WOLF ventilation systems

• Automatic humidity control for bathrooms, cellars, garages, wine cellars, etc.
  
• Humidity difference controlled via indoor and outdoor sensor for automatic equalisation
  
• Universal humidity controller with 6 function programmes:
  - Trowels drying
  - Cutter
  - Interval ventilation
  - ΔT ventilation
  - Temperature Humidity Switches
  - Manual setting
  

• For insertion into ventilation ducts
  
• Constant volume flow even with changing pressure conditions
  
• For supply or exhaust air
  

• With smooth inner skin
  
• Antistatic and antimicrobial

• With heat recovery
  
• For flats, one and two-family homes
  
• With the cross counterflow heat exchanger (removable), the heat is taken from the waste air and transferred to the fresh intake air.
  

• Antistatic and antimicrobial
  
• Material: Plastic

• For using operating module BM-2 as remote control

• With smooth inner skin
  
• Length: 50 m roll

• Material: Expanded polyethylene
  
• Thermal conductivity (EN 12667): 0.041 W7mK
  
• Wall thickness: 16 mm
  

• 4 in 1 (automatic recognition of function on basis of system components)
  - Room temperature controller with day/week program
  - Remote control for home venting CWL Excellent / CWL 2 (simultaneous alongside room temperature control)
  - Remote control of all heating or mixer circuits (with BM/BM-2 in system)
  - Remote control for up to 7 individual heating circuits with multiple RM-2 (with BM/BM-2 in system)
  
• Illuminated touchscreen
  
• Integrated room temperature sensor
  

• Antistatic and antimicrobial
  
• Material: Plastic
  
• PU: 10 units

• For CWL-2 ventilation units for use with:
  - CO² sensor
  - Air quality sensor
  - Humidity sensor
  
• Input: normally closed contact 0-10 V
  
• Output: 24 V
  
  Note:
  - Housing for additional circuit board (order no.: 14 011 13) required

• With heat recovery
  
• For flats, one and two-family homes
  
• With the cross counterflow heat exchanger (removable), the heat is taken from the waste air and transferred to the fresh intake air.
  

• Nominal width: DN 125
  
• Length: 285 mm

• With heat recovery
  
• Floor-standing compact device for flats and houses
  
• With the cross-counterflow heat exchanger, the heat is removed from the exhaust air and fed into the fresh supply air
  

• Antistatic and antimicrobial
  
• Material: Plastic

• Antistatic and antimicrobial
  
• Material: Plastic

• Antistatic and antimicrobial
  
• Material: Plastic

• Suitable for UniAir 125R and UniAir 125Q supply and exhaust air valves

• Material: Expanded polyethylene
  
• Thermal conductivity (EN 12667): 0.041 W7mK
  
• Wall thickness: 16 mm
  

• Suitable for:
  - Air distribution hose DN 63 and DN 75
  - Flat duct 50 x 100 and 50 x 140
  - PU: 10 pieces

• Antistatic and antimicrobial
  
  Note:
  - Click and sealing ring required!

• For connection between flat duct and air distributor
  
• Antistatic and antimicrobial
  
• Material: plastic
  
  Note:
  - Sealing ring required

• With eBus connection for the heat source or room ventilation
  
• For wireless communication with RM-2 wireless or external sensor wireless

• Suitable for kitchen exhaust valve
  
• ISO Coarse 45% (G3)
  
• PU: 5 pieces

For DN 75 air distributor hose ...

• Transition to floor grid
  
• Antistatic and antimicrobial
  
• Air distributor hose connection: 2 x DN 75
  

• For direct connection to rigid pipe systems or devices
  
• Internal hose material: Insulation wool layer
  
• External hose material: aluminium
  

• Antistatic and antimicrobial
  
• PU: 10 units

• Nominal width: DN 125
  
• PU: 10 units

• Antistatic and antimicrobial
  
  Note:
  - Click and sealing ring required

For use of additional board (order no. 14 011 12) and Wolf LinkHome interface module (order no. 14 004 70) ...

• Antistatic and antimicrobial
  
• Material: Plastic
  
• PU: 10 units

• Suitable for floor grid connection element