Pressing jaws standard

• Suitable for all standard pressing machines from REMS and many other manufacturers
  Special versions:
  
• 4G: 4-segment pressing jaws (not suitable for steel pipes)
  
• PR-3 S: Press rings with 3 segments (intermediate pliers Z2 required)
  

- Suitable for REMS radial presses 32 kN (except Mini-Press)- For cutting threaded rods made of steel, stainless steel up to strength class 4.8 (400 N/mm2)- Reversible cutting inserts for double the service life* For manual drive using the REMS Eco-Press manual radial press ...

• Suitable for:
  - Ax-Press H
  - Ax-Press 25 22 V ACC

- Suitable for REMS radial presses 32 kN (except Mini-Press)- In L-Boxx ...

• - Z5 intermediate pliers are required for the drive
  - With 3 pressing segments for demanding pressings of large dimensions
  
• Pressing profile VR for pressing fittings made of gunmetal (Sanpress XL)
  
• Pressing profile VFz for pressing fittings made of copper (Profipress XL, Profipress G XL), carbon steel (Prestabo XL) and stainless steel (Sanpress Inox XL, Sanpress Inox G XL)

• Press ring 180° for hard-to-reach places
  
• In sheet steel box
  
• Intermediate pliers Z8 included

- Intermediate clamp Z8 or Mini Z8 required for drive- 180° swivelling- For pressing in hard-to-reach places ...

• For system (information without guarantee, see note below):
  
• T:
  - Tigris K1/M1
  - Tigris K5/M5
  
• U
  - Uponor MLC
  

• Only one Crimping tongs each for the dimensions 16-20-25-32-40 mm and 50-63-75 mm

• Suitable for all standard pressing machines from REMS and many other manufacturers
  Special versions:
  
• 4G: 4-segment pressing jaws (not suitable for steel pipes)
  
• PR-3 S: Press rings with 3 segments (intermediate pliers Z2 required)
  

• Suitable for all standard pressing machines from REMS and many other manufacturers
  Special versions:
  
• 4G: 4-segment pressing jaws (not suitable for steel pipes)
  
• PR-3 S: Press rings with 3 segments (intermediate pliers Z2 required)
  

• Suitable for all standard pressing machines from REMS and many other manufacturers
  Special versions:
  
• 4G: 4-segment pressing jaws (not suitable for steel pipes)
  
• PR-3 S: Press rings with 3 segments (intermediate pliers Z2 required)
  

• PU = 1 pair

• Suitable for REMS radial presses 32 kN (except Mini-Press)
  
• For driving the REMS Press rings:
  - 64.0 - 108.0 VFz (PR-3B)
  - 64.0 - 108.0 VR (PR-3B)

- Suitable for REMS radial presses 32 kN (except Mini-Press)- For driving the REMS press rings S (PR-2B) ...

- With plastic insert for REMS intermediate pliers Z8 Mini and intermediate pliers Z8 Standard as well as 14 stepless swivelling pressing rings V 12-35 180°, M 12-35 180° or TH 16-32 180°- Press rings/tongs are not included in the scope of delivery ...