Fischer

• Plastic nail plug
  
• ø= 6 mm
  
• Drive: PZ 2
  

• Made of plastic
  
• Halogen-free and flame-retardant
  
• For fixing conduits in concrete, brick, solid lightweight concrete, natural stone, solid sand-lime brick
  

• FCN Clix P is suitable for connecting FUS rails and attachments
  
• FCN Clix P is suitable for connecting clamps to a threaded rod
  
• Easy and precise positioning on the rail
  

• The tilting element of the dowel opens automatically behind the plate and provides its load capacity
  
• It functions like an expansion plug for drill hole strikes in solid materials such as concrete or wood
  
• Especially suitable for shallow cavities
  

- Pre- and feed-through mounting- When the specified torque is reached, the anchor is set in accordance with the approval- Expanding clip: Cone bolt is pulled into the expansion clip and clamped. Hexagon offers very high force transmission, cap nut protects against rust, for example- Application: St ...

• Galvanised steel
  
• Quality 8.8
  
• For removable fixings in concrete
  

• Thread ø d1: 3.5 mm
  
• Head ø: 7.0 mm
  
• Blade size: T10
  

• Thread ø d1: 3.5 mm
  
• Head ø: 7.0 mm
  
• Blade size: T20
  

• Hole ø: 10 mm
  
• Drive: T40
  
• With countersunk head screw: whenever flush countersinking of the head is required
  

• Hole ø: 10 mm
  
• Drive: T40
  
• Spanner size: 13
  

• Cylinder head: small head diameter for special applications such as screw-fitting planks
  
• Full thread: withstands high tensile forces, high contact pressure
  
• Galvanised, blue passivated: for indoor and outdoor use without exposure to direct weathering but not a substitute for stainless steel
  

• Thread ø d1: 7.00 mm
  
• Blade size: SW13
  
• Galvanised
  

• Length: 40 mm
  
• Application: Reduce the diameter of a mount
  
• Electrogalvanised: For indoor and outdoor applications without weathering

• Galvanised
  
• Material: Malleable cast iron
  
• Hole ø (A): 12 mm

- Suitable for feed-through mounting and through mounting- When the specified torque is reached, the anchor is set in accordance with the approval- Area of application: Cracked and non-cracked concrete B25 to B55 or C20/25 to C50/60, concrete B15 and natural stone with dense structure- Expanding cli ...

• Thread ø d1: 7.00 mm
  
• Blade size: SW13
  
• Stainless steel A4
  

- Suitable for pre-stretching/feed-through mounting- Area of application: Cracked and non-cracked concrete B25 to B55 or C20/25 to C50/60. Also suitable for concrete B15 and natural stone with dense structure- Application: Fastening steel structures, brackets, railings, cable trays, ladders, stairs ...

• Thread: M16
  
• Drive: SW 24
  
• For pre-stretching/feed-through mounting
  

• Independent retightening under load
  
• Spreading clip: Cone bolt is pulled into the spreading clip and tensioned.
  
• Area of application: Cracked concrete C12/15 to C50/60, also in the tensile area, natural stone with dense structure, solid sand-lime brick, prestressed concrete hollow slab floors
  

• Long expansion zone with 90 mm anchoring depth for maximum loads in aerated concrete
  
• Second expansion zone and 70 mm anchoring depth for solid and perforated building materials
  
• Application: Façade, ceiling and roof constructions made of wood or metal, gates, doors, metal angles, etc.
  

• Enables expanding in solid building materials or knotting in all cavities
  
• Full expansion: Knotted / expanded, with connecting webs
  
• Area of application: Concrete, solid sand-lime brick, vertically perforated brick, plasterboard and gypsum fibre boards, prestressed concrete and hollow ceiling slabs, solid brick made of lightweight concrete, perforated sand-lime brick, chipboard, natural stone with dense structure, aerated concrete, hollow block made of lightweight concrete, solid brick, solid plasterboard, hollow ceilings made of brick, concrete or similar.
  

• Long expansion zone with 90 mm anchoring depth for maximum loads in aerated concrete
  
• Second expansion zone and 70 mm anchoring depth for solid and perforated building materials
  
• Application: Façade, ceiling and roof constructions made of wood or metal, gates, doors, metal angles, etc.
  

- Suitable for feed-through mounting and through mounting- When the specified torque is reached, the anchor is set in accordance with the approval- Area of application: Cracked and non-cracked concrete B25 to B55 or C20/25 to C50/60, concrete B15 and natural stone with dense structure- Expanding cli ...

• For fitting FBX breeze block anchors