DeWalt
70 000 88
Crossline laser DeWALT DCE089D1G 12V with 2.0 Ah battery and Chargers, with green laser
Immediately available
- High degree of working efficiency due to 3 x 360° lines: horizontal and vertical levelling work can be carried out in the whole room simultaneously using just one tool
- Protection type: IP 65
- Laser diode (Nm): 515
72 001 86
Replacement filter DeWALT DWV9340-XJ for Wet and dry vacuum cleaners M-Class, PU=2 pieces
Only a few items left in stock
- Suitable for wet and dry vacuum cleaner, M-class (72 001 39)
- PU = 2 units
80 234 69
Battery starter set DeWalt DCB1104D2-QW 18V with 2x 2.0 Ah batteries XR and quick charger
Only a few items left in stock
- Battery/set: 2- Battery voltage (V): 18- Battery capacity (Ah): 2- Charger/set: 1- Charging current (A): 4- Charging time (100% at 2.0 Ah) min.: 30 ...
80 232 25
Cordless sets DCB1104P3-QW 18 V with 3x 5 Ah Batteries and chargers
Immediately available
- Battery/set: 3- Battery voltage (V): 18- Battery capacity (Ah): 5- Charger/set: 1- Charging current (A): 4- Charging time (100% at 5.0 Ah) min.: 70 ...
80 234 77
Battery Starter Set DeWalt DCB1104H2-QW 18V with 2 x 5.0 Ah batteries Powerstack and quick charger
Immediately available
- Battery/set: 2- Battery voltage (V): 18- Battery capacity (Ah): 5- Charger/set: 1- Charging current (A): 4- Charging time (100% at 5.0 Ah) min.: 7018 V XR POWERSTACK- Suitable for all battery tools from the DeWALT 18 Volt XR battery range- Rechargeable with all DeWALT XR system quick chargers- Mor ...
80 234 76
Battery starter set DeWalt DCB1104P2-QW 18V with 2 x 5.0 Ah batteries XR and quick charger
Immediately available
- Battery/set: 2- Battery voltage (V): 18- Battery capacity (Ah): 5- Charger/set: 1- Charging current (A): 4- Charging time (100% at 5.0 Ah) min.: 70 ...
80 234 75
DeWalt DCB1104-QW quick charger 10.8 - 54.0 V, 1.3 - 12.0 Ah
Immediately available
- Battery charging voltage (V): 18/54- Battery capacity (Ah): 1.3-12.0- Charging current (A): 4- Charging time with 4 A (min.): - 2 Ah = 30 - 4 Ah = 60 - 5 Ah = 70 - 6 Ah = 90 - 9 Ah = 135 - 12 Ah = 180- State of charge indicator: Yes ...
80 025 31
Battery Lawn Trimmer DeWalt 54V DCM571N without battery and charger
Immediately available
- Battery capacity (Ah): 6.0 + 9.0
- Idle speed (rpm): 0-6600
- Length (m): 1.8
80 027 68
DeWalt complete replacement coil incl. 7.5m trimmer cord
Immediately available
- Complete incl. trimmer cord ø 2.0 mm x 7.5 m
Multiple variants
Cordless sabre saws and special saws DCS312, 12 V with transport case
Immediately available
- Battery capacity (Ah): 2.0-3.0
- Idle stroke rate (rpm): 0-2800
- Stroke rate control: yes
80 062 49
DeWALT DWS520KTR plunge-cut circular saw, 1300 W incl. guide rail
Only a few items left in stock
- Output (watts): 1300
- Nominal voltage (V): 230
- Idle speed (rpm): 1750-4000
80 062 38
DeWALT DW292 impact wrench, 710 W with 1/2" square drive
Only a few items left in stock
- Output (watts): 710
- Torque (Nm) max.: 440
- Idle stroke rate (rpm): 2700
80 062 50
DeWALT D27113 mitre saw, 1600 W
Only a few items left in stock
- Output (watts): 1600
- Nominal voltage (V): 230
- Idle speed (rpm): 3300
84 004 98
Diamond cutting disc DeWALT DT40257-QZ, Ø350x3.3x25.4mm
Immediately available
- For steel, stainless steel, cast iron, reinforcing iron, sheet metal and non-ferrous metals
- Cutting edge: segmented
- Internal hole ø (mm): 25.4
84 004 97
Diamond cutting disc DeWALT DT40213-QZ, Ø350x25.4mm
Immediately available
- For brick, reinforced concrete, screed, natural and artificial stone
- Cutting edge: segmented
- Internal hole ø (mm): 25.4
80 835 65
Universal subframe DE 7023 for all panel saws
Delivery item
- Suitable for all DeWalt cap, mitre and panel saws and other brand manufacturers
- Pull-out supports for a maximum working length of 3.85 m
- Max. load capacity: 225 kg
Multiple variants
Cordless hammer and chisel hammer DCH273, 18 V with transport case
Immediately available
- Battery capacity (Ah): 1.5-5.0
- Idle speed (rpm): 0-1100
- Stroke rate (rpm): 0 - 4600
Multiple variants
Akku-Kreuzlinien-Laser 12/18 V DCE088
Currently not in stock
- Each with a horizontal and vertical laser line
- Protection type: IP 54
- Laser diode (Nm): 510-530
Multiple variants
Circular saw blade for construction, ø 216 x 30 mm
Immediately available
- For wood, composite material
- Nail resistant for the toughest requirements
- Suitable machines: Cap and mitre saws and panel saws
Multiple variants
Circular saw blade DeWalt Ø165x20
Immediately available
- For hard wood, MDF, plywood, laminate and aluminium
- Suitable machines: plunge-cut circular saws
80 070 40
Circular saw blade DeWalt Ø165x20x1.6mm with 4 teeth
Immediately available
- For softwood and hardwood, fibreboard, plywood and chipboard, laminate and melamine surfaces and glass-fibre reinforced plastics
- Suitable machines: plunge-cut circular saws
84 004 00
Diamond cup wheel DeWalt Single D=125mm
Immediately available
- Suitable for fast surface processing and high material removal rate with brick, masonry and concrete
84 004 28
Diamond cup wheel DeWalt Turbo D=125mm
Immediately available
- Suitable for finishing concrete surfaces
80 863 28
Dewalt cutter set, 12-piece for 80 835 67
Immediately available
- 8 mm shaft (suitable for order no. 80 835 67)
- 12-piece set in plastic box consisting of:
- Revelling cutter: ø =12 mm, radius = 6 mm
- V-groove milling cutter: ø =12.7 mm, 90°
- Tine milling cutter: ø =14.3 mm, 14°
- Fluted end mill with ball bearing: ø = 21.5 mm, radius = 6 mm
- Profile milling cutter with ball bearing: ø = 27 mm, radius = 4 mm
- Chamfer milling cutter with thrust ball bearing: ø = 28.6 mm, 45°
- Grooving cutter: ø = 8,12,16 mm, working length 20 mm
- Flush milling cutter with thrust ball bearing: ø = 12.7 mm, working length 25.4 mm
- Rounding cutter with thrust ball bearing: ø = 24.7 mm, radius = 6 mm
- Rounding cutter with thrust ball bearing: ø = 32.7 mm, radius = 10 mm