TECO®

24 / 38 TECO®

Multiple variants

Connection ball valve for device connection

Immediately available

Polished and chrome-plated with thermal fittings fuse
Ball seals made of: Teflon
Spindle seals: O-ring made of NBR 70 ShA

Multiple variants

Gas shut-off ball valve for double pipe meter

Immediately available

DN 20 - DN 50
With a lead seal and lockable device
DIN-DVGW-approved

Multiple variants

Screw connections for gas shut-off ball valve

Immediately available

Multiple variants

Cover plate for K4 Duplex flush-mounted valve

Immediately available

Suitable for K4 Duplex flush-mounted valve
Dimensions (W x H): 135 x 90 mm

Multiple variants

Immediately available

According to EN 331 / DVGW
For gauge counter G2.5-G6
Operating pressure: 5 bar

Multiple variants

Thermal safety valve

Immediately available

IT x ET

Multiple variants

Gas shut-off ball valve for single-pipe meter, straight shape

Immediately available

According to EN 331 / DVGW
For gauge counter G2.5-G6
Operating pressure: 5 bar

Multiple variants

FASTEC® quick coupling system plug-in adapter AG

Immediately available

Patented quick coupling system
Fuses O-ring connection without Tools
Material : Brass

5x Gas flow monitors DN 25(1") 4m³/h + free 2x leak detector

Immediately available

Package consisting of:
5x Gas flow monitors DN 25 (1"), 15-100 mbar, 4 m³/h
Free of charge: 2x leak finder 400 ml spray can

Extension 23 mm for flush-mounted valve Duplex K4

Immediately available

Fits K4 Duplex flush-mounted valve
For extension by 23 mm - multiple extensions also possible

Flush-mounted water meter unit Teco K4CC MONO DN20(3/4") IG, with adapter L=80mm

Immediately available

Compact water meter installation section for flush-mounted installation, pre-assembled
With spacer pipe DN 20 (3/4”), length 80 mm
Shut-off ball valve with replaceable seal seat

Installation aid for flush-mounted ball valve Series Ultra

Immediately available

Can be used as an intermediate piece for precise dimensional arrangement of several ball valves
Centre distance: 100 mm
Spirit level for vertical and horizontal alignment included

Allgas socket 90° form, brass with integrated fire protection valve

Immediately available

External thread: DN 15 (1/2”)
Connecting gas stoves, -cookers, -grills, -baking ovens and -heating appliances
For all plug-in gas hoses with standard plug according to DIN 3383 Part 1

Extension set 20 mm, matches Ultra series

Immediately available

Material: plastic
Can be extended in multiple ways
ø: 49 mm

Gas plug valve TSV 1/2" 90° chromed

Immediately available

External thread: DN 15 (1/2")
Trigger temperature TSD: 96 °C
Response time: approx. 20 sec.

Multiple variants

Gas flow monitor

Immediately available

Model GST for domestic installation according to DVGW-VP305, as a measure to actively deter manipulation in accordance with TRGI
Technical properties:
Horizontal installation: for metal conductors and plastic pipes
Vertical installation: only for metal conductors, flow direct from bottom upwards
Operating pressure: 15-100 mbar
Operating temperature: -20°C to +60°C
Pressure loss: dp<0.5 mbar
Overcurrent: VL <30 lt/h at 100 mbar
External temperature resistance: 925 °C - 5 bar
Internal temperature resistance: 200 °C
Area of application: all gas types according to EN437 and DVGW G260/1
Function:
the flow monitor blocks the line when the flow rate selected is achieved. After the cause is rectified, pressure compensation occurs via an overflow opening, which enables the safety device to re-open.
Construction:
the internal springs do not come into contact with the flow of gas, which means they do not get dirty, ensuring a long service life. The overview opening is also protected in the open position to safeguard the re-opening function.
!!! Particularly low pressure loss (< 0.5 mbar) !!!
Flow direction from internal to external thread (I/E)

Multiple variants

Thermal safety valve TAS 21-ST/100

Immediately available

IT x ET

Multiple variants

Immediately available

According to EN 331 / DVGW
For gauge counter G2.5-G6
Operating pressure: 5 bar

Multiple variants

Gas ball valve with thermal isolation facility

Immediately available

Made of brass with full passage
Suitable for gas installations with low pressure (natural gas, mains LPG) gas, compressed air, fuels and heating oil
Operating pressure: 0.1 to 5 bar

Multiple variants

Ball valve, IT x IT with butterfly handle

Immediately available

For installations in the areas of drinking water, industry, cooling and heating (for measuring instruments with a sensor connection)
Suitable for drinking water in accordance with UBA whitelist
Operating pressure: 40 bar

Multiple variants

Gas flow monitors from external to internal thread

Immediately available

Model GST for domestic installation according to DVGW-VP305, as a measure to actively deter manipulation in accordance with TRGI
Technical properties:
Horizontal installation: for metal conductors and plastic pipes
Vertical installation: only for metal conductors, flow direct from bottom upwards
Operating pressure: 15-100 mbar
Operating temperature: -20°C to +60°C
Pressure loss: dp<0.5 mbar
Overcurrent: VL <30 lt/h at 100 mbar
External temperature resistance: 925 °C - 5 bar
Internal temperature resistance: 200 °C
Area of application: all gas types according to EN437 and DVGW G260/1
Flow direction from external to internal thread (E/I)

Chrome-plated plastic outside control handle, suitable for Series Ultra

Replacement item available

Suitable for Ultra Flush-mounted valves
Internal operating handle
ø 75 mm

Mounting set for gas twin-pipe meter with screw connection to Gas meter connection

Immediately available

Assembly unit for connecting gas twin pipe meter DN 25 x DN 32 (1 1/4”)
According to EN 331 / DVGW
Operating pressure: 5 bar

Multiple variants

Thermal safety valve TAS 21-ST/100

Immediately available

IT x IT