Accessories rainwater utilisation

• Material: Brass
  
• Incl. nuts and seals
  The European Drinking Water Directive 98/83EC defines a max. lead content in drinking water in the EU. The material used meets the most recent requirements of the European Directive, the restrictions on lead content was observed as a result.
  
• Suitable for drinking water in accordance with UBA whitelist

• Three-piece with seal
  
• Material: brass
  
• Water butt bushing (tank screw connection)
  The European Drinking Water Directive 98/83EC defines a max. lead content in drinking water in the EU. The material used meets the most recent requirements of the European Directive, the restrictions on lead content was observed as a result.
  

• Self-cleaning rainwater filter for cistern installation
  
• For single-family homes
  
• With stainless steel slotted sieve 0.8 mm
  

• - Suction 10 cm below the water surface, prevents premature silting up of the pre-filter
  - Incl. brass non-return valve
  - Incl. 2 pcs. Brass grommets
  - Incl. 2 pcs. Stainless steel hose clamps
  - Filter material: Stainless steel
  - Buoyancy ball: d=150 mm
  
• Mesh size: 1.2 mm

• Max. inlet pressure: 12 bar
  
• Maintenance-friendly piston control
  
• Temperature max.: 80°C
  

• DN 110 for 87/100 mm downpipe
  
• Visually perfect transition to downpipe
  
• Material: polyethylene
  

• Suitable for rain stand pipes and downpipes in accordance with DIN 612

for rain stand pipes DN 100 ...

• Galvanised
  
• Additional plastic coating on the inside
  
• With closed cleaning lid and long fitting DN 100
  

• For plastic cleaning lid
  
• For subsequent connection of HT cleaning pipes, DN 75 and above
  
• For discharging waste water from condensing boilers, sinks, washing machines etc.
  

• Open and flexible for sliding between standpipe and downpipe
  
• Oblique or uncleanly cut standpipe ends are covered
  
• Also suitable for retrofitting by bending

• Automatically regulates the water level in the water butt by way of an overflow system
  
• Installation kit with connecting hose DN25 (1”) x 320mm, connection screw, barrel connection and end cap

• Automatically regulates the water level in the water butt by way of an overflow system
  
• Installation kit with connecting hose DN25 (1”) x 320mm, connection screw, barrel connection and end cap

• Suitable for non-return valves 90 031 01 - 07

• Material: Titanium zinc mill-finish
  
• With grip

• Material: Titanium zinc mill-finish
  
• Incl. hose set DN 25 (1") (barrel connection + 330 mm 1" hose)
  
• Keeps the barrel filled to the desired level

• Assumes the task of the level-dependent drinking water make-up feed
  and enables automatic operation of the rainwater system
  
• Adjustable make-up feed switch point
  
• Integrated, calibratable level display
  

• For installation in cistern or pre-filter shaft
  
• Collection filter basket with large retention capacity and fine filtering for large filter surfaces
  

• - Suction 10 cm below the water surface, prevents premature silting up of the pre-filter
  - Incl. brass non-return valve
  - Incl. 2 pcs. Brass grommets
  - Incl. 2 pcs. Stainless steel hose clamps
  - Filter material: Stainless steel
  - Buoyancy ball: d=150 mm
  
• Mesh size: 0.23 mm

• Three-piece with seal
  
• Material: brass
  
• Size: DN 25 (1”) ET
  

• For INTEWA STANDARD systems we offer DIN 1989-1 compliant
  drinking water make-up feed in the cistern via a free outlet
  with slow-closing solenoid valves in ready-to-use feeding units
  in the size DN 15 (1/2“)
  
• Feeding unit with 24 V DC valve and RMD-24 fill level display
  
• Safety backfeed cutoff after 2 hours
  

• Separate level indicator specially for installation in RAINMASTER ECO
  
• Includes the display module, sensors and control line to the cistern
  
• The display module is simply mounted instead of the placeholder on the RM ECO.
  

• To avoid stirring up sediment as a result of rainwater supply
  
• To protect the pump and consumers
  
• Can be separated, making dirt removal possible once installed
  

• Inlet pressure max.: 6 bar
  
• Temperature max.: 80°C
  
• Open design: free outlet downwards
  

• Made of plastic
  
• For reduction from plastic pipe to zinc pipe