• Load and leak test of natural gas pipes TRGI 2018
  
• Serviceability test at operating pressure 24, 50, 70 or 100 hPa with automatic test sequence. Determination in accordance with TRGI 2018 (no additional feed-in device required)
  
• Load and leak test of liquefied gas pipes TRF 2021
  

• With double ribbed foam inlay
  
• Durable hinges and closures
  
• Stackable
  

• On gas, water and waste water pipes
  
• Load test up to 1000 hPa
  
• Leak test with 150 hPa according to TRGI2018
  

• For pressure measurement, pressure loss measurement, leak and load testing
  
• Measuring devices (5000 mbar) with integrated barometric pressure sensor, removable pressure relief valve, SD card slot and micro SD memory card
  
• Voltage: lithium-ion battery 3.6 V / 1.8 Ah, mains adapter (mini-USB)
  

suitable for LM03/06, DPG02/07 Touch, PG 3R and PG Superkompakt ...

suitable for LM03/06, DPG02/07 Touch, PG 3R and PG Superkompakt ...

suitable for LM03/06, DPG02/07 Touch, PG 3R and PG Superkompakt ...

suitable for LM03/06, DPG02/07 Touch, PG 3R and PG Superkompakt ...

• For the early detection of excessive CO concentrations in the ambient air
  
• For use in boiler rooms, workshops, ductwork...
  
• Measuring range 0 ... 999 ppm CO
  

• For connecting testo 440 special heads
  
• Incl. 4 x AA batteries
  
• Dimensions: 165 x 50 x 40 mm
  

• Measurement range: 0 ... 30 m/s, -20 ... -70 °C
  
• Resolution: 0.01 m/s, 0.1°C
  
• Sensor ø: 9 mm
  

• Measurement range: 0.6 ... 60 m/s
  
• Resolution: 0.01 m/s
  
• Sensor ø: 16 mm
  

• Incl. temperature sensor
  
• For use with testo handle in conjunction with adapter 70 004 82
  
• ø: 100 mm
  

• For use with testo handle
  
• Measurement range: 0 - 500 ppm
  
• Probe length: 30 mm
  

• For testo 440 flow probes
  
• Extendable: 37.5 - 100 cm
  
• Ref. no.: 0554 0960
  

• For testo 440 and several sensors
  
• Dimensions: 516 x 135 x 256 mm
  
• Ref. no.: 0516 4401
  

• For load, leak and suitability tests in accordance with TRGI/TRF, as well as gas regulator and SAV tests
  
• Pressure and differential pressure measurements via two quick-action lock hose connections
  
• Temperature and differential pressure measurements via two model K bushings
  

• For leak testing on water pipes in conjunction with leak testing device DPM 9600
  
• Ref. no.: 63877

• Simulation of states of charge and for testing the effectiveness of protective measures
  
• 1- and 3-phase test adapter with type 2 plugs (length: 600 mm)
  
• Combination only possible with HT master models:
  - Combi G2 (order no.: 70 005 01)
  - Combi G3 (order no.: 70 005 02)
  

• For all tests on gas and water pipes
  
• Tightness of gas pipes (according to TRGI 2018 and DVGW G 5952)
  - Load and leak test
  - Serviceability test
  
• Tightness of liquid gas pipes (in accordance with TRF 2012)
  - Strength and leak test
  - Recurring tests
  

• VDE0100 / VDE0105 installation tester with auto-sequence function, including EVSE test sequence for charging stations
  
• AUTO sequence (Ra-> RCD-> Riso)
  
• Low-resistance measurement with >200 mA DC
  

• - fast and precise measurement of illuminance (lux) for all common light sources according to the V-lambda curve
  
• With Bluetooth und app connection
  
• Acoustic alarm sounds if the threshold is exceeded
  

• Protects the measuring device from impacts and dirt
  
• With mounting magnets and stand
  
• Suitable for testo Compact Class: 110/922/925 (from 2023)
  

• Protection class: IP67
  
• For measuring pH, conductivity, salinity, TDS, mV and Temperature
  
• Measuring range/resolution/accuracy:
  - Temperature: 0°C to +50°C/0.1/± 0.2°
  - pH: -2 to 16 pH/0.01 pH/± 0.01 pH
  - Conductance: from 0.01 microS - 200 milliS / Automatic Changeover switch ±1%
  - TDS: 0.1 ppm to 10 ppt//± 1% / ± 1%
  

• Electronic timer and stopwatch
  
• Setting: 1 sec. to 99 min.59 sec.
  
• LED warning light, changes from green to red when the time has elapsed
  

• Accessories for LM 06 TOUCH universal measuring instrument
  
• For leak testing water pipes (DIN EN 806-4) floor, Heating or solar pipes
  
• Pressure range 0.3 to 20 bar for air or water medium
  

• Can be used in conjunction with LM06 and DPG 02/07 TOUCH for leak testing on wastewater and sewer pipes for pipe diameters from 50 to 150 mm
  
• Test method according to DIN EN 1610 with the LC "air" method
  
• Test pressure = 100 hPa
  

suitable for LM03/06, DPG02/07 Touch, PG 3R and PG Superkompakt ...

suitable for LM03/06, DPG02/07 Touch, PG 3R and PG Superkompakt ...

suitable for LM03/06, DPG02/07 Touch, PG 3R and PG Superkompakt ...

suitable for LM03/06, DPG02/07 Touch, PG 3R and PG Superkompakt ...

suitable for LM03/06, DPG02/07 Touch, PG 3R and PG Superkompakt ...

suitable for LM03/06, DPG02/07 Touch, PG 3R and PG Superkompakt ...