ewo

• Range: 20 bar
  
• Connections:
  - Input: Bottle W24 x DN 32 (1/1/4”) - Output: DN 8 (1/4”) x LW6
  
• DIN EN / ISO 2503 (previously DIN EN 585)
  

• Range: 10 bar
  
• Connections:
  - Input DN 20 (3/4“) i
  - Output DN 8 (1/4“) x LW6
  
• DIN EN ISO 2503 (previously DIN EN 585)
  

• Individual components of industry standard in accordance with DIN ISO 2503
  
• For welding 0.5-9 mm
  
• Cutting 3-100 mm
  

• Made of brass
  
• With connection couplings

• Made of brass
  
• With connection couplings

• With 17 mm shaft (standard torch)
  
• Lever cutting insert with block nozzles
  
• Welding 0.5-14 mm
  

• Round with shut-off valve
  
• Connections: DN (3/8“) LH

• Made of brass
  
• With connection couplings

• Operating pressure: max. 16 bar
  
• Temperature range: -20 to +100°C
  
• The coupling is vented by pressing the pushbutton once. When you press it a second time, the plug is unlocked and can be harmlessly removed
  

• For mounting on lever and torque plug

• Needle sizes: ø 0.5 mm - 1.2 mm with ribbing
  
• Needle length: approx. 90 mm

• For MIG/MAG welding
  
• With 2 manometers
  
• 20 litres / min
  

• Removes 99.999% of the smallest particles from water, oil and dirt, leaving almost no residue (at 0.01 µm)
  
• With borosilicate microfibre fleece
  
• Max. pre-compression: 16 bar
  

• Diaphragm pressure regulator, self-venting
  
• Regulates the fluctuating mains pressure (input pressure)
  
• Almost entirely independent of admission pressure
  

• Combines the functions of a filter and a pressure regulator
  
• Control range: 0.5–10 bar
  
• Filter: 40 µm
  

• Plug nipple: NW 7.2
  
• Hose connection (mm): -
  
• Connection thread nozzle: -
  

- Plug nipple: -- Hose connection (mm): 9- Nozzles connection thread: M12 x 1.25- Material: Aluminium- Pressure (bar) max.: 8- Weight (kg): 0.3 ...

• Save-saving combination
  
• Consisting of filter and pressure regulator
  
• Max. operating pressure: 16 bar
  

• Reliably prevent bending, crushing and torsional stresses
  
• Increased flexibility even for percussive tools such as compressed air screwdrivers or compressed air nailers
  
• NW 7.2
  

• Fittings: No
  
• Threaded connection: DN 10 (3/8”), IT
  
• Temperature range (°C): from -50 to + 90
  

• With 17 mm shaft (standard torch)
  
• Blade cutting insert with block nozzles
  
• Pipe welding insert size 3+4
  

• Plug nipple: NW 7.2
  
• Operating pressure (bar) max.: 10
  
• Operating temperature (°C): -10 to + 50
  

- Hose length 500 mm- Hose connection thread DN 8 (1/4") ...