AFRISO
- Content:
- 1 x Manometer 0-25 bar, DN 8 (1/4”) 63 ø
- 1 x Vacuummeter -1-0 bar, DN 8 (1/4”) 63 ø
- Max. operating temperature: 60°C
- Pressure range: 0-25 bar
- Class: 1.6
- Plastic housing
- Max. operating temperature: 60°C
- Class 2.5
- With Siku insert 50 µm
- With pressure gauge as service display (system pressure/filter change), rotatable
- Filter cup with emptying device
- As a universal replacement for existing discharge systems for
battery tanks up to 2m in height - Tank connection DN 40 (1 1/2“) including adapter pieces G2”,
M 60 x 4, S75 x 6, flange ø 68 mm - Safe protection against overfilling with monitoring of all tanks
- Consisting of:
- Isolating fittings
- Pressure gauge
- Hoses (approx. 60 cm)
- Connection: DN10 (3/8")
- Nozzle capacity: max. 100 l/h
- Return flow rate: max. 120 l/h
- Adjustable red marker
- Housing made of sheet steel, black
- Operating temperature: max. 80°C (briefly 120°C)
- For enclosed (pressure-resistant) hot water heaters up to 200 litres
- Combination fitting in straight-through form with safety valve, pressure gauge, shut-off device with non-return valve
- Material: Brass
- Plastic housing
- Max. operating temperature: 60°C
- Class 2.5
- ø 63 mm, with sheet steel housing
- Connection: axial, removable, DN 15 (1/2"), brass
- Display range: 0 - 120°C
- The firing controller controls the air supply for burning. The temperature in the heat generator is recorded via an integrated thermostat. The thermostat is connected to the supply air flap via a lever rod and a chain. The air supply is controlled independently of the boiler flow temperature by opening and closing the supply air flap.
- Operating temperature: max. 120 °C
- Ambient temperature: max. 60°C
- For installation in hot water tanks
- Housing made of galvanised sheet steel
- Axial connection
- Class I
- Suitable for dual-wall containers with fluid in the monitoring room, approved according to VBF
- For monitoring flammable fluids of hazard class AI, AII, AIII and B during aboveground storage
- Suitable for Afriso: Boiler safety group Mini
Heavy brass version in DN 10 (R 3/8")
- Working pressure up to max. 6.0 bar
- Test pressure: 10 bar
- for temperatures up to max. 110°C
- with automatic shut-off valve
- self-sealing
- With Siku insert 50 µm
- Connection: DN 10 (3/8”)
- Nozzle capacity: max. 100 l/h
- Plastic housing
- Max. operating temperature: 60°C
- Class 1.6
- Measurement range: 0–10 bar
- Operating temperature: max. 80°C (briefly 120°C)
- Housing made of sheet steel, black
- For enclosed (pressure-resistant) hot water heaters up to 200 litres
- Combination valve in straight form with safety valve, shut-off valve, non-return valve and testing screw
- Material: Brass
- axial
- Self-sealing
- Adjustable red marker
- Three-way insulating screw connection made of plastic (with thread bushings made of galvanised steel) for connecting the suction, return and measuring pipe (for pneumatic content measurement), non-return valve
- Connection for suction an return flow pipe: DN10 (3/8”), incl. universal screw connections for 8 mm and 10 mm CU pipes
- Connection for measurement pipe: Hose or pipe with 6 mm external diameter
- As a universal replacement for existing discharge systems for
battery tanks up to 2m in height - Tank connection DN 40 (1 1/2“) including adapter pieces G2”,
M 60 x 4, S75 x 6, flange ø 68 mm - Safe protection against overfilling with monitoring of all tanks