Rainwater utilisation

• Three-piece with seal
  
• Material: brass
  
• Size: DN 25 (1”) ET
  

• DN 100 with 3 x lip seal
  
• Hole cut-out: ø 127 mm
  
• Incl. hole saw set

• Made of plastic
  
• For reduction from plastic pipe to zinc pipe

• Suitable for rain stand pipes and downpipes in accordance with DIN 612

• - Suction 10 cm below the water surface, prevents premature silting up of the pre-filter
  - Incl. brass non-return valve
  - Incl. 2 pcs. Brass grommets
  - Incl. 2 pcs. Stainless steel hose clamps
  - Filter material: Stainless steel
  - Buoyancy ball: d=150 mm
  
• Mesh size: 0.23 mm

• Suitable for plastic underground storage tanks Basic and Comfort

• For installation in cistern or pre-filter shaft
  
• Collection filter basket with large retention capacity and fine filtering for large filter surfaces
  

• Three-piece with seal
  
• Material: brass
  
• Water butt bushing (tank screw connection)
  The European Drinking Water Directive 98/83EC defines a max. lead content in drinking water in the EU. The material used meets the most recent requirements of the European Directive, the restrictions on lead content was observed as a result.
  

• Includes almost all components (except for tank and pipes) for creating a rainwater usage system for garden irrigation and domestic water supply
  
  Delivery contents:
  (1) Purain Filter DN 100
  (2) Plurafit inlet calmer DN 100
  (3) Suction fitting with coarse filter DN 15 (1/2”)
  (4) 10 m Horizon suction hose DN 15 (1/2”)
  (5) Wall penetration DN 100
  (6) Rainmaster Eco 10
  
  Pump data:
  
• Nominal power: 90 W
  
• Max. flow rate: 600 l/h
  

for rain stand pipes DN 100 ...

• Only suitable for 7000 l storage tank
  
• Adjustable from 500 to 750 mm
  
• External ø: 770 mm
  

• Includes almost all components (except for tank and pipes) for creating a rainwater usage system for garden irrigation
  
  Delivery contents:
  (1) Plurafit filter with filter basket, tank installation DN 100
  (2) Fully automated underwater pump with integrated control
  (3) 5 m Horizon pressure hose DN 25 (1”)
  (4) Plurafit water connection and hose storage box
  (5) Plurafit cap
  
  Pump data:
  
• Voltage: 230 V / 50 Hz
  
• Nominal power: 900 W
  

• Specially developed for rainwater utilisation, fully automatic operation and monitoring station with ultra-low power consumption
  
• Optimised for use in single-family homes
  
• Compact construction with volume flow-optimised membrane pump, pump control and automatic, DVGW-tested drinking water supply pursuant to DIN 1989
  

• Automatically regulates the water level in the water butt by way of an overflow system
  
• Installation kit with connecting hose DN25 (1”) x 320mm, connection screw, barrel connection and end cap

• Galvanised
  
• Additional plastic coating on the inside
  
• With closed cleaning lid and long fitting DN 100
  

• Adjustable from 235 to 409 mm, less 50 mm for overlap with shaft neck
  
• External ø: 770 mm
  
• Class A: passable

• Separate level indicator specially for installation in RAINMASTER ECO
  
• Includes the display module, sensors and control line to the cistern
  
• The display module is simply mounted instead of the placeholder on the RM ECO.
  

• Automatically regulates the water level in the water butt by way of an overflow system
  
• Installation kit with connecting hose DN25 (1”) x 320mm, connection screw, barrel connection and end cap

• For INTEWA STANDARD systems we offer DIN 1989-1 compliant
  drinking water make-up feed in the cistern via a free outlet
  with slow-closing solenoid valves in ready-to-use feeding units
  in the size DN 15 (1/2“)
  
• Feeding unit with 24 V DC valve and RMD-24 fill level display
  
• Safety backfeed cutoff after 2 hours
  

• Ready-to-plug-in compact system for automatic rain water collection from one cistern
  
• HiMulti 3 P self-actuating centrifugal pump
  
• 11 L tank for fresh water feed with float valve
  

• For use in gardens, agriculture, etc.
  
• Can be extended in any direction
  
• The openings must be drilled using a hole cutter
  

• Length: 500 mm
  
• Suitable for plastic underground storage tanks Basic and Comfort

• Fully automatic rainwater utilisation and drinking water make-up feed
  
• Speed-controlled pump, making it particularly durable, quiet and economical in terms of power consumption
  
• DVGW-tested complete station
  

• Assumes the task of the level-dependent drinking water make-up feed
  and enables automatic operation of the rainwater system
  
• Adjustable make-up feed switch point
  
• Integrated, calibratable level display
  

• To avoid stirring up sediment as a result of rainwater supply
  
• To protect the pump and consumers
  
• Can be separated, making dirt removal possible once installed
  

• Inlet pressure max.: 6 bar
  
• Temperature max.: 80°C
  
• Open design: free outlet downwards
  

• Includes almost all components (except for tank and pipes) for creating a rainwater usage system for garden irrigation and household supply
  
  Advantages:
  
• No noise in the house
  
• Level gauge included
  

• Self-cleaning rainwater filter for cistern installation
  
• For single-family homes
  
• With stainless steel slotted sieve 0.8 mm
  

• Max. inlet pressure: 12 bar
  
• Maintenance-friendly piston control
  
• Temperature max.: 80°C
  

• Material: Titanium zinc mill-finish
  
• Incl. hose set DN 25 (1") (barrel connection + 330 mm 1" hose)
  
• Keeps the barrel filled to the desired level

• Material: Titanium zinc mill-finish
  
• With grip

• Rainwater utilisation systems for use in single and multi-family homes for the primary extraction and pressure boosting of rainwater from cisterns to supply toilets, washing machines and outdoor taps
  
• Bluetooth interface for connection to the GRUNDFOS® GO Remote app for advanced settings, reports and error logs Automatic diverter to drinking water storage tank in the event of a rainwater shortage
  
• Emergency overflow according to EN1717, AB
  

• Ready-to-plug-in compact system for automatic rain water collection from one cistern
  
• HiMulti 3 P self-actuating centrifugal pump
  
• 11 L tank for fresh water feed with float valve
  

• - Suction 10 cm below the water surface, prevents premature silting up of the pre-filter
  - Incl. brass non-return valve
  - Incl. 2 pcs. Brass grommets
  - Incl. 2 pcs. Stainless steel hose clamps
  - Filter material: Stainless steel
  - Buoyancy ball: d=150 mm
  
• Mesh size: 1.2 mm

• Includes almost all components (except for tank and pipes) for creating a rainwater usage system for garden irrigation and domestic water supply
  
  Delivery contents:
  (1) Purain Filter DN 100
  (2) Plurafit inlet calmer DN 100
  (3) Suction fitting with coarse filter DN 25 (1”)
  (4) 10 m SDS suction hose DN 25 (1”)
  (5) Wall penetration DN 100
  (6) Rainmaster Favorit 40 - SC with speed control
  (7) Expansion tank 5 litres
  
  Pump data:
  
• Nominal power: 800 W
  
• Max. flow rate: 4800 l/h