Shower drains and accessories

• Drain horizontally
  
• Can be shortened for renovation
  
• Features - removable odour seal, cleaning possibility for connection cable, outlet DN40 rotatable, junction piece to DN50
  

• Consisting of:
  
• 1x bath sealing tape 5.0 m
  
• 1x spacer tape, detachable adhesive 15x2 mm, 5.0 m
  

• For bonded waterproofing of floor-level, tiled shower surfaces
  
• Material: Brushed V4A stainless steel
  
• Installation height from 60 mm
  

• Traps material: ABS
  
• Covers material: Stainless steel
  
• Surface: Brushed stainless steel
  

• Water drainage above the bonded waterproofing
  
• Installation in the room or on the wall
  
• For tile structures from 13-35 mm
  

• Drain horizontally
  
• Renovation model
  
• Features - removable odour seal, cleaning possibility for connection cable, outlet DN40 rotatable, junction piece to DN50
  

• Traps material: ABS
  
• Covers material: Stainless steel
  
• Finish: Brushed stainless steel
  

• For compound sealing (tiled shower)
  with liquid film or sealing cuff
  
• Infinitely adjustable from 300 mm to 1200 mm
  
• Drain DN 50
  

• Water drainage above the bonded waterproofing
  
• Water drainage above the finished floor when using the sleeve
  
• Installation in the room or on the wall
  

• Made of stainless steel 1.4301
  
• Drainage rate: 48 litres/min.
  
• Water trap height: 35 mm
  

• Consisting of:
  
• 1x bath sealing tape 3.3 m
  
• 1x sound insulation tape 20x4 mm, 3.3 m
  

• Adjustable foot set only required for installation height from 95 mm
  
• Installation height 95 - 160 mm
  
• Model 4982.90

• Traps material: ABS
  
• Covers material: Stainless steel
  
• Surface: Brushed stainless steel
  

• Material: Stainless steel
  
• Shower drain can be adjusted in height, pitch and offset
  
• For installation in thin-bed mortar
  

• Outflow DN 50
  
• With height-adjustable stainless steel frame that can be rotated 360°
  
• Removable odour seal
  

• Horizontal drain
  
• Connection: DN50 on 3 sides
  
• Water trap height: 50 mm
  

• The Plancofix is a VDE-tested floor drain pump with shower channel that allows level/low showers to be installed even in places where it was previously not possible due to a lack of slope
  
• Complete set with pre-mounted sealing fleece
  
• The stainless steel channel can be shortened as required
  

• For bonded waterproofing of floor-level tiled shower areas
  
• With pre-assembled sealing tile
  
  Technical data:
  
• Connection option
  - Front
  - Lateral (left/right)
  

• Brushed stainless steel shower channel body with pre-mounted sealing fleece
  
• Incl. turning grate, optionally tileable or flat surface in brushed stainless steel
  
• Hair strainer
  

• For compound sealing (tiled shower) with liquid film or sealing sleeve
  
• Stainless steel 1.4301
  
• Load class K = 300 kg
  

• Without grate variant, which covers the plastic
  
• 93 004 10 - suitable for 93 185 96

• Vertical drain
  
• Connection DN50
  
• Water trap height: 50 mm
  

• Contour angular
  
• For flooring height of 6 - 15 mm (tile + adhesive)
  
• Stainless steel 1.4301
  

• Suitable for Evenes shower trays

- Can be opened- Suitable for shower channel Aqua Ambiente ...

• Material: stainless steel
  
• Surface: Brushed stainless steel
  
• Height adjustable by 10 mm
  

• Brushed stainless steel shower channel body with pre-mounted sealing fleece
  
• Incl. turning grate, optionally tileable or flat surface in brushed stainless steel
  
• Hair strainer
  

• Odour trap
  
• Hair screen
  
• Water trap tank

• Outflow DN 50
  
• With height-adjustable stainless steel frame that can be rotated 360°
  
• Removable odour seal
  

• Vertical drainage
  
• Features - removable odour seal, cleaning possibility for connection cable
  
• AL 10 (l / s) 0.9 - drain capacity 10 mm (according to DIN EN 1253)
  AL 20 (l/s) 1.1 - drain capacity 20 mm (according to DIN EN 1253)
  

• Traps material: ABS, PP
  
• Covers material: Stainless steel
  
• Surface: Brushed stainless steel
  

• For compound sealing (tiled shower)
  with liquid film or sealing cuff
  
• Infinitely adjustable from 300 mm to 1200 mm
  
• Drain DN 50
  

• Horizontal drain
  
• Connection: DN40 on 3 sides
  
• Water trap height: 30 mm
  

• Renovation model
  
• Height 70 - 95 mm
  
• Model 4982.91

• Traps material: ABS
  
• Covers material: Stainless steel
  
• Surface: Brushed stainless steel
  

• With integrated slope of approx. 2%.
  
• Integrated horizontal floor drain DN 40 (barrier water height 20 mm) with plastic frame 130 x 130 x 8.5 mm, 360 degree rotatable incl. stainless steel grate 120 x 120 mm, drainage rate 33 l/min
  
• Floor collar wheelchair-accessible, tile size for wheelchair use ≥ 50 x 50 mm