REMS

• For all common pressfitting systems ø 10-108 mm
  
• 360° rotatable holder for standard Crimping tongs
  
• ACC: Automatic return after the pressing process has been completed (forced run-off)
  

• For all common pressfitting systems: ø 10 - 108 mm
  
• 360° rotatable holder for standard Crimping tongs
  
• ACC: Automatic return after the pressing process has been completed (forced run-off)
  

• For all common pressfitting systems: ø 10 - 40 mm
  
• 360° rotatable holder for Crimping tongs Mini
  
• Pressing in less than 4 seconds
  

• Suitable for all standard pressing machines from REMS and many other manufacturers
  Special versions:
  
• 4G: 4-segment pressing jaws (not suitable for steel pipes)
  
• PR-3 S: Press rings with 3 segments (intermediate pliers Z2 required)
  

- Suitable for REMS radial presses 32 kN (except Mini-Press)- For cutting threaded rods made of steel, stainless steel up to strength class 4.8 (400 N/mm2)- Reversible cutting inserts for double the service life* For manual drive using the REMS Eco-Press manual radial press ...

• Pressing pliers attachment can be rotated 360°
  
• For holding standard crimping pliers, press rings and press rings XL
  
• For all common press fitting systems: ø 10-108 mm, DN 10-DN 100 (3/8” - 4")
  

- Intermediate clamp Z6 XL or Z7 XL 45kN required for drive- With 3 press segments, 2 swivelling guided- For demanding pressings of large dimensions ...

• Suitable for:
  - Ax-Press H
  - Ax-Press 25 22 V ACC

- Suitable for REMS radial presses 32 kN (except Mini-Press)- In L-Boxx ...

• - Z5 intermediate pliers are required for the drive
  - With 3 pressing segments for demanding pressings of large dimensions
  
• Pressing profile VR for pressing fittings made of gunmetal (Sanpress XL)
  
• Pressing profile VFz for pressing fittings made of copper (Profipress XL, Profipress G XL), carbon steel (Prestabo XL) and stainless steel (Sanpress Inox XL, Sanpress Inox G XL)

• Press ring 180° for hard-to-reach places
  
• In sheet steel box
  
• Intermediate pliers Z8 included

• Press ring 180° for hard-to-reach places
  
• In sheet steel box
  
• Intermediate pliers Mini Z8 included

- Intermediate clamp Z8 or Mini Z8 required for drive- 180° swivelling- For pressing in hard-to-reach places ...

• For system (information without guarantee, see note below):
  
• T:
  - Tigris K1/M1
  - Tigris K5/M5
  
• U:
  - Uponor MLC
  

• For system (information without guarantee, see note below):
  
• T:
  - Tigris K1/M1
  - Tigris K5/M5
  
• U
  - Uponor MLC
  

- For all standard pressfitting systems: ø 10 - 108 mm- Rotatable holder for standard pressing tongs- Automatic locking of the press tongs- REMS Connected functionality e.g:- Logging of measurement/pressing data- Creation of logs with own company logo- Display of error messages- Configuration of th ...

• For all common pressfitting systems ø 10-108 mm
  
• 360° rotatable holder for standard Crimping tongs
  
• ACC: Automatic return after the pressing process has been completed (forced run-off)
  

• Only one Crimping tongs each for the dimensions 16-20-25-32-40 mm and 50-63-75 mm

for system:evenes Edelstahl Presssystem, AHLSELL, A-press, A-press rostfritt,AIRBEL SERTINOX, Aquatis XPress, BROEN, BALLOFIX PRES,SANHA-NiroSan Presssystem, EFFEBI EXPRESS,EUROTUBI INOX PRESSFITTING, FILPRESS Instalpress,Geberit Mapress, General Fittings, +GF+ Press Fit, +GF+ NiroSan,Cimberio Cimpr ...

für System: evenes Edelstahl Presssystem, AHLSELL A-press koppar, Aquatis XPress,BROEN BALLOFIX PRES, chronimo SANHA-NiroSan-Presssystem, Comap Sudopress Cu, EFFEBI EXPRESS, egeda Barinio, F.B.Q.BARONO BQpress, Frabopress +GF+ PRESS FIT, +GF+ NiroSan, Giacomo Cimberio Cimpress, GS Wärmesysteme Sys ...

