WOLF

• Incl. ball valve set and mounting rail

• Suitable for solar pump group 10
  
• For directly mounting on the hot water solar cylinder SEM-2

• Suitable for gas central heating solar condensing boiler CGW-2
  
• With pre-punched feedthroughs
  
• Incl. screws for installation by customer
  

• Suitable for Wolf: GG-2EK, GG-2E, TGG, TGG-K, GG-2E-S2001, GG-2EK-S2001
  
• Model: RLE120/0034
  
• Output: 60 W
  

• Required for CGB-2, if no hot water tank is connected
  
• Consisting of:
  - 2 x fitting reducer DN 20 (3/4") x DN 15 (1/2")
  - 1 x stainless steel corrugated pipe
  - 1 x shortening set, stainless steel corrugated pipe
  - 1 x flat gasket DN 20 (3/4")
  - 2 x flat gasket DN 15 (1/2")

• Suitable for gas condensing combi boiler CGB-2K and gas combi boiler CGU-2K
  
• Consisting of:
  - 1 x gas ball valve with TAS
  - 1 x straight-through service tap with fill and drain valve
  - 1 x straight-through service tap with fill and drain valve and connection for DN15 Safety valve (1/2")
  - 1 x Hot water connection piece
  - 1 x Cold water connection piece
  - 1 x Safety valve (response pressure 3 bar)
  - 1 x drain funnel

• Suitable for Wolf: RE 1.5 LN
  
• Model: 95.24236-0039
  
• Isolator: 7 x 57 mm
  

• For monitoring the dew point of each individual heating circuit
  
• Setting range: 75-100 % rH.
  
• Suitable for connection to MM-2, KM-2 V2, indoor unit CHA

• Suitable for Wolf: GB-E-20, GB-EK-20, GB-E-S-20, GB-EK-S-20, GBE-s2001, GB--EK-S2001, TGB-20, TGB-K20, TGB-11
  
• Dimensions: 65 x 115 mm
  
• Ref. no.: 8602132 replaces 3903144

• Suitable for Wolf: CGB-11/20/24/35/50/75/100, CGS-20/160, CGS-24/200, CGS-20/160, CGW-11/100, CGW-20/120, CGW-24/140
  
• Model: Temperature monitor combustion chamber lid 170°C
  
• Ref. no.: 8610011

• Suitable for gas central heating condensing boilers CGS-2L and CGS-2R
  
• With pre-punched feedthrough on left and right

• Suitable for gas condensing boiler CGB-2 75/100
  
• For direct connection to the gas condensing boiler
  
• Consisting of:
  - High-efficiency pump DN 32 (1 1/4")
  - Safety valves 3 bar
  - Shut-off valves incl. Thermometer
  - Connection for expansion tank DN 25 (1")
  - Fill and drain valves in the flow and return lines

• Suitable for Wolf: Flow sensor CGB/CGS/CGW/MGK-(2)/COB/TOB, return sensor GU-2/GG-2/TGU/TGG/CGU-2/CGG-2
  
• Ref. no.: 8603038 replaces 2741062

• Suitable for BSP, BSP-L and BDP-B stratified buffer tanks
  
• Can be mounted directly on the Tanks or on the wall
  
• Connections at the top: Clamp ring couplings 22 x 1 mm, DN 25 (1") AG, flat-sealing
  

- Suitable for Wolf: CGB/CGS/CGW-2 14-24 from 2016, CGB-2 38-55 from 11/2019- Ref. no.: 274586299 ...

• Suitable for Wolf: SW/FSW/CSW-70/120, TSW-120
  
• Dimensions: ø 33 x 330 mm
  
• Connection: M8 x 30 mm
  

• Add-on module for controlling systems with hydraulic deflector or cascade control. Can be used for up to 5 heat generators (depending on heat generator).
  
• Simple configuration of the controller by selecting predefined system variants
  
• Control of a mixer circuit
  

• Suitable for: Wolf GU-EK/E/1EK/1E, GG-1EK/1E
  
• Length: 300 mm
  
• Connection: 4 x 4 mm
  

• Suitable for Wolf: NG-31E-70, NG-31E-90, NG-31E-110
  
• Isolator: 7 x 42 mm
  
• Wire ø: 3 mm
  

• For CWL Excellent, CWL-2 and CWL-F/T Excellent ventilation units
  
• For measuring the relative Humidity
  
• Output signal: 0-10 V
  

• Antistatic and antimicrobial
  
• Material: Plastic
  
• PU: 10 units

• Extension kit for CWL-180 Excellent and CWL-F-300 Excellent ventilation units
  
• For the connection of:
  - Reheater coil
  - Air quality sensor
  - Humidity sensor
  - Smoke detector

• Antistatic and antimicrobial
  
• Material: Plastic
  
• PU: 10 units