Kipp

• For safe holding and closing of flaps, container covers, machine linings, etc.
  
• Vibration-proof stop due to dead centre
  
• Screw-on or rivet
  

- Temperature range: -30 °C to +80 °C- Elastomer Natural rubber- Strength class 5.6- Based on natural rubber- Hardness group approx. 55 Shore- Galvanised: For indoor and outdoor applications without direct weathering, but no substitute for stainless steel.- Application: For vibration and structure ...

- Temperature range: -30 °C to +80 °C- Elastomer Natural rubber- Strength class 5.6- Based on natural rubber- Hardness group approx. 55 Shore- Galvanised: For indoor and outdoor applications without direct weathering, but no substitute for stainless steel.- Application: For vibration and structure ...

- Temperature range: -30 °C to +80 °C- Elastomer Natural rubber- Strength class 5.6- Based on natural rubber- Hardness group approx. 55 Shore- Galvanised: For indoor and outdoor applications without direct weathering, but no substitute for stainless steel.- Application: For vibration and structure ...

• thermoplastic glass-fibre reinforced
  
• Black hinge
  
• Bare Nirosta axis
  Important: You will need to know which side of the door or flap will be attached to when you place your order!
  Left hinge
  The fixed pivot is left,
  the door or flap opens
  from right to left.

• Material: Nirosta 1.4308
  
• Similar to DIN 6336
  
• Design: Smoothed and polished

- Temperature range: -30 °C to +80 °C- Elastomer Natural rubber- Strength class 5.6- Based on natural rubber- Hardness group approx. 55 Shore- Galvanised: For indoor and outdoor applications without direct weathering, but no substitute for stainless steel.- Application: For vibration and structure ...

• Similar to DIN 6336

- Temperature range: -30 °C to +80 °C- Elastomer Natural rubber- Strength class 5.6- Based on natural rubber- Hardness group approx. 55 Shore- Galvanised: For indoor and outdoor applications without direct weathering, but no substitute for stainless steel.- Application: For vibration and structure ...

• Steel / galvanised: For indoor and outdoor applications without direct weathering, but no substitute for stainless steel
  
  
• For stainless steel 1.4301: For indoor and outdoor applications with direct weathering
  
  
• After the tension hook has been hooked into the counter hook, the parts to be connected can be pulled together by up to 15 mm by tightening the handle part
  

• Without screwhole
  
• With anti-slip plate

• For setting up machines, etc.
  
• Foot plate and threaded spindle made of galvanized steel
  
• Rubber top (NBR) 80 Shore
  

• Material: Nirosta 1.4308
  
• Similar to DIN 6335
  
• Design: smoothed and polished

• Material, design:
  
• Handle lever made of cast aluminium G-ALSI 9 Cu 4
  
• Black, powder-coated
  

• Material:
  
• Lever made of die-cast zinc according to DIN 1743
  
• Nirosta steel parts, X 10 CrNiS 18 9=1.4305
  Design:
  

• Material:
  
• Tempered and ground locking pin
  
• Strength class 5.8.
  

• Without screwhole
  
• With anti-slip plate

• Galvanised: For indoor and outdoor use without exposure to direct weathering but not a substitute for stainless steel

• Material:
  
• Lever made of die-cast zinc according to DIN 1743
  
• Steel parts strength class 5.8.
  Design:
  

• thermoplastic glass-fibre reinforced
  
• Black hinge
  
• Bare Nirosta axis
  Important: You will need to know which side of the door or flap will be attached to when you place your order!
  Right hinge
  The fixed pivot is right,
  the door or flap opens
  from left to right.

• Material: Thermoset black
  
• Thermoset DIN 319
  
• Finish: highly polished

• Material: Thermoset FS 31, black
  
• Bushing: Brass or galvanised steel
  
• Design: Deburred and mirror polished

• The mounting hole is designed in such a way that the tilting D-handle can be attached from the operator side using a cylinder screw or a hexagonal nut

• Material:
  
• Handle lever made of glass-fibre reinforced plastic
  
• With toothed ring made of die-cast zinc