Screws metric, threaded rods, nuts, washers

• Strength class: 8.8
  
• DIN 912 / ISO 4762
  
• Cylinder head: Particularly suitable for use in hard-to-reach places
  

• Thread ø: 3.5 mm
  
• Head ø: 7.0 mm
  
• Drive: T15
  

• DIN 985 / ISO 10511
  
• Low shape
  
• With plastic ring
  

• DIN 985 / EN ISO 10511
  
• Self-locking
  
• Low shape
  

• d1: 12.5 mm

• DIN 472
  
• Stainless steel 1.4122: For indoor and outdoor use exposed to direct weathering and for use in damp rooms (e.g. kitchen and bathroom)

- With Screws- Galvanised: For indoor and outdoor applications without direct weathering ...

- Closed mould- Galvanised: For indoor and outdoor applications without direct weathering, but no substitute for stainless steel- PU: 100 pieces ...

- Application: For use with threaded rods without head.- Application: For wooden threaded rods with a ø of 16 mm- Drive: SW 11 ...

• Art. 316
  
• PU = 50 pieces
  
• Thread: M6
  

• Strength class: 10
  
• DIN 934 / ISO 4032
  
• Galvanised: For indoor and outdoor use without exposure to direct weathering but not a substitute for stainless steel

• Contents:
  Nuts DIN 934/8 / DIN/EN ISO 8673:
  
• ø 3 mm: 100 pieces
  
• ø 4 mm: 100 pieces
  

• DIN 84 / EN ISO 1207
  
• Strength class: 4.8
  
• Slotted:
  

- Strength class: 8.8- DIN 933 / ISO 4017- Galvanised: For indoor and outdoor applications without direct weathering, but no substitute for stainless steel- Fully threaded- Thread ø: 5 mm- Eyelet ø: 8 mm ...

• Strength class: 8.8
  
• DIN 912 / ISO 4762
  
• Cylinder head: Particularly suitable for use in hard-to-reach places
  

• DIN 472
  
• Design: Internal (for holes)
  
• Bare metal
  

• DIN 1052

• Application: Transverse reinforcement of large timber components, also for renovations
  
• Full thread: Pre-drill screw holes with 12 mm
  
• Galvanised: For outdoor application without direct weathering
  

• Strength class: 8.8
  
• DIN 931 / EN ISO 4014
  
• Thread: M14
  

• DIN 912 / EN ISO 4762
  
• Cylinder head: Particularly suitable for use in hard-to-reach places
  
• Partial thread: Suitable for fixing attachments. Thread-free part must be smaller than the thickness of the attachment
  

• Content:
  
• 4 x 15 x 1.25: 100 units
  
• 4 x 20 x 1.25: 100 units
  

• Brass head
  
• Length 20 mm
  
• ø 18 mm
  

- With wooden thread- Galvanised: For indoor and outdoor applications without direct weathering ...

• Dimensions:
  - Outer diameter (mm): 38
  - Inner ø (mm): 32
  - Thickness (mm): 2
  
• For easy loosening of the drill bit

• DIN 471
  
• Stainless steel 1.4122: For indoor and outdoor use exposed to direct weathering and for use in damp rooms (e.g. kitchen and bathroom)

• DIN 1052
  
• Galvanised: For internal and external applications, not exposed to direct weathering

• DIN 440
  
• From R
  
• Stainless steel A2: For indoor and outdoor use exposed to direct weathering and for use in damp rooms (e.g. kitchen and bathroom)
  

• Thread ø: 4.0 mm
  
• Head ø: 8.0 mm
  
• Drive: T20
  

• DIN 603
  
• With square head and hexagonal nut
  
• Half-round head: Suitable for wood on wood or wood on metal connections
  

- Thread: M8- Shape A- Length: 1 m- Strength class: 4.8- DIN 976 / ISO 965-2- Flank angle 60°- Galvanised: For indoor and outdoor applications without direct weathering but no substitute for stainless steel ...

• Strength class: 8
  
• DIN 934 / EN ISO 8673
  
• Galvanised: For indoor and outdoor use without exposure to direct weathering but not a substitute for stainless steel
  

- Galvanised: For indoor and outdoor applications without direct weathering ...

• DIN 6923
  
• Stainless steel A2: For indoor and outdoor use exposed to direct weathering and for use in damp rooms (e.g. kitchen and bathroom)

• DIN 933 / ISO 4017
  
• Hex head: Offers a very high power transmission during screwing
  
• Full thread: Guarantees high long-term resilience
  

• Art. 580
  
• Cast
  
• Application: For attaching cables, chains, trellis
  

• Strength class: 10.9
  
• DIN 931 / EN ISO 4014
  
• Thread ø: 16 mm