WOLF

• Suitable for Wolf: EK01...NH, EL02...NH/H
  
• Isolator: 25 x 45 mm
  
• Wire ø: 1.2 mm
  

• For solar module SM1-2 and SM2-2
  
• For yield measurement via Δt and the flow rate set in the control

• Corner design
  
• Incl. screw connections
  
• Setting range: 50-500 mbar

• Suitable for Wolf: TGB-40, TGB-60 (for VL/RL), BWL, CEW
  
• Dimensions: 27 x 4 mm
  
• Ref. no.: 8602525 replaces 3903037
  

• Suitable for Wolf: GB-E/EK/S 20 from 16/2001, TGB/K 20 from 16/2001, TGB 40-60, CGB/K 11-24, CGS-20/160 and 24/200, CGW 11-60 from 16/2001
  
• Wire ø: 3 mm
  
• Wire length: 5 + 18 + 14 + 10 mm
  

• Suitable for Wolf: CGS-2L, CGW-2-14/20/24, CGB-2(K)-14/20/24 from constr. yr.. 09/2013
  
• Ref. no.: 207179099 replaces 2071790

Graphite seal- Suitable for Wolf: CGB-2 14-24, CGS/CGW-2 14-24 from 2016, TGB-2 20-30 from June 2000, TGB-2 40 from July 2021- Dimensions: 79.8 x 63.6 x 0.25 mm- Ref. no.: 207480299 ...

• Suitable for Wolf: CGB-75/100 up to manufacturer no. 0438 538993 from year of manufacture 07/06 to 10/08, CGB-75/100 from manufacturer no. 0438 538994 from year of manufacture 11/08 - 01/11,
  from model 02/11- 02/13 (from model no. 1021 663109) with extended HWWT, CGB-75/100 from model no. 1123 051258 from model no. 03/13
  
• Type: Sit 0340015
  
• Ref. no. 8751201
  

• Suitable for Wolf: Premio Plus 01C.1-3 MH (up to 25 kW)
  
• Insulator: 7/12 x 80 mm
  
• Wire ø: 2.0 mm
  

- Suitable for Wolf: CGB 35/50, TGB 40/60 from model year 11/01-02/06- Dimensions: Ø 223 mm x 36 mm- Ref. no.: 166824099 replaces 1668240 ...

• Suitable for gas condensing boiler CGB-2 75/100
  
• Cascade module KM-2 required
  
• Consisting of:
  - 1 x square hollow profile 140 x 140 mm
  - 4 x connection pieces DN 50 (2") AG, flat-sealing
  - 4 x transition pipework DN 50 (2") ÜWM x DN 40 (1 1/2") IG
  - 2 x connections for Deaerators and fill and drain valve, each DN 15 (1/2") IG
  - 1 x connections for thermowells DN 10 (3/8") IG
  - 1 x black heat insulation jacket
  - 1 x Deaerator, fill and drain valve, thermowells, flat gaskets, Wall brackets and installation material

• FHA monobloc + hot water tank and buffer tank
  - Complete solution for a detached house (new construction)
  
• 34 litre row buffer tank incl. overflow valve
  
• 180 litre hot water tank with smooth pipe heat exchanger (2.3 m²)
  

• Suitable for Wolf: MGK-130-300, NG-2P, NG-2PB
  
• Switching point: 110 °C
  
• Capillary length: 1000 mm
  

• Suitable for Wolf: SE-150 constr. yr. 09/84-11/86; SE-200-400 constr. yr. 09/83-05/87 SE-1-150-400 constr. yr. 01/87-09/02; SE1-500 constr. yr. 09/92-09/02; SE1-750 constr. yr. 04/94-09/02, SE-2 from constr. yr. Septem. 02, SEM-1/GS-1, SED 6/2, SIS 800, DS 5001, DS 8001
  To construction year 08/02
  
• Dimensions: ø 33 x 1070 mm
  
• Connection: DN32 (11/4“) with M 8 x 1 core
  

• For straightforward changing of a CGB-35/50
  
• For levelling out the height reduction of 40 mm

• DN 20 (3/4“)
  
• With cable gland and seal

• Suitable for Wolf: Premio 01B.1/2/3-MH (steel boiler)
  
• ø: 100 x 77 mm
  
• Length: 150 mm
  

• Max. operating temperature: 120°C
  
• Material: metal/polypropylene

• Suitable for gas condensing combi boiler CGB-2K and gas combi boiler CGU-2K
  
• Consisting of:
  - 1 x gas ball valve with TAS
  - 1 x corner service tap with fill and drain valve
  - 1 x corner service tap with fill and drain valve and with connection for DN 15 (1/2") Safety valve
  - 1 x Cold and hot water connection part
  - 1 x Safety valve (response pressure: 3 bar)
  - 1 x drain funnel

- Suitable for Wolf: CGB-2 14-24, CGB-2 38-55 from 11/19, CGS/CGW-2, MGK-2 130-170/300 from 03/15, MGK-2 800-1000 from 11/16, TGB-2-20-40, COB-2 15-40, TOB 18 from 01/14- Type: HCM-2 Heater Circuit- Ref. no.: 2745164 ...

• Suitable for CHA/FHA-Monoblock outdoor module
  
• Increases the stand of the outdoor module
  - Protects the outdoor module from soiling

• Suitable for gas condensing boilers (not for CGS-2) and CGU-2 boilers
  
• Consisting of:
  - 1 x gas ball valve with TAS
  - 1 x straight maintenance tap with fill and drain valve
  - 1 x straight maintenance tap with fill and drain valve and connection for safety valve DN 15 (1/2”)
  - 1 x safety valve (response pressure: 3 bar)
  - 1 x drain funnel

• Suitable for gas central heating condensing boilers CGS-2L and CGS-2R
  
• Partly pre-assembled
  
• Consisting of:
  - 1 x connection bracket variable, surface installation
  - 4 x stainless steel corrugated pipe (length: 800 mm)
  - 2 x connecting part hot water feed/return
  - 2 x double nipple DN 20 (3/4")
  - 2 x T-piece with vent DN (1/2")
  - 1 x double screw connection
  - 1 x condensate drainage pipe
  - 1 x 90° elbow DN 15 (1/2")
  - 1 x piping 90° DN 20 (3/4")
  - 1 x connecting part, gas
  - 1 x drain funnel R1
  - 1 x gas ball valve with thermal shut-off
  - 2 x continuous maintenance tap with fill and drain valve, safety group without pressure reducer (up to 6 bar network overpressure)
  - 1 x safety valve 10 bar

• Add-on module for control of a solar circuit
  
• In conjunction with Wolf heaters, greater energy savings thanks to intelligent storage replenishment charging, i.e. replenishment is blocked when solar yield is sufficient
  
• Heat quantity measurement with external heat meter