KNX System devices
62 131 69
Flush-mounted button interface, KNX RF+KNX, 2-way, 230 V AC design
Only a few items left in stock
- For installation in switch box, max cable length 100 m
- For use within the EU, 868 MHz
- KNX RF+ protocol in system mode
Multiple variants
Glass room thermostat Smart with colour display
Only a few items left in stock
- Suitable for 55 mm switch programmes
- Active colour display for function and status display
- Background colour w/b and display brightness adjustable
62 107 34
Rail-mounted devices MDT 16-fold binary input Input 24V AC/DC
Immediately available
- For connecting buttons, switches, window contacts
- New multi-jog function, sends up to 4 values/DPTs to the same or different objects
- Innovative group control with long/extra-long button press
62 131 95
VisuControl Pro touch panel software
Only a few items left in stock
- Full version of VisuControl Pro software, for individual programming of VisuControl touch panel
- This software is only available in English
62 131 70
Flush-mounted KNX RF+ radio-controlled blinds actuator, 10 A, 230 V AC
Only a few items left in stock
- Output: 300 W
- For installation in switch box, roller shutter motors 230 VAC up to 300 W
- With monostable relay, max current 10 A into ohmic load
62 131 94
Flush-mounted box for VisuControl touch panel, 10 inch, metal
Immediately available
- Size: 10"/256 mm
- Dimensions (W x H x D): 275 x 189 x 76 mm
62 131 74
Logic module REG, rail-mounted device
Only a few items left in stock
- Version in rail-mounted enclosure, with 4 freely configurable LEDs
- 24 independent function blocks, freely configurable
- Universal logic with up to 5 conditions
62 051 98
Flush-mounted MDT blind actuator 1-fold with binary inputs, 6A, 230V
Immediately available
- Supply voltage: via KNX bus 24V DC
- Max. switching capacity: 10 A with mono-stable relay at ohmic load
- Lockable manual operation and LED display per channel
62 051 99
Flush-mounted MDT blind actuator 1-fold 6A, 230V
Only a few items left in stock
- Supply voltage: via KNX bus 24V DC
- Max. switching capacity: 10 A with mono-stable relay at ohmic load
- Lockable manual operation and LED display per channel
Multiple variants
Area/line coupler REG, MDT
Immediately available
- Division units: 2
- Line coupling for connecting two KNX bus segments
- Fail safety via galvanic line disconnection
Multiple variants
Blind actuators REG 230 V AC, bis 600 W, MDT
Immediately available
- Supply voltage: via KNX bus 24V DC
- Max. switching capacity: 10 A with mono-stable relay at ohmic load
- Lockable manual operation and LED display per channel
Multiple variants
IP router with IP Secure and Data Secure, e-mail and time server function, rail-mounted, REG
Only a few items left in stock
- For bidirectional connection between PC and KNX via TCP/IP
- Allows 4 simultaneous connections
- Bus can be programmed via TCP/IP
Multiple variants
GIRA switch/blind actuator 16A Standard GIRA One & KNX REG
Only a few items left in stock
- Nominal voltage:
- KNX: DC 21-32 V SELV
- Switching capacity: AC 250 V, 16 A / AC1
Multiple variants
Hager switch actuator blind actuator 6A KNX UP
Immediately available
- Operating voltage via bus: 21-32 V DC
- For switching independent loads or controlling drives
- Rated current: 6 A
Multiple variants
Glass button II Light, RGBW, with temperature sensor
Only a few items left in stock
- Wide range of applications
- New multi-jog function, sends up to 4 values/DPTs to the same or different objects
- Innovative group control with long/extra-long button press
62 057 20
Cable set for Touch panels for connecting a network cable
Immediately available
- Suitable for model VCZ-AD07.01, 7”/177 mm, for connecting a RJ45 plug to a network cable
62 057 19
Metal flush-mounted box for Touch panels, size: 7 inch, WxHxD: 213x171x84mm
Immediately available
- Size: 7" / 177 mm
- Dimensions (W x H x D): 213 x 171 x 84 mm
Multiple variants
Jung push-button sensor module Universal F50 KNX
Only a few items left in stock
- Includes transparent covers, art. designation: A 50 NA
- Expandable with pushbutton expansion module art. designation A 509.. TSEM
- Assembly in device box with dimensions according to DIN 49073
Multiple variants
Jung automatic switch Standard 1.1 m Alpine white A3181WW KNX
Only a few items left in stock
- Control of lighting, room thermostats and other electrical loads indoors
- 2 PIR sensors
- Integrated brightness sensor
Multiple variants
Hager presence detector installation KNX UP
Only a few items left in stock
- Protection class: IP41
- Operating voltage via bus: 21-32 V DC
- Linking of several Detectors to extend the detection area
62 131 56
