RESOL®

• The PSW Basic pump signal converter guarantees speed-regulated control of the PWM pump when changing from standard pumps to HE circulating pumps with PMW control, without replacing the controller.
  
• For solar and heating pumps
  
• Output signal PWM or 0-10 V
  

Alternative pump signal converter for standard solar pumps, PSW with HE pump, Wilo Yonos Para ST 25/7-180 ...

• Suitable for RESOL: DeltaSol, DeltaTherm
  
• PU = 10 pieces
  

• The digital VFD Grundfos Direct Sensors™ measure temperature and volume flow with just one measuring element and transmit the measurements directly via the RESOL-VBus® protocol. Grundfos Direct Sensors™ are suitable for use in both caustic media and drinking water and are thus ideal for volume flow and heat quantity measurement in solar and heating systems.
  
  Technical data:
  
• Material: Stainless steel 1.4408
  
• Protection type: IP20
  

• Suitable for water-glycol mixtures
  
• Blade wheel counter with magnetic coupling
  
• Incl. screw connections
  

• The digital VFD Grundfos Direct Sensors™ measure temperature and volume flow with just one measuring element and transmit the measurements directly via the RESOL-VBus® protocol. Grundfos Direct Sensors™ are suitable for use in both caustic media and drinking water and are thus ideal for volume flow and heat quantity measurement in solar and heating systems.
  
  Technical data:
  
• Material: Stainless steel 1.4408
  
• Protection type: IP20
  

• Analogue
  
• Scope of delivery:
  - Fittings
  - Insert
  - Connection cables
  

• For simple solar systems and solid fuel boilers
  
• For standard and high-efficiency recirculation pumps with PWM signal
  
• With 4 inputs and 2 outputs
  The DeltaSol® CS Plus has been specially developed for the speed-controlled control of high-efficiency pumps in standard solar and heating systems. It has two PWM outputs as well as an input for a Grundfos DirectSensor ™ VFD, which allows accurate heat quantity counting. The commissioning menu leads you through the most important settings for the initial configuration in only eight steps.
  Technical data:
  

• For simple solar systems and solid fuel boilers
  
• For standard and high-efficiency recirculation pumps with PWM signal
  
• With 5 inputs and 5 outputs
  Technical data:
  

• For a mixed or unmixed heating circuit with hot water loading and heat requirement.
  
• For standard and high-efficiency recirculation pumps with PWM signal.
  
• With 8 inputs and 4 outputs.
  Technical data:
  

• With 1 input and 1 output
  The RESOL TT1 thermostat compares the temperature recorded by a sensor with the switch-on temperature setting. If this temperature is not reached (heating mode), the relay switches on. When it is exceeded, the relay switches off. Depending on the switch-on and switch-off temperature, the controller works in heating or cooling mode. Electronic temperature controller (thermostat) with LC combination display to show the current temperature and the parameter settings (menu-controlled).
  Delivery contents:
  
• Incl. 1 sensor Pt1000 (FRP6)
  
  Technical data:
  
• Inputs: 1 temperature sensor Pt1000
  

• For a mixed or unmixed heating circuit
  
• For standard and high-efficiency Circulation pumps with PWM signal
  
• With 5 inputs and 3 outputs
  Technical data:
  

• The VBus®/USB adapter forms the interface between the controller and the PC. Equipped with a standard mini USB port, it facilitates fast transmission, representation and archiving of system data and setting of the controller parameters via the VBus®. A full version of the special RESOL ServiceCenter software is supplied.
  
  Technical data:
  
• Power supply: RESOL VBus®
  
• Data interfaces: VBus®
  

• With 2 inputs and 2 outputs
  
• Equipped with two high-load relays to which an electric heating element of up to 3.6 kW (230 V~) can be connected
  
• Regulates the time and temperature-controlled re-heating of a hot water storage tank
  

System controller for solar and heating systems DeltaSol® MX ...

• Expansion of the controller by 6 sensor inputs and 5 relay outputs
  
• LC display with 7-segment display
  
• Function control
  

• For simple solar systems with additional thermostat function for surplus heat utilisation or secondary heating
  
• With 4 inputs and 2 outputs
  
• Housing: plastic, PC-ABS and PMMA
  

• It is connected to the controller’s VBus® and emits a visual signal via a red LED if a fault occurs. The AM1 also has a relay output which allows connection to building control technology. A collective fault message can then be issued in the event of a fault. Depending on the controller and sensors, various fault statuses can be displayed, such as sensor failures, overpressure or underpressure faults and flow rate or dry running faults. This provides the optimal guarantee of output stability and operating safety of the system.
  
  Technical data:
  
• Outputs: 1 floating relay
  
• Switching capacity: max. 30 V (DC), 1A; 125 V~ (AC), 0.5 A
  

• Allows convenient access to the controller via the operator’s local network. This provides access to the controller, setting of the system parameters and reading of data from any network station. The VBus®/LAN interface adapter is suitable for all controllers with RESOL VBus®.
  
  Technical data:
  
• Power supply: input voltage
  
• Plug-in power supply unit: 100 ... 240VAC (50 ... 60 Hz)
  

• For medium-sized solar systems and solid fuel boilers.
  
• With 8 inputs and 7 outputs.
  
• Housing: plastic, PC-ABS and PMMA
  

• General accessories for solar stations
  
• Black EPDM drain hose, heat resistant
  Fits all standard DN 20 (3/4") safety valves
  
• Quick and easy installation
  

• Visualisation of system status
  
• Yield control
  
• Simplified fault diagnosis
  

• For complex solar systems and solid fuel boilers
  
• For standard and high-efficiency recirculation pumps with PWM signal
  
• With 4 inputs and 3 outputs
  Technical data:
  

• The PSW Basic pump signal converter guarantees speed-regulated control of the PWM pump when changing from standard pumps to HE circulating pumps with PMW control, without replacing the controller.
  
• For solar and heating pumps
  
• Output signal PWM or 0-10 V