Helios
Multiple variants
Small room fan MiniVent M1 100 (V = to 90 m³/h)
Immediately available
- Area of application
- For bathroom, toilet, storeroom, cellar, etc.
- Ventilation of internal rooms
Multiple variants
Fan unit model ELS (V = up to 100 m³/h)
Immediately available
- Area of application:
- Bathroom, lavatory, domestic kitchens, stockrooms and storage rooms in private and public residential units, hotels or other buildings according to DIN 18017-3
- Installation position: ceiling / wall
Multiple variants
Flush-mounted Helios housing, model ELS-GU
Immediately available
- For one and two-room ventilation
- Connection: 80 mm
- Suitable for blower unit ELS + ELS-EC
Multiple variants
Pipe fan InlineVent® RR and RRK (V = up to 1260 m³/h)
Immediately available
- Design: Radial
- Extracted volume: 175-1260 m³/h
- Acoustic pressure: 36 dB (A)
Multiple variants
Ventilation grille
Immediately available
- For prefixing on ventilation openings in the ceiling and wall
- Flat design, simple fastening by anchoring
- Made of high-quality, UV and break-resistant plastic.
Multiple variants
Pipe fan MultiVent® MV (V = up to 930 m³/h)
Immediately available
- Design: semi-axial
- Extracted volume: 190-910 m³/h
- Acoustic pressure: 34/38 dB (A)
Multiple variants
Fan units type ELS-NFC (V = up to 100 m³/h) for flush-mounted housing, parameterisable via app
Immediately available
- EC technology, particularly economical in consumption
- Facade with filter inserts
- Voltage: 230V, 50 Hz
Multiple variants
Small room fan HV 100 (V = 95 m3/h)
Immediately available
- Can be used universally to ventilate bathrooms, toilets and other rooms up to 25 m²
- A mounting flange (order no. 98 014 15) is required for ceiling installation
- Connection: 100 mm ø
Multiple variants
Plastic disc valves KTV for exhaust air
Immediately available
- Made from impact-resistant plastic
- Flow rate adjustment via rotatable valve disc
- For use in areas without special Fire protection requirements
Multiple variants
Helios (Small room fans) MiniVent M1/100 black
Immediately available
- Area of application
- For bathroom, toilet, storeroom, cellar, etc.
- Ventilation of internal rooms
Multiple variants
Cover flaps VK
Immediately available
- Self-actuating overpressure flaps for external closure of flue gas openings
- Made of break-resistant UV-resistant plastic
- Colour white
Multiple variants
Check valves RSK
Immediately available
- Automatic cover flap for insertion into the pipe run
- Made of break-resistant plastic
- Length: 57 mm
98 022 89
Helios SlimVent SVS 125 B Flat radial pipe fan 230 V 50 Hz, capacitor IP 44
Immediately available
- Flow rate from 245 to 840 mm
- Flat radial fan with 2 fixed output levels or speed control by means of ESU 1 electronic actuator or 2 DS 2/2 level switches
- With 50 mm thick fibreglass panel
98 029 86
Device unit with internal panel type EcoVent Verso KWL EC 45-160
Immediately available
- Extracted volume: 14/24/32/37/45 m³/h
- Voltage: 12 V DC
- Protection type: IP 20
Multiple variants
Plastic ventilation pipe DN 100
Immediately available
- Highly flexible
- Nominal diameter ø: 100 mm
- For a wide range of applications in residential and commercial areas
Multiple variants
Deflector channel/round 90°
Immediately available
- Dimensions: 100 mm ø to 110 x 55 mm
Multiple variants
Flexible aluminium pipe with spring spiral
Immediately available
- Length 10 m (compressed to 600 mm)
- Fully flexible ventilation tube with two-ply polyester film, aluminium-coated
- Embedded spring spiral for stiffening
Multiple variants
Ventilation grille
Immediately available
- For covering and insertion into round ventilation openings
- Simple external or internal mounting via a rear insertion connector with a conical run
- Made of high-quality, break-resistant white plastic
98 029 77
Helios speed controller Model DS 2/2, 2-step switch, 400 V
Immediately available
- To control alternating current fans with 2 rotational speed levels
- With 0 position
- For flush or surface-mounted gas meters
98 006 11
Wall mounting set WES 90
Immediately available
- For flush-mounting of M1 models
- Adjustable from 260 to 500 mm
- External closure via automatic damper or fixed baffle
Multiple variants
Flat trunking with 1 socket FL
Immediately available
- Well-established, easy-to-lay plug-in system
- Universal application
Multiple variants
Slot-in pipe ventilator
Immediately available
- Universal use, for installation in pipe systems
- Design: axial
- Flow rate: 105 m³/h
Multiple variants
Mounting flange L-MF 100
Immediately available
- For effortless installation of HV 100 fans in connection with:
- ceiling installation
- inconvenient wall protrusion
- narrow shafts
- thin walls - Can be stacked as required
Multiple variants
Hose clamp S 100
Only a few items left in stock
- For secure connection of hoses
- Metal band with turnbuckle
- Nominal ø: 100 mm