Flush-mounted switching actuator AKK compact fan coil, 10A A, 230 V AC, 14µF, 2 EB
Only a few items left in stock
- 3-gang switching actuator for installation in the switch box, version with monostable Relay
- Current max. 10 A with resistive load, 10 A with 14 µF/2EVG
- Fan coil operating mode:
- Control of 3-speed fans/fan coils
- Outputs interlocked with each other (changeover switching)
- Direct operation via three 1 Bits objects or single 1 Bit object (+/-)
- Automatic operation via 1-byte control value (0-100%)
- Can be used for 2-pipe systems and 4-pipe systems
- Output objects for controlling Heaters/cooling valves
- Day/night function for limiting the ventilation level at night
- Emergency operation in the event of control value failure
62 142 90
GIRA bus connector 3 KNX UP
Only a few items left in stock
- Protection class: III
- Installation depth: 22 mm
- Ambient temperature: -25 to +55°C
62 142 53
Hager heating actuator 6-way 24/230V KNX REG TYM646T
Immediately available
- Division units: 4
- Operating voltage via bus: 21-32 V DC
- Output voltage: 24-230 V AC
Multiple variants
Button interface BE, flush-mounted
Immediately available
- For connecting buttons, switches, window contacts
- Any input can be set to an output for 1.5 mA low-current LEDs (not with BE-02230.02)
- New multi-jog function, sends up to 4 values/DPTs to the same or different objects
62 131 96
VisuControl touch panel network connection cable set, 10 inch
Immediately available
- Suitable for VC-1001.04, 10"/256 mm
- For network connection to VisuControl touch panel with straight plug for VisuControl 10"
Multiple variants
Temperature sensor PT1000, accessories for SCN-RT 2/4 UP.01, SCN-RT6AP.01
Immediately available
- Probe for flush-mounted Thermostat / temperature sensor
- SCN-PTST1.01:
- PT 1000 Probe Standard
- Dimensions (ø x l) 4 x 30 mm
- Connection cable length: 1 m - SCN-PTST3.01:
- PT 1000 Probe Standard
- Dimensions (ø x L): 6 x 50 mm
- Connection cable length: 3 m
Multiple variants
Button Light 55 with temperature sensor
Immediately available
- Suitable for 55 mm switch programmes
- Buttons can be freely configured as button pairs or individual buttons
- One and two-button operation for switch, dimmer, blind, values
Multiple variants
Hager switch actuator blind actuator 16A KNX REG
Immediately available
- Operating voltage via bus: 21-32 V DC
- Switching current max.: 16 A
- Any combination of drive and switching functions possible
Multiple variants
Button Light 55 without temperature sensor
Immediately available
- Suitable for 55 mm switch programmes
- Buttons can be freely configured as button pairs or individual buttons
- One and two-button operation for switch, dimmer, blind, values
62 142 62
Berker bus connector carrying ring assembly KNX UP 75040001
Only a few items left in stock
- Operating voltage via bus: 21-32 V DC
- Operating temperature: -5 to +45°C
- Installation depth: 21.8 mm
Multiple variants
AKD LED controller, rail-mounted, 4 channel, RGBW, RE
Only a few items left in stock
- Absolute and relative dimmers for HSV colour space and RGB
- Tunable white colour temperature control
- Selectable dimming curve and PWM frequency up to 1000 Hz
Multiple variants
AKD LED controller 3/6 A, flush-mounted
Immediately available
- Absolute and relative dimmers for HSV colour space and RGB
- Tunable white colour temperature control
- Selectable dimming curve and PWM frequency up to 1000 Hz
Multiple variants
KNX RF+ radio-controlled glass button Plus with actuator
Only a few items left in stock
- Version with 4 sensor surfaces and LED for operating/status display
- Circulating orientation light
- Current max. 10 A with resistive load, 10 A with 14 μF/2EVG
Multiple variants
Berker push-button sensor Komfort Q.x with label panel KNX polar white
Immediately available
- Button functions include switching, dimming, roller shutter/blind, timer, priority, temperature setpoint shift, operating mode switching
- Value transmitter for dimming, position, brightness temperature values 1 and 2 byte
- Current consumption of bus (data transfer): max. 20 mA
Multiple variants
KNX RF+ radio-controlled switching actuator, 10 A, 230 V AC, flush-mounted
Immediately available
- For installation in switch box, version with monostable relay
- Max. current 10 A into ohmic load, 10 A into 14 µF/2 EB
- For use within the EU, 868 MHz
Multiple variants
Hager universal dimming actuator ESL/LED KNX REG
Immediately available
- Input voltage: 230 V AC
- Overheating/overload protection, display via LED
- Additionally for 62 142 49:
- Load coupling of 4 Ducts to increase the output power via parallel connection of the outputs
- Manual operation per Ducts via Button with integrated status LED, blocking of the KNX function