For system (information without guarantee, see note below):A- AC-FIX H, PRESS-MULTI H (Global Piping Systems)- ACOME Acopex Alu- ALB Sistema Multicapa/Gas- AYOR SOMATHERM FOR YOU-1- AYOR SOMATHERM FOR YOU-2B- BAMPI BALPEX Series LP- BARBI EASYPRESS+(Industrial Blansol)- BARBI MULTIPLEX+(Industrial B ...

for system:Geberit Mepla. ...

for system:W+S Press, evenes Press, APE Raccordi a pressare, BAMPI BALPED, BAMPI BALPEX, Brasstech, Brasspress Aluplast, BUCCHI tech MP, ClouSet Press, Comap Multiskin Gas, Comap Sudopress Skin, Comap Sudopress Skin Gas, COMISA COMISA-PRESS, CosmoCONNECT, Dalpex LaserMultiDalpex, Dalpex LaserMultiIn ...

• Suitable for all standard pressing machines from REMS and many other manufacturers
  Special versions:
  
• 4G: 4-segment pressing jaws (not suitable for steel pipes)
  
• PR-3 S: Press rings with 3 segments (intermediate pliers Z2 required)
  

• Suitable for all standard pressing machines from REMS and many other manufacturers
  Special versions:
  
• 4G: 4-segment pressing jaws (not suitable for steel pipes)
  
• PR-3 S: Press rings with 3 segments (intermediate pliers Z2 required)
  

• Suitable for all standard pressing machines from REMS and many other manufacturers
  Special versions:
  
• 4G: 4-segment pressing jaws (not suitable for steel pipes)
  
• PR-3 S: Press rings with 3 segments (intermediate pliers Z2 required)
  

• PU = 1 pair

- For all common pressfitting systems: ø 10 - 40 mm- 360° rotatable holder for Mini crimping pliers- Pressing in less than 4 seconds- ACC: Automatic return after pressing process (forced run)- Integrated LED work light- 1 x rechargeable battery Li-Ion 14.4 V, 2.5 Ah- Quick charger- Weight with bat ...

- For all common pressfitting systems: ø 10 - 40 mm- 360° rotatable holder for Mini crimping pliers- Pressing in less than 4 seconds- ACC: Automatic return after pressing process (forced run)- Integrated LED work light- 1 x rechargeable battery Li-Ion 21.6 V, 2.5 Ah- Quick charger- Weight with bat ...

• Pressing pliers attachment can be rotated 360°
  
• For holding standard crimping tongs
  
• For all common press fitting systems: ø 10-108 mm
  

- For all common pressfitting systems ø 10-108 mm- 360° rotatable holder for standard crimping pliers- Acoustic signal after successful pressing process- The pressing tongs remain closed until the manual switchover to retraction- Integrated LED work light- 1 x rechargeable battery Li-Ion 14.4 V, 5 ...

- For all common pressfitting systems ø 10-108 mm- 360° rotatable holder for standard crimping pliers- ACC: Automatic return after pressing process (forced return)- Integrated LED work light- 1 x rechargeable battery Li-Ion 14.4 V, 5.0 Ah- Quick charger- Weight with battery: 4.3 kg ...

- For all common pressfitting systems: ø 10 - 108 mm- 360° rotatable holder for standard crimping pliers- ACC: Automatic return after pressing process (forced return)- Integrated LED work light- 1 x rechargeable battery Li-Ion 21.6 V, 2.5 Ah- Quick charger- Weight with battery: 3.2 kg ...

• Suitable for REMS Power-Press XL ACC
  
• For driving the REMS Press rings:
  - 64.0 - 108.0 XL (PR-3S)
  - 2 1/2" - 4" XL (PR-3S)

• Suitable for REMS Cordless press XL 45kN 22 V ACC
  
• For driving the REMS Press rings:
  - 64.0 - 108.0 XL (PR-3S)
  - 2 1/2" - 4" XL (PR-3S)
  - 2 1/2" - 4" XL (PR-3B)