Fischer

- Suitable for feed-through mounting and through mounting- When the specified torque is reached, the anchor is set in accordance with the approval- Expanding clip: Cone bolt is pulled into the expansion clip and clamped. Hexagon offers very high force transmission during screw connection- Applicatio ...

• Galvanised: For indoor and outdoor use without exposure to direct weathering but not a substitute for stainless steel
  - Easy creation of rail constructions in connection with Fischer rails FUS (94 106 08) and PFCN 41 (94 163 87)

• Thread ø: 4.5 mm
  
• Blade size: T20
  
• Head ø: 9.0 mm
  

• DuoLine - Wall plugs with multi-component technology
  
• DuoPower - expands, folds or knots
  
• DuoTec - nylon toggle plug for high loads in all panelled building materials
  

• Thread ø: 10.0 mm
  
• Head ø: 22.0 mm
  
• Drive: T40
  

Beam clamps: 30 pieces- Clamping range [mm]: 0-18- Breaking load [N]: 1200- VdS approval- Application: Simple attachment of clamps to steel beams- Application: Fastening of pipework, ventilation ducts and sprinkler pipes- Galvanised: For indoor and outdoor applications without direct weathering, but ...

• Length: 40 mm
  
• Application: Reduce the diameter of a mount
  
• Electrogalvanised: For indoor and outdoor applications without weathering

• One-piece
  
• Quick-release fastener
  
• For Fastening Plastic and Metal Composite Pipes in the Plumbing and Heating Sector
  

• Countersunk head: Universal application in solid building materials and timber constructions, whenever it is necessary to countersink the head flush with the surface
  
• Fixing thread: Secure fit of the wooden decking on the substructure, guaranteeing a safe and permanent connection of two pieces of wood without creaking
  
• Galvanised: for indoor and outdoor use without exposure to direct weathering but not a substitute for stainless steel
  

• Drive: Torx
  
• Ideal fit in DIN Screws
  
• Optimum torque transmission
  

• For fastening mounting rails and fastening parts to mounting rails
  
• For securing connections
  
• Prevents the rail from bending upwards
  

• Stainless steel A4: For indoor and outdoor applications with direct weathering
  
• Simple construction of rail structures in conjunction with Fischer rails FUS (94 105 09) and PFCN 41 (94 163 88)

• Increased thread pitch of the screw reduces the screwing-in time
  
• Screw tip with three ribs provides quick bite and pre-cutting
  
• Shaft milling ribs combined with the core cutter geometry reduce the screw-in resistance
  

• One-component hybrid sealant that reacts with atmospheric moisture with virtually no shrinkage and absolutely bubble-free
  
• High stretchability
  
• For a wide variety of substrates, also for moist
  

• High load-bearing spacer mounting system
  
• Self-tapping, glass-fibre reinforced cone cuts directly through the plaster into the insulation material during installation
  
• Thermal separation
  

• Stainless steel A4: For indoor and outdoor use exposed to direct weathering in coastal areas as well as for use in damp rooms (e.g. kitchen and bathroom)
  - Easy creation of rail constructions in connection with Fischer rails FUS (94 105 09) and PFCN 41 (94 163 88)

• Material: steel
  
• Sound insulation part connected
  
• Sound insulation DIN 4109
  

• Application: Quick setting of the cavity metal dowels by pre-spreading and locking the claws in the panel building material
  
• Ergonomic handles for fatigue-free working
  - Sturdy, heavy-duty design
  - Transport bracing through bow-shaped tab

• Galvanised
  
• Simple construction of rail structures in conjunction with Fischer rails FUS (94 106 08) and FCN Clix P (94 026 37)

• Suitable for: Fischer FGC 100 cordless nail gun (80 221 66)
  
• Magazined
  
• Application: solid stone, sand lime brick, soft concrete < C30/37
  

• Material: steel
  
• Sound insulation part connected
  
• Sound insulation DIN 4109
  

• Hot-dip galvanised: For indoor and outdoor use without exposure to direct weathering but not a substitute for stainless steel
  
• Simple construction of rail structures in conjunction with Fischer rails FUS (94 105 09) and FCN Clix P (94 026 33)

• Thread ø d1: 4.5 mm
  
• Blade size: T20
  
• Head ø: 6.9 mm
  

• For unhitching pipes, light bands and ventilation pipes, as well as many other applications:
  
• The carrier clamp only will only safely penetrate the steel girder if it is knocked in
  
• Screws for fixing the carrier clamps are not required