Airfit

• For rolling up or diverting underfloor heating pipes, cables and hoses
  
• Simply fit screw clamp to door or ceiling opening, insert underfloor heating pipe or cable and tighten up easily
  
• Length: 440 mm

• For wastewater pipes
  
• Approval number: Z-42.1-366

• Space-saving
  
• Waterproof min. 5 metres water column
  
• EPDM laminated seal tested according to DIN EN 681
  

• Certification number: Z-42.1-394
  
• Material: PP

• For wastewater pipes
  
• Approval number: Z-42.1-366

• Can be used to seal holes max. ø 25 mm
  
• For DN40 - ø 20 mm
  
• Suitable for permanently sealing bored drain pipes
  

• For retrofitting on cast iron cleaners for discharging waste water
  
• Flame retardant according to DIN 4102-B2
  
• Material: PP

• For HT pipes and wastewater pipes
  
• Tested according to DIN EN 1451-1 and DIN 4102-B2

• For HT pipes and wastewater pipes
  
• Tested according to DIN 4102-B2
  
• Approval number: Z-42.1-366

• DN 50
  
• Extendable from 250 to 400 mm

• Material: brass
  
• External diameter: 33 mm
  
• May be permanently installed
  

• Due to the massive increase in cross-section and the smooth inner surface, as well as the horizontal narrowing of the cross-section to the original cross-section at the top, the rat has no chance of climbing through to the top
  
• Only suitable for vertical installation
  
• No movable flaps
  

• For HT pipes and wastewater pipes
  
• Tested according to DIN EN 1451-1 and DIN 4102-B1

• For subsequent connection to PVC pipes
  
• Cut the intake opening using a jigsaw or an angle grinder
  
• Material PVC-U

• Hose size ø: 8, 10, 13 and 19 mm

• Hose sizes: 8-12 mm, 15-21 mm
  
• For washing machines and condensation dryers

• For plastic and metal
  
• ø 106 mm

• DIN 4102-B2
  The problem:
  It’s a problem we’ve all come across!
  You’re trying to install standard double sliding sleeves and can’t get a firm hold so you keep on slipping.
  
  The solution:
  The two stop fittings make it possible to apply a crowbar easily and slide the double sliding sleeve plus back onto the pipe end.

The problem:It’s a problem we’ve all come across!You’re trying to install standard double sliding sleeves and can’t get a firm hold so you keep on slipping.The solution:The two stop fittings make it possible to apply a crowbar easily and slide the double sliding sleeve plus back onto the pip ...

• Infinitely adjustable from 45-88°
  
• Material: PP

• Made of PP, fire behaviour: Tested
  according to DIN 4102-B2, EN 13501-1-E, EN 11925-2
  
• Circle cutter ø 121 mm required

• Hose size ø: 8, 10, 13, 19, 25 and 32 mm

• Hose sizes: 8-12 mm, 15-21 mm
  
• For washing machines and condensation dryers

• For retrospective attachment on all drainpipes DN 100/125 as a cleaning opening
  
• To be used inside and outside the building
  
• Seals water and gas-tight permanently