Floor and cellar drains
- Flow capacity: 5.3 l/s
- Integrated frost-proof odour trap
- Class K3
- With odour trap
- With sludge trap
- Drain DN 100
- Flow capacity: 1.15 l/s
- With odour trap
- Load capacity up to max. 100 kg
- Flow capacity: 3 l/s
- Incl. odour trap
- Slotted grille
- Odour and cleaning closure
- Polypropylene connector with lip seal
- Stainless steel grate, 115 x 115 mm
- Flow capacity 0.62 l/s
- With removable odour trap
- Load capacity up to max. 100 kg
- Suitable for 93 074 26 - 93 074 28
- With tapping screws and flange seal
- For balcony and terrace drains
- With odour trap
- Load capacity up to max. 2000 kg
- PVC grille
- With odour trap
- With sludge trap
- Drain DN 100
- Connection: DN 50
- Discharge rate: 1.15 l/s
- Application: Indoor use
- For plastic and metal siphons
- Prevents siphons, which are not used for a long time, drying out
- Is non-toxic, non-flammable, biodegradable and has a pleasant scent
- Connection: DN 50
- Discharge rate: 1.15 l/s
- With click-on sealing sleeve in accordance with DIN EN 1253-1 and DIN 18534-1-W3-I
- Load capacity up to max. 300 kg (Class K3)
- Drain DN 100
- According to DIN EN 1253
- Load capacity up to max. 300 kg (Class K3)
- Drain DN 100
- According to DIN EN 1253
- System dimension 100
- Load capacity up to max. 300 kg (class K3)
- Attachment with stainless steel grate 100 x 100 mm
- Height-adjustable, rotatable and tiltable- Stainless steel grating 3 mm, 1.4301 V4a K3n (100 x 100 mm)- With moulded-on sealing fleece for optimum floor sealing connection- 50 mm water trap height- Pulling out the siphon insert creates a cleaning opening- Impact-resistant PP housing- For DN 100/90 ...
- System dimension 100
- Load capacity up to max. 300 kg (class K3)
- Attachment with stainless steel grate 100 x 100 mm
- System dimension 100
- Load class K = 300 kg
- Plastic frame
- Flow capacity: 1.8 l/s
- Load capacity up to max. 300 kg (class K3)
- Drain DN 100
- Suitable for cellar drain item no.: 93 702 85
- System dimension 100
- Drain DN 50 horizontal
- Sealing flange
- Drainage capacity: 0.45 l/s- Connection ø: 40 mm pipe end- Water trap height: 50 mm- With chrome-plated cover 225 x 75 mm ...
- Connection: DN 50/DN 100
- Flow capacity: 0.38 l/s
- With removable odour trap
- System dimension 100
- Load capacity up to max. 300 kg (class K3)
- Attachment with stainless steel grate 100 x 100 mm
- System dimension 100
- Drain DN 50 horizontal
- Sealing flange
- System dimension 100
- Drain DN 50 horizontal
- Sealing flange
- System dimension 100
- Load capacity up to max. 300 kg (class K3)
- Attachment with stainless steel grate 100 x 100 mm
- Made of plastic
- Incl. flat seal
- Connection: DN 50
- Discharge rate: 0.8 l/s
- With sealing sleeve in accordance with DIN EN 1253-1 and DIN 18534-1-W3-I
- Stainless steel grating 3 mm, 1.4301 V2A K3- 50 mm water trap height in accordance with DIN EN 1253- Pulling out the siphon insert creates a cleaning opening- Impact-resistant PP housing- For pipes DN 100, DN 90 and DN 50 and spigot end DN 110- Grates 120 x 120 mm ...
- System dimension 100
- Vertical drainage
- For compound sealing (tiled shower) with liquid film or sealing sleeve
- Load capacity up to max. 300 kg (Class K3)
- Drain DN 100
- According to DIN EN 1253
- Flow capacity: 1.8 l/s
- Load capacity up to max. 300 kg (class K3)
- Drain DN 100
- Visible stainless steel frames and Grates
- Rotatable grate 115 x 115 mm, tileable or flat satin finish
- With removable odour trap
- System dimension 145
- Load class K = 300 kg
- Dimensions (L x W x H): 150 x 150 x 5 mm
- Plancofix is a VDE-tested floor drainage pump that makes it possible to install ground-level/low showers in places where this was previously impossible because of a lack of downward incline
- Inlet from above as floor drainage or from side (e.g. with existing shower channel)
- Reversible cover in stainless steel or as tile