Fischer

• - Suitable for pre-stretching/feed-through mounting
  - Area of application: Cracked and non-cracked concrete B25 to B55 or C20/25 to C50/60. Also suitable for concrete B15 and natural stone with dense structure
  - Application: Fastening steel structures, brackets, railings, cable trays, ladders, stairs, machines, façades, gates, timber structures
  - When the hexagonal nut is tightened, the conical bolt is pulled into the expansion clip and braces it against the wall of the drill hole
  - Ensures even load distribution
  - The reduced drill hole depth enables even faster installation and reduces the number of reinforcement hits
  - Can be used up to a mounting part thickness of 20 mm
  
• Slice according to timber construction standard DIN 1052

• Tilting beams independently lock into cavities
  
• Long threaded rods bridge large wall thicknesses
  Suitable for:
  
• Pre-stressed hollow concrete slabs
  

- Pre- and feed-through mounting- When the specified torque is reached, the anchor is set in accordance with the approval- Expanding clip: Cone bolt is pulled into the expansion clip and clamped. Hexagon offers very high force transmission during screw connection- Application: Balcony railings, stee ...

• With sealing disc and stainless
  steel nail screw
  
• Drill ø: 6 mm
  
• Min. anchorage depth: 30 mm
  

• Long expansion zone with 90 mm anchoring depth for maximum loads in aerated concrete
  
• Second expansion zone and 70 mm anchoring depth for solid and perforated building materials
  
• Application: Façade, ceiling and roof constructions made of wood or metal, gates, doors, metal angles, etc.
  

• Galvanised steel

• Quick-release bracket
  
• Pre-assembled combination screw with slotted and cross-slotted receptacle
  
• Suitable for: fischer Nail anchor FNA II (order no.: 94 012 37) or Nail plug N 6. (order no.: 94 012 25)
  

• Compatible with SolarFish H33, H44, H83 rails
  
• Pre-assembled, no additional Screws required
  
• Multiple adjustment elements:
  - The lower one allows adjustment to the tile thickness
  - The vertical adjustment element at the top allows the distance between the profile and the top of the tile to be adjusted
  - The upper adjustment option allows the rail to be aligned parallel to the eaves
  

• With pre-mounted EPDM seal sets, 2 mm thick
  
• Application: Fastening PV modules in landscape format on trapezoidal sheet metal roofing
  
• Aluminium: Lightweight, resistant to UV radiation, moisture and temperature fluctuations

• Shank ø: 3.0 mm
  
• Suitable for: Fischer Cordless nail gun FGC 100 (80 221 66)
  
• Magazined
  

• Shank ø: 2.6 mm
  
• Suitable for: Fischer Cordless nail gun FGC 100 (80 221 66)
  
• Magazined
  

• Thread ø: 6.0 mm
  
• Head ø: 14.5 mm
  
• Drive: T30
  

• Compatible with all AMPShare 18V systems
  
• Charging time (min.):
  - 2.0 Ah = 35
  - 4.0 Ah = 65
  - 5.0 Ah = 70
  - 4.0 Ah ProCORE = 65
  - 8.0 Ah ProCORE = 124
  - 12.0 Ah ProCORE = 172
  
• With charge level indicator

• Suitable for: Fischer FGC 100 cordless nail gun (80 221 66)
  
• Magazined
  
• Application: steel, hard concrete ≥ C30/37
  

• Drive: TX 25
  
• Galvanised
  
• Stepless and precise adjustment of the attachment
  

• Thread ø d1: 3.0 mm
  
• Head ø: 6.0 mm
  
• Blade size: T10
  

• Magazined
  
• Thread ø: 3.9 mm
  
• Head ø: 8.3 mm
  

• Thread ø: 3.5 mm
  
• Head ø: 7.0 m
  
• Drive: T10
  

• Thread ø: 3.5 mm
  
• Head ø: 7.0 mm
  
• Drive: T10
  

• Cylinder head: small head diameter for special applications such as screw-fitting planks
  
• Full thread: withstands high tensile forces, high contact pressure
  
• Galvanised, blue passivated: for indoor and outdoor use without exposure to direct weathering but not a substitute for stainless steel
  

• Thread ø: 3.5 mm
  
• Blade size: T20
  
• Head ø: 7.0 mm
  

• Thread: M8
  
• Drive: SW 13
  
• Length: 16 mm
  

• Profile connector for connecting two solar rails
  
• Relief pin clearly indicates the correct positioning within the rail
  
• Self-tapping screw (94 097 01) must be ordered separately for connection
  

• Thread ø: 3.9 mm
  
• Head ø: 8.3 mm
  
• Blade size: PH2